New Modules Products

I/O Module and Cable connect to Gigabit Ethernet networks.

BladeCenter(TM) Copper Pass-Thru Module provides unconfigured network connection that enables blade servers in BladeCenter unit to connect to existing Gigabit Ethernet network infrastructure. Unit requires no configuration, conforms to mechanical and electrical requirements for BladeCenter, and provides self test and diagnostics capability. It allows up to 14 blade connections per module and up...

Wireless Data Transmission System suits Division 2 areas.

Model N4ANT-D2 Explosionproof Class I, Division 2 I/O data transmission system exports data without hard wiring or conduit. It enables activities such as data collection, sensor monitoring, and process control. System, enclosed in ruggedized cast aluminum enclosure, has 600-1,000 ft range, stainless steel hardware, and 1 W transmitter power. It utilizes Frequency Hopping Spread Spectrum...

Control/Interface Module offers integrated motion.

ControlLogix/SERCOS 1756-L60M03SE Module combines ControlLogix 1756-L6x controller with SERCOS interface motion module, providing up to 6 axes of control. It uses RSLogix 5000 v.13 programming software with 38 motion instructions for configuration. Module supports ladder, function block, sequential function chart, and structured text programming languages. CompactFlash memory provides removable...

Power Entry Module offers low-profile design.

Designed to save space and minimize time during assembly of electronic devices, pcb-mounted Series DC21 prewires switch and inlet for 3-pin (L, N, and E) installation. AC inlet and on/off switch functions are internally wired, and rear cover further insulates module from other components. Available in 1- or 2-poles with lighted option, rocker-style switch is recessed to avoid accidental...

5 Key Questions to Ask Before Choosing a Custom Welding Company

This white paper provides an in-depth overview into choosing a custom welding company by highlighting five questions you should ask a potential welding partner to determine whether they are right for your custom welding project.

Digital I/O Card combines optoisolation and high voltage.

PCI-bus card, Model PD2-DIO-128i supplies 64 digital inputs and 64 digital outputs, each line with its own optoisolator. I/Os are configured in fixed banks of 16 lines. Each line runs at 10 kHz max and works from external supply voltage of 12-32 V. Outputs generate 500 mA/channel peak and 200 mA/channel continuous with max of 1 A/port. Operating on 3.3 or 5 V PCI-bus backplanes, board includes 33...

Cabinet delivers modular I/O expansion.

Rack-mountable IBM 7311 Model D11 I/O Drawer, designed to attach to IBM eServerÃ-® p5 570 system, is suited for users who need more than 24 I/O slots. Each drawer provides six 64 bit, 3.3 V, hot-plug PCI-X slots, and up to 20 units are supported by model 570 with connections via remote I/O adapters and cables. Product requires 4U of vertical space in 19 in. rack and holds one or two D10 or...

Bridge Module adds wireless connectivity to serial devices.

Airborne(TM) Serial Bridge Module provides RS-232 interface and specific command set for OEMs looking to add wireless 802.11 connectivity to products with built-in serial interfaces. Interface supports baud rates from 300-921.4 Kbps and is capable of both full or half duplex mode and hardware and software flow control. Built-in web server provides configuration of serial interface, baud rates,...

Appliance helps optimize IT asset utilization.

Able to instantly plug into IT infrastructure, nLayers InSight delivers agentless appliance that automatically uncovers ways to optimize applications and mitigate risks involved in making changes to production environment. It tracks application relationships, dependencies, usage, demand, and service levels over time, transforming data into information used to implement strategic IT initiatives...

Work Order Module is designed for Palm OS-® devices.

Used with MicroMain XM(TM) CMMS/EAM system, xmMOBILE(TM) v6.1 enables work orders and inspections to be transmitted electronically to maintenance technicians using PDAs and barcode scanners. Users have ability to access work orders, complete tasks, and update work orders at point of work performance. Labor in/out time is automatically calculated, filtering allows users to limit amount of data...

Water Treatment System provides continuous deionized water.

Self-contained, skid-mounted ADVANCED AMBERPACK ADI-60 includes flat head service vessels, regeneration system, rinse recycle pump, PLC automation, and optional membrane degasification system. It can be delivered in shipping container or trailer and plugged in on-site to produce continuous flow of deionized water with up to 98% water yield for power, chemical, paper, and electronics industries....

Custom Fabrication & Machining Services with Over 30 Years of Experience

As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.