Prototyping Systems

Development Kit works with high-voltage DACs.

Development Kit works with high-voltage DACs.

HVDAC DevKit, model UVK-HVDAC200-4, provides plug-and-play platform for evaluation and prototype development using HVDAC200-4 quad, 9-bit, serially configurable voltage/current DAC with outputs of up to 200 V. Kit comes with WindowsÂ-®-based demo program and consists of Goal VERSA MIX 8051 MCU, onboard voltage reference, and 2 adjustment potentiometers. Kit also offers over-temperature and...

Read More »

Robotic Software simplifies milling of prototypes.

CAMRob CAM Interface software, combined with 6-axis robot and high-speed spindle, facilitates milling of complex prototypes and eliminates pendant-based programming. Users can mill up to 5 sides of work pieces in one setup, and APT or G-code files can be downloaded, converted to KUKA's robot programming language (KRL), and executed. Controlled from PC based platform, robots offer payload...

Read More »
Rapid Prototyping System suits in-office applications.

Rapid Prototyping System suits in-office applications.

Eden260(TM) photopolymer jetting system fully cures modeling material with UV light during modeling process. Offering resolution of 16 microns, models do not need curing after being built, nor do they require other steps beyond support removal. PolyJet modeling resin comes in sealed cartridges that are safe and clean, so users are not exposed to liquid resin. Operating on 120 Vac, 60Hz, Eden260...

Read More »

DSP Co-Processing Kit includes Cyclone II FPGA.

DSP Development Kit, Cyclone(TM) II Edition, allows users to design, prototype, and debug digital signal processing (DSP) co-processing applications for various applications. It includes Cyclone II FPGAs, Texas Instruments' (TI) ADS5500 ADCs, and interface to TI's DSP starter kits. Platform also supplies users with development board, Mathworks' Simulink software, DSP Builder, and QuartusÂ-®...

Read More »

Prototyping System mills various non-proprietary materials.

Desktop Subtractive Rapid Prototyping System, Model MDX-40 mills ABS, Delrin, nylon, and tooling board. With 12 x 12 x 4.12 work volume, system includes 4th rotary axis for unattended 2- and 4-sided milling, 15,000 rpm spindle for creating detailed features with fine tools, and emergency stop switch for safe work environment. MODELA Player 4 CAM software generates proportional 3D scaling,...

Read More »
Stereolithography Material offers high stiffness.

Stereolithography Material offers high stiffness.

Incorporating non-crystalline, nano-particle technology, NanoForm(TM) 15120 offers heat deflection temperatures of more than 500-°F. It is processed in identical manner to unreinforced liquid SL resins, requiring no mixing or other special handling. High temperature and hardness properties make resin useful for rapid prototyping applications.

Read More »
Rapid Prototyping Systems offer 5 and 7 mil settings.

Rapid Prototyping Systems offer 5 and 7 mil settings.

Built on T-Class platform, FDM Titan and FDM Vantage model high-performance thermoplastic. Former includes 5 mil or 0.005 in. resolution setting, available for use with ABS plastic modeling material, resulting in production of models with features as fine as 0.020 in. on functional prototype. FDM Titan and FDM Vantage machines also include 7 mil or 0.007 in. resolution setting for ABS modeling...

Read More »
Machine aids in prototype/testing applications.

Machine aids in prototype/testing applications.

Measuring 8 in. wide with dimensionally warranted precision modules in 18 in. increments, Agileslim PL is available in 3 configurations: carrousel, vertical, or over and under. It utilizes servo-controlled or cam controlled motion for intermittent or continuous movement. Unit can be expanded, contracted, or modified, and is available with 2 or 3 in. precision links. It serves as production...

Read More »
Prototyping System models polycarbonate material.

Prototyping System models polycarbonate material.

FDM Vantage(TM) comes in 3 variations. Vantage S offers higher speed than base model, depending on material type, layer thickness, model geometry, model size, and support style. In addition to speed increase, Vantage SE has expanded build envelope with 150% more volume for bigger prototypes. It also has expanded material bay with housings for second model-material canister and second...

Read More »
Polycarbonate Material suits rapid prototyping applications.

Polycarbonate Material suits rapid prototyping applications.

Type PC-ISO meets ISO 10993-1 and USP Class VI standards and is suited for food, pharmaceutical, and medical equipment modeling. It can be sterilized using gamma radiation or ethylene oxide method. Available in translucent and white, product is suited for T-Class rapid prototyping systems. Components built from translucent PC-ISO allow viewing of solid or liquid material flow. Model-layer...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics