New Pumps Products

Venturi Vacuum Pumps integrate into end-of-arm tooling.

Anver JV Mini-Vacuum Pumps, powered by compressed air, achieve 26 in. Hg vacuum with 0.50 or 0.74 scfm flow rate. Weighing 16 g, 1Ã-¾ in. long products are capable of millisecond attach-and-release and can be mounted directly at pickup point. Pumps, equipped with optional air supply control valve, can be transformed into compact vacuum systems with built-in 24 Vdc controls. Molded from...

Pressure Cup delivers consistent finishing results.

Available in 3 model options to suit non-agitated, rotary agitated, and oscillating agitated applications, 2-quart SG-2 Plus(TM) delivers continuous mixing capabilities. Four-screw lid design facilitates hose attachment, while divorced design of regulator and handle aids in maintenance. Dual-regulation is provided for rotary agitation models, and all models incorporate check valve that prevents...

Micro Pump offers high back pressure and suction height.

Measuring 1 in. in diameter and 1/5 in. in height, Model MDP2205 features max back pressure of more than 8 psi, which is matched by suction height of 5 ft. Flow rates range from 9 mm/min for water to 12 mm/min for methanol. Made of injection molded plastic components, self-priming diaphragm pump moves liquids and gases and may be adapted to customer needs. Applications include diagnostics,...

Syringe Pump features self-contained, programmable design.

With Program and Auto Fill buttons, PHD 22/2000 Pumping Module can be programmed with sequence of pumping steps. Users can start or stop pump, change pumping direction, change flow rate, pump precise volume and stop, pause pump, and ramp up or ramp down flow rate. RS232 ports are provided for input from computer and output when daisy chaining more than one pump together. I/O port consists of...

Bulk Briner 101: What You Need to Know When Considering a Bulk Briner

If you're thinking about switching from packaged to bulk salt, check out this white paper and see if a bulk briner is right for your application.

Pumps feature minimal-maintenance design.

Featuring ISO mount air valve for optimal compatibility, Mastercraft Drum and Pail Supply Pumps have modular construction for interchangeability as well as hardened and ground components for minimized maintenance. Features include 6 in. pump stroke, full flow intake, and oversized elevator piston rods that eliminate binding. Able to handle fluid pressures to 6,000 psi, pumps are suited for...

Peristaltic Pumps suit industrial processing applications.

With flow rates up to 4.8 gpm and pressure up to 60 psi, Series 620 is designed for metering and dosing of corrosive, abrasive, and sensitive fluids, and is suited for contamination-free transfer of acids, paints, oils, inks, dyes, or waste slurries. With no valves or seals to clog, pumps require minimal maintenance. Series 620 provides control ratio of 2,650:1 and includes PIN-secure process...

Industrial Pumps use Diaphragm Position Control technology.

Featuring dry running capabilities, self-priming D/G/M03 Kel-Cell series utilizes DPC technology to control position of Buna-n or VitonÃ-® diaphragm and provide diaphragm rupture protection under adverse inlet conditions. Industrial pumps can be close-coupled to NEMA 56c faced or metric motors as well as belt-driven. They provide max capacity of 3.0 gpm @ 1,750 rpm, max inlet pressure of 250...

Dry Pumping Station offers pumping speed of 60 l/s.

Available with 63 CF or 63 ISO flange sizes, plug-and-play E-Station includes turbo and dry diaphragm pump with ultimate pressure of 10-8. DCU allows control and diagnostics. Bench-top station is suited for research and development as well as vacuum applications that require hydrocarbon-free vacuum.

Micro Diaphragm Pumps handle most gases from 5-50-

Measuring .80 x 1.74 x 1.27 in., single-head Series CTS delivers up to 2.5 lpm unrestricted flow, pressure to 24 psig, and vacuum service to 20 in. Hg. Units are available with brushless dc motor, brush motor, or coreless motor, and all configurations are offered in 6, 9, or 12 Vdc versions. Operating current varies from 50-500 mA, depending on motor type, voltage, flow, and pressure...

Dispenser offers manual and semi-automatic work modes.

Electromechanically operated LoctiteÃ-® Benchtop Peristaltic Dispenser uses pressure from mechanical rotor to move single-component adhesives or solvents with viscosities up to 5,000 cPs. Able to transfer adhesives directly from bottle to handheld dispense valve, volumetric dispense system suits applications that require dot to dot or continuous bead repeatability. System uses air-free...

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.