Linde to Highlight New LNG Fueling Station Design at World LNG Fuels Conference (998128)

Murray Hill and New Providence, New Jersey, U.S. – Linde LLC will announce the start-up of its new LNG fueling station in Springville, Indiana, at the World LNG Fuels Conference 2014 at the George R. Brown Conference Center in Houston, Texas, January 21-23. The new station, the first of its kind in the U.S., incorporates the latest technology and design similar to the Linde stations operating...

Read More »

Leading Manufacturer Begins Rollout of Pumped Up New Product Line

New Pumps Achieve Industry-Leading Efficiency, Reducing Operating Costs for Customers MENTOR, Ohio — All-Flo Pump Company is launching a new line of air operated diaphragm pumps that will raise the bar on efficiency standards across the industry. The new line of innovative, stainless steel and aluminum pumps rolled out in December. For use in a wide variety of chemical and fluid transfer...

Read More »
Eccentric Disc Pumps target oil and gas industry.

Eccentric Disc Pumps target oil and gas industry.

Available in ductile iron construction, A Series features max speeds to 600 rpm, max flow rates to 242 gpm, and suction/discharge ports from 1-½–4 in. Maximum differential pressure of 145 psi enables pumps to be used in safe transfer of viscous, non-lubricating, volatile, or delicate fluids up to 176°F in variety of oil and gas applications. In addition to self-priming and run-dry...

Read More »
Water for Algeria

Water for Algeria

Middle of this year, Belgian subsidiary KSB Belgium SA/NV received an order for equipping a new pumping station for the Athmania project with ten large water pumps. The pumps type RDLO 700-980 A are to be driven by a 1,810-kW electric motor each. Running at full load, each of the ten pump sets will be delivering 2,025 litres of water per second at a head of 75 metres. To rule out the risk of...

Read More »
Axial Piston Pump offers serial gearbox protection.

Axial Piston Pump offers serial gearbox protection.

Featuring displacement up to 130 cm-³/rev and peak pressures to 450 bar, Model V60N-130 is flanged directly to power take-off of vehicle's gearbox, offering- standard torque limitation. Alternatively, with SAE- and ISO-standardized flanges, pump can be connected to separate transmissions. Measuring 130 mm wide- with 2-part casing that is protected against deformation, pump is suited for...

Read More »
NETZSCH TORNADO® T2 Rotary Lobe Pump Wins Processing Magazine 2013 Break-Through Product of the Year Award at the 2013 Chem Show in New York

NETZSCH TORNADO® T2 Rotary Lobe Pump Wins Processing Magazine 2013 Break-Through Product of the Year Award at the 2013 Chem Show in New York

Exton, PA — Processing Magazine's Breakthrough Products of the Year awards recognize products, technologies and services that made significant contributions in the process industries within the last year, and are expected to impact the industry for years to come. The TORNADO® T2 was recognized for materials advances applied to rotary lobe pumps. It addresses conveyance challenges by completely...

Read More »
RectorSeal Debuts HVAC Industry's First Web-Based Condensate Pump Selection Tool for Ductless Mini-Split A/C

RectorSeal Debuts HVAC Industry's First Web-Based Condensate Pump Selection Tool for Ductless Mini-Split A/C

FastFind Pump Selector navigates through all major ductless mini-split brands/models for the U.S. market; selects most ideal Aspen pump along with installation and wiring info. RectorSeal® Corp., Houston,-  a leading manufacturer of quality HVAC/R products, debuts the RectorSeal FastFindtm Pump Selector, the HVAC industry's first and only interactive web-based ductless mini-split condensate...

Read More »

2013 PM Technology Review Article

2012/2013 Developments: PM part suppliers are not immune from the increasingly tight tolerances being demanded by customers.-  In the case of precision ground PM parts, such as variable valve timing (VVT) components and gerotors, deburring/edge break specifications are also tightening.-  Because these parts are often ground to tolerances of a few microns, the added challenge is removing the...

Read More »
New Products and Services to Save Money in Finishing

New Products and Services to Save Money in Finishing

Vibrafinish now provides relining of vibratory and high energy equipment. Relining your current equipment will save on the expense of new equipment.- Also, Compound-  Metering System and Filtration Systems are available to ensure accurate compound flow and easy manageable wastewater treatment at a reasonable price. Vibra Finish Company 8411 Seward Rd. Hamilton, OH, 45011 USA Vibra Finish is Now...

Read More »
EODD Pump offers alternative to air operated units.

EODD Pump offers alternative to air operated units.

Powered by -¾ hp motor, Model 25200 Electric Operated Double Diaphragm Pump should be considered for applications that require pump with suction lift in excess of 20-° hg, pumping liquids with large suspended solids, and transferring liquids with non-shearing, low emulsifying action. Unit- can- run dry, self-prime from dry starts, and provide variable flow rates.- Applications include...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics