New Motor Controllers and Drives Products

Compact Driver targets microstepping applications.

Measuring 2.95 x 4.96 x 1.26 in. and requiring up to 4 A per phase and 40 Vdc, driver is suited for 2-phase bipolar steppers. Driver, designed for NEMA 14-34 steppers, has dip switch settings to provide microsteps of 2, 5, 10, 16, 20, 32, 40, and 64 steps-per-step. Idle current is 50% of running current and activated 0.5 sec after last pulse. Applications include pick-and-place, medical testing...

AC Drives feature bypass and electronic control.

Designed for HVAC building automation applications that require redundancy, E7L drive employs 2-contactor bypass to allow motor operation from drive or across ac line. It features electronic touchpad control, PI controller, and embedded communications. AC Drive adjusts output voltage to suit actual motor load. Version E7B provides 3-contactor bypass that uses additional contactor to isolate drive...

Arc-Resistant Controller suits medium-voltage environments.

CENTERLINE ArcShield controller provides Type 2 arc-resistant protection for safety of personnel working in environments that require voltages from 2,300-7,200 V. Products are available in 18 in. incoming units and 400 A, one-high full-voltage non-reversing (FVNR) controllers. Safety features include arc vents on roof, sealed low-voltage panel, cabinet with 12-gauge steel sheets, and isolated...

Pulse Drive System suits HVAC applications.

Ranging from 25-500 hp, Model E7 18-Pulse Drive limits THD at drive input terminals to less than 8% current distortion and less than 3% voltage distortion. It includes LCD keypad, PI controller, sleep function, and under-torque detection system. Communications for Johnson Controls MetasysÃ-® N2, Siemens Apogee(TM) FLN, and Modbus are embedded. DriveWizard(TM) software lets user manage drive...

Why Clean Rooms Matter For Your Glass Parts

Clean rooms reduce the risk of contamination from a variety of contaminants that can compromise a critical manufacturing process or fabricated part.

Microstepping Driver includes onboard indexer.

Model R325 is capable of ouptut currents from 0.25-3.0 A peak while handling +12-48 Vdc input voltage. Selectable step resolutions include Full, 2, 4, 8, 16, 32, 64, 128, and 256x. In addition to hold current reduction capabilities with adjustable current and timeout settings, unit includes 3 optically isolated inputs and one optically isolated control output that can be used for step, direction,...

Microstepping Driver includes onboard indexer.

Capable of output currents from 0.25-3.0 A while handling 12-48 Vdc input voltage, Model R325 offers selectable step resolutions of full, 2x, 4x, 8x, 16x, 32x, 64x, 128x, and 256x. It includes hold current reduction capability with adjustable current and timeout settings. Three optically isolated inputs and 1 optically isolated control output can be used for step, direction, disable/enable, and...

Motor Speed Control is fully potted for harsh environments.

Operating from 10-20 Vdc, Model MMP25A-12V features INTERNAL 3300 micro farad electrolytic filter capacitor for ac ripple control. Solid state PWM, unidirectional unit is suited for any battery-powered or other dc power sourced applications that require adjustable speed of dc motor or gear motor. Able to deliver 25 A at nominal 12 Vdc, fully encapsulated control provides up to 500 W of output and...

Servo Drive can operate on 20-100 Vdc.

Measuring 6.5 x 1.4 x 1.4 in., Model MMP-M1525-BR-24V features adjustable peak and continuous current limiting, current monitoring, limit switch inputs, and inhibit input. It also offers fault output, tachometer scaling, and LED display diagnostics. PWM Servo amplifier has continuous output current capacity of 15 A, 25 A peak, while brushed motor amplifier accepts typ input command signal of Ã-

Integrated Stepper Module controls up to 5 stepper motors.

Five Axis Integrated Stepper Module runs on distributed block I/O network, and consumes 3 of 77 available block I/O slots in control system. It includes stepper translator so output is connected directly to stepper motor eliminating need for stepper drive. Five channels of SSI encoder feedback are available for position verification of each stepper motor being controlled. Stepper motion profiles...

Compact AC Drives sustain 150% overload for 5 minutes.

SECO-branded Bronco VFD Series Variable Frequency AC Drives feature isolated front end and voltage doubler circuit that can output 230 Vac to motor from 115 Vac power supply. Available for up to 1.5 hp operation, dual-voltage inverters also accept speed reference signal without separate isolation card. Products come in 3 styles: chassis, NEMA 4 cast aluminum, and NEMA 4x USDA rated white epoxy...

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.