New Regulators Products

Low Dropout Regulator targets automotive applications.

Providing 5 V fixed output voltage, Model SPX2975 delivers up to 400 mA of continuous output current and comes in thermally enhanced TO-263 surface-mount package. Part offers low noise output of 40 Ã-µVRMS and dropout of 250 mV for 300 mA output current. Operating from 5.5-42 V with extended temperature range of -40 to +150Ã-

Low Dropout Regulator supports 1.5 and 1.8 V.

Model SP6201 provides output voltages down to 1.5 V fixed, and adjustable output from 1.25-5 V with less than 320 mV dropout at 200 mA. It consumes 28 Ã-µA quiescent current and 10 nA current conumption in shutdown, extending battery life. Operating over input voltage from 2.5-6 V, unit is suited for portable applications such as cell phones, PDAs, pagers, and digital still cameras. It...

Regulators control pressure and ensure gas purity.

Smart Indicating Regulator(TM) Series features purifier built onto output that prevents contamination of gas stream and serves as early warning of impurities. If gas contains contaminants, or if contaminants enter gas stream during cylinder change out, purifier media begins to turn color. When all media changes color, purifier is depleted and cartridge should be changed. Units include 2-stage...

Low Dropout Regulator features dropout voltage of 300 mV.

Model LT3024 low dropout, micropower regulator offers both 500 and 100 mA outputs. It operates from input voltage of 1.8-20 V, delivering dual outputs at voltages as low as 1.22 V. With 0.01 Ã-µF bypass capacitor, output noise is 20 Ã-µVRMS over 10 Hz to 100 kHz bandwidth. Suited for battery-powered systems, low 30 Ã-µA quiescent current per channel helps regulator maximize battery...

Adhesive Tapes for Energy & Utility Applications

Read about the various types of tapes used in energy and utility applications.

PWM DC/DC Regulator provides 600 mA output current.

Housed in 3 x 3 mm MLFTM and MSOP 10-lead packages, 2 MHz PWM DC/DC step-down regulators provide power to low-voltage chip sets in space-sensitive applications. Model MIC2202 synchronous buck regulator steps voltages down from 2.3-5.5 V input and operates with 1 Ã-µF ceramic output capacitor and 2.2 Ã-µH chip inductor. Model MIC2204, similar in function to MIC2202, operates with 4.7...

Regulators suit heating, cooling, and 3-way applications.

Self-operated Series 2000 features 1-piece, hardened stainless steel plug and shaft; full ported and full flow bronze bodies; galvanized iron union ends; and copper bulb with 8 ft armored capillary. Spring-loaded, self-adjusting packing assembly includes TeflonÃ-® chevron type packing. Sizes range from Ã-½ to 2 in. with single or double seats, direct or reverse acting, and 2 or 3-way...

Steam Regulators eliminate need for 1/3-2/3 systems.

Able to handle fluctuating demands that require low turndown on some days and high flow on others, G Series Regulators provide 95% accuracy for minimal droop and have few moving parts. They are available air loaded in cast iron, bronze, carbon steel, and stainless steel in sizes Ã-½-4 in. Integral pilot or temperature regulator versions are available in cast iron. All versions offer 100:1...

Switching Regulator is designed for CPU power.

Series SR50 consists of 5-bit, adjustable, synchronous, non-isolated, step-down DC/DC converters that support 6 Voltage Identification (VID) codes and choice of 2 physical configurations. Input and output ranges from 3.3-12 V and 0.9-5 V, respectively. Synchronous rectifiers operate at 400 kHz switching frequency and can be synchronized to external clock. Series has multilayer PCB construction,...

Voltage References suit battery-powered devices.

Low-dropout Series REF31xx provides 1.25, 2.048, 2.5, 3.0, 3.3, and 4.096 V output voltages with 15 ppm/Ã-

Negative Voltage LDOs suit 200 mA applications.

Available in 5-pin, SOT-23 package, TPS723xx low-dropout linear regulators (LDOs) incorporate ceramic capacitors and offer thermal shutdown and over-current protection. With 65 dB @ 1 kHz power supply rejection ratio and 60 Ã-µV(RMS) output noise, they support battery-powered applications as well as applications with noise-sensitive circuitry. Products have operating voltages from -10 to -2.7...

More performance and functionality for Sinumerik 828D CNC

Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.