
Ion Pumps are offered in 19 standard models.
Available in tall and low profile versions, LION(TM) Series Ion Pumps are available with pumping ranges from 3-800 L/s. Standard diode and noble diode elements are complemented by Noble 30 option, which combines diode pumping element with noble gas capabilities. Three controllers are offered with RS232 as standard I/O, and provide ability to control up to 4 pumps simultaneously.
Read More »
Peristaltic Pump offers pressure capabilities to 100 psi.
Offering flows of 55 gph at 30 psi to 7 gph at 100 psi, Model 520RE can be utilized in applications requiring accurate metering, dosing, and transferring of harsh chemicals and caustic slurries. LoadSure(TM) elements guarantee correct loading every time, as well as 1-min maintenance with no snaking, twisting, or pinching. Self-priming pumps contain fluids within tube at all times, provide 99.5%...
Read More »Axial Piston Pumps feature max pressure of 3,500 psi.
Available in 3 frame sizes with 7 capacity ranges, open-loop Series PVWW is specifically designed for applications that involve low viscosity or high water content fluids. Pumps can also operate with standard petroleum or petroleum-based fluids. Units provide resistance to contamination through hardened cylinder surface running on hardened valve plate. With operation up to 1,800 rpm, pumps offer...
Read More »Electric Dispense System handles bulk oil.
Powered from 110 Vac outlet, Hurricane(TM) pumps synthetic or petroleum oils, ATF, and antifreeze (up to 50/50 mix) without requiring any wiring or plumbing. Complete system features electric pump, digital dispense meter, hose, and quick-change bung adapter. Able to fit any container up to 44 in. tall with 2 in. NPT opening, dispensing tool offers flow rate to 1.50 gpm and weighs under 20 lb....
Read More »
Ten Important Questions to Ask Before Selecting a Sign Company
This white paper outlines 10 questions that should be asked when selecting a sign company, eliminating some of the guesswork from making the best choice for your branding and signage needs.
Read More »
Roller Pumps come with side or rear port configurations.
Featuring 6 rollers for smooth performance and rotors made of corrosion-resistant alloy, Series 6600/6601 Roller Pumps offer output to 19.6 gpm at 1,000 rpm. They are constructed with 5/8 in. 416 stainless steel shaft and available with cast iron, Ni-Resist, or Diamond(TM) alloy bodies. Pump shaft rotation is counter-clockwise, with clockwise available. Able to withstand temperatures to 140-
Read More »
Metering Pumps provide dosing to 2,220 gph.
Positive displacement Series D35 handles range of media from ultra pure fluids to corrosives and slurries at pressures up to 1,200 psi. Units incorporate 5 Hydra-Cells into pentaplex design, enabling pulse-free flow under demanding conditions. Featuring tapered roller bearings and seal-less design, self-priming pumps run dry without damage and provide quiet operation. Optional oil level monitor...
Read More »
Turbo Pumps handle heavy particulate loads.
Turbo Pumps feature combination of pumping speeds from 1,200-2,100 l/s and throughput up to 2 slpm. Rotor/bearing design ensures MTBF better than 200,000 hours. Suited for harsh duty applications, pumps are designed to operate safely even after sudden stops. All utilize integrated controller with interchangeable peripherals and cables, and are available with IP54-rated integrated power supplies...
Read More »
Filtration System filters process fluid within tank.
In-Tank Filtration System comes with 50 micron filter cartridge made of corrosion-resistant CPVC with FPM seals for chemical resistance. Single and double filter cartridge models are available, both with choice of WEBSTER(TM) brand Series D or S pumps, which are seal-less and can be run dry. Replacement cartridges are available in 1, 5, 10, 30, 75, and 100 micron ratings with 1 in. ID and 12-½...
Read More »Positive Displacement Pumps handle aggessive applications.
Universal Design PD Pump Series includes stainless steel models in 10, 15, and 20 gpm configurations. Utilizing gear within gear pumping principle, units have 2 moving parts; stainless steel outer gear and plastic inner gear engineered to match application. Self-priming pumps feature inlet capacity of 20 in. Hg to 250 psi and viscosity range from 32-10,000 SSU. All units accept relief valves, lip...
Read More »Vacuum Pumps tolerate moderately aggressive media.
Double-diaphragm Series 2207 features oil-less design with permanently lubricated bearings and stainless steel valves. Aluminum components are dichromate conversion treated. Permanent split capacitor motors are available for worldwide power sources. With flows up to 2.57 cfm and maximum rated vacuum of 21 in. hg, smooth operating pumps are suited for vacuum hold-down devices, sawdust extraction,...
Read More »
Error Proofing by Design
Sturtevant Richmont's torque tools help customers cut rework and warranty costs while increasing throughput.
Read More »