Signal Conditioners

Alliance's Latest S2A LVDT Signal Conditioners Come with Cyber Security Tamper Prevention
Signal Conditioners

Alliance's Latest S2A LVDT Signal Conditioners Come with Cyber Security Tamper Prevention

Alliance’s S2A LVDT signal Conditioners are designed to work with range of LVDTs, RVDTs, and inductive half-bridge sensors. Units provide push button calibration, built-in null indication, four excitation frequencies, eight analog DC outputs and color coded plug-in connections. Conditioner’s diagnostic features include shorted primary, common hook-up errors and real-time calibration. The...

Read More »
New SC-200 LVDT Signal Conditioner Features Cyber Security Tamper Prevention Option
Signal Conditioners

New SC-200 LVDT Signal Conditioner Features Cyber Security Tamper Prevention Option

SC-200 LVDT Signal Conditioner is embedded with internal microprocessor, hot swap and advanced master/slave capability. Unit is designed to work with LVDTs, RVDTs, inductive half-bridge sensors and LVRTs. The conditioner provides four excitation frequencies, 8 analog DC outputs, null indication and push button calibration using position sensor. Unit comes with diagnostic and fault or failure...

Read More »
Rotation Speed Monitor detects signal up to 30 V.
Signal Conditioners

Rotation Speed Monitor detects signal up to 30 V.

Offering input frequency of 50 kHz, Rotation Speed Monitor is housed in 6 mm wide and 97 mm high enclosure. Detecting signals from NAMUR and SN sensors and measuring data from 2-wire DC sensors, unit comes with optional terminals or power bus. Equipped with restart inhibit, DIP switch and start-up override, product is embedded with S0 interface. Operated from ambient temperature to 70°C, Monitor...

Read More »
SC-100 Signal Conditioners are self-diagnostic to LVDT winding failures.
Signal Conditioners

SC-100 Signal Conditioners are self-diagnostic to LVDT winding failures.

Featuring 2.5, 5.0, 7.5, and 10.0 KHz excitation frequencies and 0-5, 0-10, ±10, 0.5 - 4.5, 1-5, 0.5- 9.5 VDC analog outputs, SC-100 Signal Conditioners work with LVDTs, RVDTs and inductive half-bridge position sensors. Providing 4-20 mA or 0-20 mA current loop DC outputs and 15-30 VDC power input options, units come with front panel push buttons for easy calibration. Conditioners are compatible...

Read More »
AMC902 IF Signal Conditioning Unit provides programmable gain.
Signal Conditioners

AMC902 IF Signal Conditioning Unit provides programmable gain.

Combined with MicroTCA sub-system for radar, SIGINT and data acquisition applications, AMC902 dual-channel IF Signal Conditioning Unit is controlled by using on-board management processor through base interface GbE or front-panel management port. Product can be used up to 15 GHz bandwidth and 56 GSPS. AMC902’s backplane is rooted with clock inputs via crossbar switch.

Read More »
SC-100 AC-LVDT Signal Conditioner features front panel pushbuttons.
Signal Conditioners

SC-100 AC-LVDT Signal Conditioner features front panel pushbuttons.

Offering 2.5, 5.0, 7.5, and 10.0 KHz of excitation frequencies, SC-100 AC-LVDT Signal Conditioner features RS-485 digital communication port. Designed with 0 -5, 0 -10, +/-10, 0.5 - 4.5, 1- 5, 0.5 - 9.5 VDC analog DC outputs and 4-20 mA or 0-20 mA current loop DC outputs, unit’s internal microprocessor eliminates need for calculating jumper settings of gain and range. Unit comes with 15-30 V DC...

Read More »
S1A AC-LVDT Signal Conditioner has self-diagnostics.
Signal Conditioners

S1A AC-LVDT Signal Conditioner has self-diagnostics.

Offering 4 excitation frequencies, 8 analog DC outputs and RS-485 port, S1A AC-LVDT Signal Conditioner provides speedy LVDT setup with built-in null indication. S1A is compatible with AC-LVDTs, RVDTs and inductive half-bridge sensors including 3-wire GE LVRTs and GE gas turbine LVDTs. Unit is fully calibrated with the position sensor. S1A is programmed to detect output errors and drive analog...

Read More »
Signal Conditioners feature SIL 3 certification.
Signal Conditioners

Signal Conditioners feature SIL 3 certification.

Produced according to SIL specifications for functional safety in all phases of product life cycle, 0(4)-20 mA MACX Signal Conditioners convert, isolate, filter, and amplify analog signals. Two-way, input-loop-powered isolators allow operation on active sensor technology with supply voltage of 6–30 Vdc and do not require additional power supply. Single- and 2-channel variants are available with...

Read More »
High-Density Signal Conditioners supports Bluetooth configuration.
Signal Conditioners

High-Density Signal Conditioners supports Bluetooth configuration.

Offering up to 0.05% accuracy, microBlox™ uB isolated signal conditioning modules safely interface voltage, current, temperature, frequency, and other field signals withÂ- Ã‚±5 V or 0–5 Vdc output to host measurement and control systems. Modules also include those with fixed ranges or wireless configuration via Bluetooth® on Android®/iOS® mobile device....

Read More »
Signal Conditioner measures voltage difference over sum.
Signal Conditioners

Signal Conditioner measures voltage difference over sum.

Able to measure secondary voltage difference over sum (Va-Vb)/(Va+Vb), LVC-4500 Ratiometric Signal Conditioner supports ratiometric AC LVDTs and RVDTS with constant sum of secondary voltages. Standalone unit is suited for use with LVDTS in extreme conditions that have high temperature variations and require cable runs in excess of 100 ft. LVC-4500 provides voltage, current, and digital RS-485...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers