Network / Ethernet Switches

Switch/Converter features pushbutton on front panel.
Network / Ethernet Switches

Switch/Converter features pushbutton on front panel.

Facilitating access to any one of 8 separate fiber optic networks, QuickSwitch Model 4193 with pushbutton eliminates plugging and unplugging of fiber optic patchcords, minimizing connector wear. Internal circuitry ensures isolation between networks/devices, where as common port converts selected fiber optic network port to 100BaseTX interface. Eight network ports of switch are 1,300 nm 100 Mbps...

Read More »
Network Switch features board only design.
Network / Ethernet Switches

Network Switch features board only design.

With serial remote control port, PathwayÂ-® Model 7423 RJ45 Cat5 A/B/C/D Switch allows users to share single RJ45 interface device connected to common port among 4 other devices. Switch provides board mounted pushbutton control or remote control via ASCII RS-232 serial data sent through its remote port, allowing users to remotely monitor status, control switch functions, and lockout front...

Read More »
Network / Ethernet Switches

Unmanaged Gigabit Ethernet Switch offers 12 or 24 ports.

Designed to enable continuing growth in network communications traffic, NETernity(TM) CP981RC 6U Layer-2 Switch enables users to configure maximum number of communications ports within single or dual CompactPCI slot. Device features front I/O and supports 10BaseT, 100BaseTX, and 1000BaseT as well as 1000BaseSX and 1000LX interfaces. With hot-swap capability, switch is field replaceable while...

Read More »
BNC A/B Switch can be remotely controlled.
Network / Ethernet Switches

BNC A/B Switch can be remotely controlled.

Allowing access to 2 separate BNC ports via Common port, Model 7209 is controlled manually with front panel pushbutton or remotely using ASCII commands via RS-422 serial port. It maintains last set position on power loss and continues to pass data, while its rugged aluminum enclosure provides EMI/RFI shielding. Switch also features 3 isolated BNC port connectors on rear panel and switch ports are...

Read More »
A/B/Off-Line Switch employs mirror technology.
Network / Ethernet Switches

A/B/Off-Line Switch employs mirror technology.

QuickSwitchÂ-® Model 6259 16-Channel fiber optic ST Simplex A/B/off-line switch allows devices connected to Common port of each channel to access A or B port of each channel. Enclosed in standard 2U rackmount casing, unit goes off-line on power loss and stops passing data. It can be controlled locally by using front panel pushbuttons; there is no remote control for this unit. A, B, and Common...

Read More »
Secure Switching System is suited for video conference rooms.
Network / Ethernet Switches

Secure Switching System is suited for video conference rooms.

Rackmount Switching System facilitates passing connection of voice/data lines, both copper and fiber media, from designated set of equipment to existing building network, or disconnects them from building network, isolating all equipment in designated room or area. It comprises of Secure/NonSecure indicator unit, and data pass/off-line switches including fiber optic SC, 16-channel Ethernet,...

Read More »
A/B Switch allows sharing of DB25/X.21 BIS interface devices.
Network / Ethernet Switches

A/B Switch allows sharing of DB25/X.21 BIS interface devices.

Manually controlled by front panel pushbutton or remotely via DB9 connector accepting RS232 serial data, PathWayÂ-® Model 7231 enables sharing of DB25/X.21 BIS Interface device between 2 other X.21 devices. Two-position device allows user to issue remote ASCII commands to set pushbutton-position change delay value, which is amount of time operator must hold down pushbutton before acutal...

Read More »
Ethernet Switch provides real-time access to field level.
Network / Ethernet Switches

Ethernet Switch provides real-time access to field level.

Using technique based on switching technology that does not alter Ethernet message and complies with IEEE 802.3, Automation IT creates Ethernet communications platform for applications in convergent industrial network. High-priority automation messages generated by industrial automation profiles, which use standard Ethernet overtake messages that are not relevant to automation systems, ensure...

Read More »
Network / Ethernet Switches

Fast Ethernet Switches help SMBs expand networks.

Featuring 1U form factor, ProSafeÂ-® FSM Series Layer 2 Ethernet Switches offer ability to stack together, enabling SMBs to increase size of network as they grow. Models FSM7226RS and FSM7250RS are fully managed 24- and 48-port switches with auto-sensing 10/100 ports, 2 GigE ports, and static routing feature that ensures routing between VLANs and network segmentation. Model FSM726E is a...

Read More »
Network / Ethernet Switches

Ethernet Switches can transfer data at speed of 10/100 Mbps.

Available with both copper wire or fiber optic cable connections, iCON-32005, iCON-32008, and iCON-32160 can either be DIN-rail or panel mounted. iCON-32005 series have 5-port 10/100Base-TX or 4-port 10/100Base-TX plus 1-port 100Base-FX, where as iCON-32008 series is equipped with eight 10/100Base-TX ports, or six 10/100Base-TX ports plus two 10/100Base-FX ports. iCON-32160 series offers sixteen...

Read More »

All Topics