New Relays Products

Exit Delay meets all firecodes.

iMXD integrated door movement exit delay package includes built-in delay electronics, audible alarm, and keyswitch for reset and authorized release in stainless steel housing. It can be configured to meet local and national firecodes governing delayed exit. Exit delay can be reset via keyswitch or automatically upon door closure, without need for additional external switches. It uses no moving...

Circuit Monitor detects oscillatory and impulsive transients.

POWERLOGICÃ-® Series 4000 permanently mounted circuit monitor with transient detection (CM4000T) automatically generates alarm so that action may be taken to correct problems before facility shuts down. It detects and captures oscillatory and impulsive transients (up to 10,000V peak, line-to-line) as short as 1 microsecond in duration. CM4000T maintains historical record of number of...

Power Relay is available with Class F insulation.

AZ761 10A, SPDT miniature power relay requires 250 mW of coil power and runs approximately 10 deg C cooler than standard AZ761 relay. With isolation spacing of 10mm and dielectric strength of 5000 Vrms, it has full UL, CUR and VDE approvals. Relay is suited for many HVAC and white goods applications where high ambient temperature might pose problem for other relays.

Solid-State Switch allows mechanical operation.

Solid state switch can be supplied with maximum of 100 psi or 29.9 in. Hg. Adjustment ranges from 0.5 to 100 psi or 1 to 28 in. Hg. Integrated circuit, actuated by magnet located in operating plunger, produces digital output. Supply voltage is 4.5 to 24 Vdc. Mounting styles are flush mount, panel mount, pipe thread and manifold mount.

Knobs, Handles & Grips

Read About Our Range Of Knobs, Handles, and Grips

Overload Relays have ranges from 0.1 to 630 Amp.

Solid-state Sirius 3RB10 relays are self-powered with integrated current transformers. They are available in class 10 or 20 trip class with manual/automatic reset or manual reset only. Relays have 4:1 ratio on current setting, enabling one device to cover wide range of currents. They also include phase-loss protection, tripping within 3 seconds upon detection of phase loss. There is no power loss...

Reed Relay has >10E+14 ohms insulation resistance.

Low-profile CR-Series leadless 50 Ohm reed relay switches at speeds up to 6 GHz with less than 40 ps rise times. To eliminate potential packaging stress, it is made with ceramic case that matches thermal coefficient of expansion of reed switch glass and reed lead. Capable of withstanding reflow soldering operations up to 260 deg C, it uses no internal solder, and has 1 microV typical thermal...

Tagging Relays operate circuit breakers remotely.

Series 24 and 31 for automated power distribution systems are available with 2 or 3 positions, and have orange hot-line safety tags. Relays may be operated manually, electrically, or remotely. Two-position models offer Normal and Tagged positions, while three-position models have Closed, Open, or Tagged positions. All allow bi-directional operation and have 2 N/O and 2 N/C contacts per deck....

Relays come with compatible sockets.

Electromechanical Relays and Sockets are available for automotive, appliance, copier, fax, office machine, HVAC, light duty and general purpose applications. Line has relays with different switching characteristics and ratings, along with socket combinations, for variety of applications, including several terminal, wiring, and PCB, mounting options.

General Purpose Relay switches loads up to 15 amps.

Series OEG PCLH-2 is available with plug-in terminals for socket mounting and printed-circuit terminals for board mounting. Silver-alloy contacts are double-pole, double-throw form C, and are rated 15 A @ 120 Vac resistive and 10 A @ 250 Vac or 30 Vdc. AC coils are available from 6 to 240 V and DC coils from 6 to 110 V. Enclosed relay is suitable for electrical panels, factory automation...

Contactors and Relays handle up to 630 A.

Large frame Sirius 3R contactors and overload relays for motor controls are available in 3 sizes rated from 115 to 500A. Contactors have easy access ac/dc coil system with universal current coil rated for both ac and dc voltages. Only 13 different coil ranges cover control voltages from 24 to 600V ac and dc. Overload relays are rated from 50 to 630 A full load and are available in starter or...

Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics

Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.