Modules

Damper Drive Module suits industrial applications.

Damper Drive Module suits industrial applications.

Module, compatible with all damper types, includes integral manual override and modulating or on/off control with failure mode options. Suitable for new installations or replacing existing electric/pneumatic drives, unit provides accurate air/gas flow control to burners, heaters, boilers, and turbine systems in power plants, refineries, and additional industrial applications.

Read More »

Interface Modules integrate HART data from field devices.

Fully redundant modules for CENTUM CS3000 R3 distributed control system, enable users to install HART-capable I/O into remotely mounted units within Class 1 Division 2 environments. Options include ISA G3 corrosion resistance and high temperature rating of -20 to +70Â-

Read More »
Monochrome Display Modules provide high contrast ratio.

Monochrome Display Modules provide high contrast ratio.

Series C-51505 20 character x 2 line displays employ negative mode panels with company's High Performance Color technology, contrast ratio up to 80:1, and 15 mA operating current. Backward-compatible to existing industry standard displays, they use flat, LC (liquid crystal) fluid to support 5V operation over -20 to +70Â-

Read More »
Hardened I/O offers point-level diagnostics.

Hardened I/O offers point-level diagnostics.

ArmorBlock MaXum(TM) I/O blocks provide device-specific analysis of faults and advanced warning of off-wire and short-circuit detection. These 16-input DC and 8-input/8-output 24 VDC, 1792D modules are software selectable via EDS parameters in RSNetWorx(TM) for DeviceNet(TM). Able to handle sinking or sourcing inputs, they include input circuitry that eliminates false inputs generated by sensors...

Read More »
Understanding Water Hammer
Sponsored

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Read More »
Single-Channel Interface has ultra-low profile.

Single-Channel Interface has ultra-low profile.

Model GB4xxx-LP single-port Gigabit Ethernet magnetics module measures 2.5 mm thick and suits 10/100/1000 Gigabit applications. Surface-mount module helps provide single port IEEE802.3 compliant transformer/choke for Gigabit Ethernet applications. Package includes 4 isolation transformers, 4 common mode chokes, and option for 4 Auto Transformers. Unit is suitable for use in laptop computers,...

Read More »

I/O Module facilitates in-circuit testing.

Digital GC5930 Programmable Levels I/O Module provides 32 channels of programmable level translation outputs combined with programmable level threshold inputs. It eliminates need to create external custom interface circuits. Output level can be programmed between 0.3 and 9 V. Maximum current per pin is 100 mA and maximum current for any group of 8 pins is 160 mA. Operating frequency is 0-50 MHz....

Read More »
MIL-STD-1553 Terminal is offered in various configurations.

MIL-STD-1553 Terminal is offered in various configurations.

Mini-ACE Mark3, 3.3 V, fully integrated, MIL-STD-1553 BC/RT/MT terminal uses 0.77 in.Â-² board space and measures 0.13 in. high. It is offered with RT-only or BC/RT/MT functionality, 4K x 16 or 64K x 17-memory compliment, and either PCI or generic processor backend interface. Mini-ACE Mark3 works with 8, 16, or 32-bit processors with little or no glue logic while PCI Mini-ACE Mark3 series...

Read More »
I/O Modules can be configured as Modbus or ASCII slaves.

I/O Modules can be configured as Modbus or ASCII slaves.

I/O Pak(TM) K-Series Modules are 1,000 Hz, 19-bit analog measurement devices. Three types are offered with 1 to 32 channel configurations. All models operate on 10 to 30 Vdc and transmit information over RS-485 interface. I/O configuration files may be stored (on PC), retrieved and downloaded. Linearized, scaled, and formatted data is transmitted to host or network master using standard...

Read More »
Central Control Module handles heavy-equipment functions.

Central Control Module handles heavy-equipment functions.

Model CL-100 HED Central Control Module, for CANLink(TM) family of control components, is placed along CAN systems for trafficking communications to areas that must be isolated. It includes 32-bit microprocessor and RS232 connection. Incorporated J1708 port enables CL-100 to talk to other parts of machinery that operate on that protocol. Field-rugged, CL-100 is not affected by EMI/RFI, extreme...

Read More »
I/O Module features IP67 rating and enhanced diagnostics.

I/O Module features IP67 rating and enhanced diagnostics.

FieldLine I/O fixture-mounted I/O module is offered with 8 digital inputs, 8 digital outputs/2 A capacity, or 4 digital inputs/4 digital outputs/2 A capacity. It offers detachable mounting subplate and horizontal/vertical DIN rail mounting. Fieldbus connections support Profibus, Interbus, and DeviceNet networks. Diagnostic capabilities include monitoring of low sensor supply voltage, sensor...

Read More »

All Topics