Objet's Connex500(TM) - the First-Ever Multi-Material 3-D Printer - to Debut in the U.S. at SolidWorks World 2008
BILLERICA, Massachusetts, January 16 - Objet Geometries Ltd., the world leader in ultra-thin layer photopolymer jetting, today announced that the U.S. introduction of its Connex500(TM) 3-D Printing System and PolyJet Matrix(TM) Technology will take place at the SolidWorks World show in San Diego, CA. The revolutionary Connex500, which is the first system capable of printing parts and assemblies...
Read More »Rapid Prototyping System utilizes ABSplus material.
Featuring 8 x 8 x 12 in. envelope, FDM 200mc(TM) can build parts with 0.007 and 0.010 in. layers and uses soluble support technology for surface finish and detail. In simple mode, Insight(TM) software automatically manages production of parts, while in advanced mode, users can manipulate construction parameters to change mechanical properties of the part. This mode also allows users to pause...
Read More »Big Speed-Up for FDM Rapid Prototyping and Manufacturing: Stratasys Increases Throughput Up to 50 Percent
MINNEAPOLIS, April 19 -- (NASDAQ: SSYS) Stratasys today announced a new build option that increases throughput up to 50 percent compared with previously available options. The enhancement affects the FDM Titan and FDM Vantage systems using ABS plastic. The exact throughput improvement will depend on part geometry, and average speed improvement is 40 percent. The build option employs a new layer...
Read More »Development Platform handles dual processing systems.
Based on Virtex(TM)-4 FX60 FPGA, RoHS-compliant ML410 provides designers with logic fabric, 2 embedded PowerPC-® 405 processors, and high-speed serial I/O with integrated transceivers for rapid prototyping and verification of embedded system designs. ATX motherboard includes 256 MB DDR-II DIMM memory, 64 MB DDR component memory, PCI-® Express and PCI 32/33 expansion connectors, 2 10/100/1000...
Read More »
Super Precision Bearings for Machine Tools: Factors For A Successful Spindle Bearing Set Up
This white paper provides an in-depth overview into choosing the right bearing for machine tools.
Read More »
Composite Resin promotes optimal sidewall characteristics.
Filled with non-crystalline nanoparticles, NanoTool(TM) stereolithography (SL) resin accelerates processing of parts while minimizing finishing requirements. This ProtoComposite(TM) material has flexural modulus of 10,500 MPa, heat deflection temperature of 260-°C, and linear shrinkage under 0.001 in. Able to be used in applications involving metal plating, resin is formulated so that water...
Read More »Fujitsu, Advantest Establish 'e-Shuttle' JV for LSI Prototyping Services
Tokyo, Japan, Oct. 30, 2006 - Fujitsu Limited and Advantest Corporation today announced their agreement to establish on November 1 a new joint venture, e-Shuttle, Inc., to provide prototyping services for leading-edge large-scale integrated circuit (LSI) semiconductors. e-Shuttle will use electron beam direct lithography(1) technology that combines advanced semiconductor process technologies with...
Read More »
EOSINT P 700 LASER Sintering System in Use at Forecast Product Development
September 15, 2006 CARLSBAD, CALIF. - September 15, 2006 - Forecast Product Development, the leading provider of rapid prototyping and manufacturing for plastics and metals, today announced the certification for production use of the EOSINT P 700 laser sintering machine, the first dual laser system available for producing plastic parts. Alex Fima, president of Forecast, states, We chose the...
Read More »Rapid Prototyping System provides large-format design.
Measuring 19.7 x 15.7 x 7.9 in., PolyJet(TM) Eden500V permits construction of large models and also allows multiple models to be produced simultaneously in single run. Sealed liquid resin cartridges are inserted into machine, which jets out only amount needed to build model. While each model layer is built, it is simultaneously cured with UV light. Horizontal resolution setting of 30 microns and...
Read More »
Prototyping System creates custom packaging prototypes.
Packaging Prototyping System combines LPX-1000 3D laser scanner, MDX-40 3D milling machine, SOLJET(TM) PRO II V SC-545EX printer/cutter, and vacuum forming equipment. Offering resolution of 0.0039 in., Model LPX-1000 scans objects up to 5 in. dia x 8 in. high. Model MDX-40 features 15,000 rpm spindle and offers work volume of 12 x 12 x 4.12 in. Fourth rotary axis is provided for unattended 2- and...
Read More »
Photo-polymer Modeling Material has rubber-like properties.
Designed for Eden333 PolyJet(TM) rapid prototyping systems, FullCure(TM) Tango line provides flexible rubber-like 3D models early in design stage. Line includes TangoBlack(TM), with 61 Shore A hardness, and TangoGray(TM), with 75 Shore A hardness. Both products provide high elongation at break and can stretch to mate with other components. Tango products are suited for prototyping of products...
Read More »
DoorKing's 1601 Lane Barrier Provides a Higher Level of Traffic Control for Less
DoorKing is proud to introduce an easy add-on to its 1601 Barrier Gate Operator: The 1601 Traffic Lane Barrier. The barrier gate provides greater traffic control while eliminating the need for bollards or crash beams. Check out this video to learn more.
Read More »
