Modules

I/O Module handles communications to high-power components.

I/O Module handles communications to high-power components.

Model CL-408 enables joysticks and other control devices to interface with machine bi-directional servos, valves, and solenoids. Unit can stand-alone or be configured as slave module in CAN system. It provides three 0-5 Vdc, 12-bit analog inputs; 1 frequency or Switch to Ground input; four 15 A, bi-directional servo outputs; three 15 A sourcing outputs; and one 50 mA, 5 Vdc regulated supply....

Read More »
Loop Back Module is suited for high-speed systems.

Loop Back Module is suited for high-speed systems.

Suited for testing systems operating at 500 Mbps to 3.2 Gbps per channel, FCN-261Z00x matched-impedance loop-back module uses internal matched-impedance PCB to perform signal testing. Design offers crosstalk of less than 4% and in pair skew of less than 5 ps to maintain integrity of signal being tested. Unit has die-cast metal housing and latching mechanism. Overall, 12x device measures 48.9 x...

Read More »
Switching Power Modules reduce standby power consumption.

Switching Power Modules reduce standby power consumption.

Series BPS100 and BPS200 modules provide 1 and 2 W of standby power, respectively, to household appliances and consumer electronics. Utilizing technology that eliminates line conducted EMI, board mountable modules can be used in PCBs on standard pin grid arrays. These UL, CSA, and TUV approved products incorporate custom integrated circuits within packages ranging from 0.6-1 inÂ-³. Nominal...

Read More »
I/O Module features optical and relay isolation.

I/O Module features optical and relay isolation.

Model JSB-340 provides four 2 A form C relays and 4 opto-isolated inputs that plug and play into standard USB. Inputs provide up to 2,500 V electrical isolation and selectable input range of 0-15 or 0-30 V. User can control relays and sample input from any programming or test language that supports USB communications. Optical and relay isolation eliminates surges from effecting host PC in test,...

Read More »
Power Entry Modules have current ratings from 1-10 A/250 V.

Power Entry Modules have current ratings from 1-10 A/250 V.

Series DC11 and DC12 combine AC inlet, with optional EMC filter, and rocker style switch recessed in unit to prevent accidental actuation. In-rush rating is 100 A for 3-4 msec, 5 A continuous, and lifetime is rated for 50,000 cycles at 10 A/250 V. Offered for 1- or 2-pole switching, unlighted or lighted units snap-in or screw-on for mounting. Low band pass filter is optimized to attenuate noise...

Read More »
Thermocouple Input Module has 56 channels.

Thermocouple Input Module has 56 channels.

DBK90(TM) high-density thermocouple (TC) input module, suited for use with DaqBook/2000Â-® and WaveBook/516E(TM) series Ethernet-based data acquisition products, enables up to 896 thermocouples to be attached to one A/D mainframe. Any combination of TC types can be attached to any channel via mini-TC input connectors. Each bank of 14 TC inputs has separate cold-junction sensors, and time...

Read More »

Interface integrates SAP and MES software.

SAP interface, using Factelligence(TM) Supply Chain Connector module, is user-configurable and exchanges vital production information between factory personnel and ERP. It downloads work orders, materials, bill of material definitions, and user information from SAP into Factelligence. Interface also manages uploading of material consumption, product movements, and labor usage from MES database...

Read More »
I/O Module reduces panel space requirements.

I/O Module reduces panel space requirements.

SixTRAKÂ-® Model ST-DI-024-32D double-density, 32-channel, discreet input module can be DIN rail or direct panel mounted and has hot-swap capability. It provides local I/O expansion for controllers, remote terminal units, or I/O gateways. All module inputs return to common ground and isolation protects system from wiring faults. Module is vibration-resistant, operates in temperatures from -40...

Read More »
PC/104 Module offers digital and analog I/O.

PC/104 Module offers digital and analog I/O.

Designed with Maxim MAX197 successive approximation-type A/D chip, AIO-104+8 provides 8 single-ended, 12-bit inputs. Unit also includes two 12-bit D/A output channels and 16 TTL digital I/O bits, which can be individually programmed as input or output. Suited for PC/104-based data acquisition/control and test/measurement applications, unit's A/D inputs are software selectable for 0-5, 0-10, Â-

Read More »
Signal Sources reduce baseband design iterations.

Signal Sources reduce baseband design iterations.

Baseband Studio N5115A provides digitally integrated single- and dual-channel fading simulation of baseband signals generated by ESG. Model N5110A allows long waveform files residing on PC hard drive to be streamed to ESG or PSG vector signal generator. Model N5101A PCI card enables fading and waveform streaming software applications. Model N5102A digital signal interface module allows ESG and...

Read More »

All Topics