LED Light Source Drivers can be used in damp locations.
Available with 120 and 230 V input voltages, signPRO(TM) damp location-rated drivers are designed for Luxeon(TM)-branded LEDs. Sign drivers, offered in 350 and 700 mA models, are suited for use in sign settings where moisture could be of concern. Compact products deliver constant current operation, eliminating need for current-limiting resistors. Leaded design, with UL Class 2 rating, includes...
Read More »Diode Array offers bi-directional ESD protection.
Rated for operating voltage of 15 V, Model GCDA15C-1 offers typical capacitance of 5 pF, max reverse leakage current of 100 Ã-µA, and max clamping voltage of 21 V. ESD protection meets IEC 61000-4-2 Level 4 specifications. Measuring 1.25 x 2.85 mm with 1.1 mm profile, device comes in SOT-143 SMD package. High-temperature soldering is guaranteed to 260Ã-
Read More »IR Emitters are optimized with 850 nm wavelength.
Lead-free infrared (IR) emitters TSHG6200 and TSMG3700, suited for CMOS camera and high-speed IR data transmission applications, incorporate GaAlAs double hetero technology and have 20 ns rise time and 1.8 V max forward voltage. Model TSHG6200 has radiant intensity of 180 mW/sr at forward current of 100 mA and Ã-
Read More »LED Light Source cures adhesives in seconds.
Able to cure various UV- and visible light-cure adhesives in seconds, hand-held LoctiteÃ-® 7700(TM) offers typical output of 500 mW/cmÃ-² at wavelength of 405 nm. Portable curing system measures 9 x 1 x Ã-¾ in. and weighs less than 0.5 lb. Suited for applications in crowded or hard-to-reach areas, unit may be powered via rechargeable batteries or ac adapter. LED technology allows...
Read More »No Pencils Required: From Thinking to Knowing Through Mobility
This ebook provides a detailed guide on how mobility and digital data management systems (DDMS) can increase your company's overall effectiveness and efficiency.
Read More »Wedge-Based LEDs have 180-
Designed to replace T-1 Ã-¾ wedge-based incandescent bulbs, WB5 Series LEDs feature flat-faced lens design with internal reflector for light intensity. Subminiature products, rated 2.5-48 Vdc, measure 0.80 in. long and 0.230 in. in diameter. With service life rated at up to 100,000 hr, LEDs require typical operating current from 10-30 mA and come in 10 standard colors. Custom colors and...
Read More »High-Current Schottky Rectifier reduces power loss.
Housed in TO-220AB package, MBR60100CT consists of dual high-voltage, high-current Schottky rectifier that combines 100 V reverse voltage and 60 A forward current capabilities. Optimized for 100-300 W power supply applications, product features typ forward voltage of 0.64 V, max reverse leakage current of 20 mA, and typ leakage current of 8.5 mA. Other specifications include forward surge current...
Read More »LED Indicators allow lamp changes after installation.
Series SSF-LXH4RA right-angle LED indicators mount to printed circuit board without additional spacers or mounting hardware. Construction enables any 2-leaded LED to be installed before or after sockets have been soldered to board, which also allows users to change color or brightness. Products are available in 9 standard units in red, green, yellow, bi-color red/green, and blinking red versions....
Read More »Surface Mount LEDs include built-in reflector.
Suited for light guide applications, Series LS1 Side View, Right Angle LEDs come in 4.0 x 4.0 mm package with 2.4 mm diameter lens. Integrated reflector offers viewing area of 120Ã-
Read More »LED Panel Indicator can be seen from up to 100 ft.
Measuring 0.79 in. dia, Model SSI-LXH20R6 features LED with 6 chips, molded into single housing with hemispherical lens and 120Ã-
Read More »Flashlight incorporates three 1 W LEDs.
FlashLED FLT-5001 emits 1,800 foot-candles of white light through three 1 W, Luxeon(TM) solid-state LEDs. Each LED features onboard collimator that focuses light into tight beam with intensity rating of 75 lumens. Integrated flashlight head, comprised of LED lamps, lenses, and reflectors, optimizes light color, intensity, and dispersion. Measuring 12.31 in. long, unit operates for nearly 17 days...
Read More »Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics
Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.
Read More »