Latching Power Relay suits HVAC applications.

Latching Power Relay suits HVAC applications.

Available in single and dual coil versions, AZ2500, 50 A, single pole single throw (SPST) relay handles up to 12,500 VA (50 A at 250 Vac). With dielectric strength of 4,000 Vrms from contact to coil, product requires 50 msec pulse to set or reset. Coil connections are made via PCB terminals with power connections made via heavy bus type rigid terminals. Applications include UPS systems, lighting...

Read More »
Intrinsically Safe Relay offers low power switching.

Intrinsically Safe Relay offers low power switching.

Model SSR-15 is completely encapsulated in polysulfone housing and sealed with epoxy, making it impervious to dust, moisture, and foreign material. Operating and load voltage range from 105-125 Vac, and maximum load current is 5 A. Normally open, SPDT relay features temperature range of -40 to +120Â-

Read More »
Miniature Power Relay has high sensitivity and high insulation.

Miniature Power Relay has high sensitivity and high insulation.

Available in 1 Form A, 1 Form C, and right-angle versions, 6A-class FTR-LY relay has 170 mW nominal coil power and contact rating of 250 Vac. Designed with minimal piece parts and coil terminal over-molding, product has 27.8 x 4.9 mm footprint and minimum of 8 mm creepage and clearance distance from coil to contact. Mechanical life is rated at 10 million operations at 250 Vac, 6 A resistive load...

Read More »
Differential Relay suits transformer applications.

Differential Relay suits transformer applications.

Incorporating selectable transformer winding configuration, selective tripping of high/low-side breakers, and breaker health monitoring, iXP-420 also includes Virtual Test Set(TM) event record simulator. Protection features include over-excitation (V/Hz), under/over-voltage, phase overcurrent, negative-sequence overcurrent, and breaker fail-to-trip/fail-to-close indicators. Unit comes with IDEA...

Read More »
Solid-State Relays provide start-stop, on-off switching.

Solid-State Relays provide start-stop, on-off switching.

Totally encapsulated, Series SSR is impervious to shock and vibration and can be mounted anywhere. Units amplify current handling capabilities on pressure, level, and flow sensors. Each features SPST, normally open switch operation. Models SSR-25 and SSR-210 operate from 24-260 Vac with max load of 5 A and 10 A, respectively. Model SSR-312 operates from from 100-130 Vac with max load of 5 A, and...

Read More »

Relays meet IEEE 587 requirements.

AZ8 and AZ942H relays meet 6 kV lightning surge test outlined in IEEE 587. Relays withstand positive and negative 1.2 x 50 Â-µs, 6 kV unidirectional pulses and 0.5 Â-µs-100 kHz, 6 kV ring wave from contact to coil. Relays have 3 kV rms dielectric strength rating from contact to coil. High surge-voltage withstand capability is desirable in devices that are connected to AC mains, such as...

Read More »
Coaxial Tree Relay Modules offer 1 or 4 coaxial trees.

Coaxial Tree Relay Modules offer 1 or 4 coaxial trees.

Model SMP6103, with one 1 x 31 Coaxial Tree, and SMP6301, with four 1 x 4 Self-terminated Coaxial Trees, ensure that crosstalk and isolation specifications are maintained by using RF relays with bandwidths that exceed 2 GHz. Offered with low-loss coaxial interconnect cabling, modules are configured to avoid unterminated stub effects. Additionally, modules can be combined with other SMIPII(TM)...

Read More »
Safety Monitoring Relays operate with up to 11 safety outputs.

Safety Monitoring Relays operate with up to 11 safety outputs.

Model SR18A relays offer dual channel inputs with 3 configuration possibilities, 5 safety outputs, selectable automatic/manual reset function, and 2 auxiliary outputs for status monitoring. Units are 90 mm wide, mount to 35 mm DIN rails, and contain 5 LEDs for status and diagnostic indication. Models SR19E units offer 3 additional safety outputs, automatic reset function, and 1 less status LED...

Read More »
Relays are DIN-rail mountable.

Relays are DIN-rail mountable.

Industrial Relays, available in 24 Vdc, 120 Vac, and 240 Vac coil voltage, feature bifurcated contacts for low-current switching capability. Sockets include holding clips to secure relays and protect against accidental relay disengagement. LED indicators facilitate troubleshooting. Some relay models include internal surge protection diode to protect against voltage surges.

Read More »
Control Relays feature Category 4 safety rating.

Control Relays feature Category 4 safety rating.

Safe 2.2 Series features 22.5 mm housing, LED visual indicators for state of operation, power indication for both channels, opposite polarity between channels, and 2 normally open safety contacts. Relays are suited for applications where safety mats, safety edges, or E-stop controls are utilized.

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics