Shoulder Screws come in metric sizes.
Shoulder Screws

Shoulder Screws come in metric sizes.

Suitable for variety of construction uses, ISO 7379 Hardened Steel Shoulder Screws are made of blackened steel with tensile strengthÂ- of 1,200 N/mm². RoHS-compliant screws come in range of head sizes from 6–24 mm diameter, with threads from M5–M20, and shoulder lengths from 10–100 mm.

Read More »
Driving Screws into Hardwood Should be Easy
Framing / Self Drilling Screws

Driving Screws into Hardwood Should be Easy

As harder and harder woods were introduced to the woodworking industry, the result was an increase in labor of piloting holes. Quickscrews International CEO & Founder Greg Wiener witnessed people using drywall and sheet metal screws in wood, thinking this could solve the problem. He knew there was a better solution. Putting a Type 17 point on a coarse thread screw allows that screw to be...

Read More »
Bearing Locking Screws feature sanitary design.
Bearing Components

Bearing Locking Screws feature sanitary design.

Available in sizes Â-¼-28 x 5/8, 5/16-24 x 5/8, and 3/8-24 x 1 in., KleanCap™ Screws offer alternative to socket-head screws typically used to lock insert bearings onto shafts. Units have raised-hex head that eliminates traditional socket design which can harbor bacteria. For more positive installation, screws are installed with hex driver rather than Allen...

Read More »
REMFORM Screw Reduce the Cost of Plastic Components Assembly
Screws

REMFORM Screw Reduce the Cost of Plastic Components Assembly

Remform screws from Arnold Umformtechnik GmbH & Co. reduce the overall assembly cost of plastic parts as they do not require nuts or inserts. They furthermore ensure the highest levels of assembly security, due to a specific design that creates a large difference between the forming torque and the stripping torque. The main application of REMFORM for plastic parts assembly is the automotive...

Read More »
Drywall Screws

Grabber's Unique Scavenger Head Screws Save Time and Labor Costs

New Coarse Thread Design Reduces Paper Burrs and Lasts Longer Alpine, UT - www.grabberman.com/ , an international distributor of professional-grade fasteners and construction products, announces the expansion of its pioneering line of Scavenger® Head Screws with Grabber's exclusive head design, which reduces paper burrs in drywall. Until recently, Scavenger screws were only available in fine...

Read More »
Funnel Head Screws feature self-tapping, self-setting design.
Framing / Self Drilling Screws

Funnel Head Screws feature self-tapping, self-setting design.

Targeting woodworking market, Multi-Purpose Spiral Point Funnel Head ScrewsÂ- fasten medium-density fiber board and other manmade woods without splitting or bubbling. Head also sinks into melamine and particleboard without chipping or need for pilot hole. In addition to Type 17 Auger Point that collects wood dust and keeps bore clean, self-drilling screws have deep cut reverse spiral thread...

Read More »
Captive Screws

PCB Terminals use SEMS screws to secure wires.

Rated at 15–30 A, PCB Screw Terminals feature anti-rotation, non-rocking design making them suitable for high density packaging. SEMS screw incorporates captivated, free-spinning lock-washer to eliminate wire twisting upon tightening terminals. Manufactured from brass with tin-plated finishes, terminals are supplied with SEMS installed or unassembled. SEMS screw units are available in...

Read More »
High Precision Adjustment Screws offer sub-micron sensitivity.
Screws

High Precision Adjustment Screws offer sub-micron sensitivity.

Allowing full 0.5 in. of travel, AJS-254-TPI Series optimizes alignment and stability for ULTIMA® and SUPREMA™ optical mirror mounts and ULTRAlign® precision positioning stages. Stainless steel threads are mated with collet and proprietary lubricant, which minimizes elastic effect for accurate movement. Providing 20 lb load capacity, screws are non-locking and are available with...

Read More »
New Line of #6 Screws in Square Drive
Screws

New Line of #6 Screws in Square Drive

Quickscrews International Corporation in Livermore, California is proud to announce their new line of #6 screws in square drive. The screws are offered in lengths starting at Â-½” and go up to 1-3/4”. They all feature the type 17 point and are all available in a Zinc plated finish. Some sizes are also available in a Nickel plated finish. You can find more information by logging onto...

Read More »
Screws

Countersunk Screw helps extend mould service life.

Intended for thermal insulating sheets, Countersunk screw Z330/... has incorporates hexalobular internal driving feature (Torx®) to ensure optimum force transmission. Thread sizes are coordinated to suit HASCO thermal insulating sheets Z121/..., Z1212/..., and Z1213/..., and star-shaped Torx® geometry in screw heads transmitsÂ- vertical torque. Despite torque absorption, damage...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics