Modules

I/O Module connects inverter to fieldbus protocols.

I/O Module connects inverter to fieldbus protocols.

Model 750-653/000-021 RS-485 interface I/O module provides communication link between MOVIDRIVE frequency inverter and programmable fieldbus controllers. Connection provides 3 words of process input data, as well as 3 words of output data from converter for decentralized control or network master control via PFC. System offers connectivity to over 16 fieldbus protocols, as well as over 100 I/O...

Read More »
Source-Type Digital I/O Module has 8 inputs and 8 outputs.

Source-Type Digital I/O Module has 8 inputs and 8 outputs.

Suited for simpler control system architectures, 16-channel ADAM-6052 provides 8 digital inputs and 8 source-type digital outputs. Built-in web server, based on Java programming language, enables users to remotely read values and can be customized to meet exact requirements. Communication watchdog and network failure safety function resets outputs to pre-configured values if network failure takes...

Read More »

I/O System is water and corrosion proof.

ArmorPoint(TM) I/O combines benefits of plug-and-play system with IP67-rated design. It consists of adapters, I/O modules, power supplies, and backplane bus extenders. ArmorPoint includes 30 I/O modules and communication adapters for DeviceNet(TM), ControlNet(TM), EtherNet/IP(TM), and other open networks. Small increments of I/O per module are provided with 1-8 channels. I/O module types include...

Read More »

I/O Module is rugged and IP67 rated.

ArmorBlock(TM) I/O series combines adapter, power supply, and I/O into industrially sealed package, making it suitable for distributed, on-machine applications. Eight-point version can be configured for any mix of I/O, such as 7 inputs and 1 output, or 2 inputs and 6 outputs. IP67 rated unit is resistant to water and corrosion, and can be front or side mounted directly on machine. Series includes...

Read More »
Module provides EtherNet/IP connection to drives.

Module provides EtherNet/IP connection to drives.

Allen-BradleyÂ-® 1203-EN1 gives Ethernet-based control and data access to SCANport(TM)-enabled drives. Both new and legacy systems can be controlled, configured, and have data collected over EtherNet/IP. Module sends and receives drive operating and metering data, provides parameter read/write access, and offers additional Ethernet/IP features such as Web-page monitoring and e-mail...

Read More »
Voltage Amplifier Modules cover bandwidth from DC-500 MHz.

Voltage Amplifier Modules cover bandwidth from DC-500 MHz.

Series HVA Amplifier Modules feature gain ranges from 20-60 dB and low input noise of 0.9 nV/SQR(Hz) minimum. Four models in series have 2 gain settings. Small size of EMI shielded package allows use close to signal source, eliminating noise pick-up from long signal cables. Amplifiers are available with 50 ohm bipolar input for low impedance sources or 1 M ohm FET input for high impedance...

Read More »
Bus Controllers suit military PC/104 computer applications.

Bus Controllers suit military PC/104 computer applications.

Single- and dual-channel PC/104 1553 Boards include device driver support for WindowsÂ-® 9x/2000/NT/XP and DOSÂ-® 6.2, as well as source code for C and Visual C, which can be ported to LinuxÂ-®, VxWorksÂ-®, QNXÂ-®, or other real-time operating systems. Satisfying requirements of MIL-STD-1553B Notice II, modules are built around Aeroflex UTMC's SÂ-µMMIT(TM) 1553 processor,...

Read More »

Module connects drives to EtherNet/IP.

Allen-Bradley 1203-EN1 module allows company's SCANport(TM)-enabled drives to be controlled, configured, and have data collected over EtherNet/IP. Module sends and receives drive operating and metering data, provides parameter read/write access, and offers features such as Web-page monitoring and e-mail notification. In conjunction with company's DriveExplorer(TM) and DriveTools(TM) SP software,...

Read More »
RTD Input Modules suit remote I/O functions.

RTD Input Modules suit remote I/O functions.

BusWorksÂ-® 966EN Input Modules interface up to 6 RTD or resistance signals directly to Ethernet Modbus/TCP 10/100 network. Each unit accepts universal RTD/resistance inputs with user-selectable ranges for platinum, nickel, or copper RTD sensors and 0-500 ohm signals. Three-way 1,500 Vac isolation between input, network, and power circuits protects against surges and ground loops. Each module...

Read More »
Disk Module provides multiple mass storage solutions.

Disk Module provides multiple mass storage solutions.

Field-replaceable, 6U CPCIStor supports boot strap, application load, and data storage in single slot. Unit provides 32-bit, 33 MHz CompactPCI interface, has on-board ATA controller, and supports hot-swap removal. It is available with 2.5 in. ATA hard drives up to 80 GB, or CF-II drives up to 4 GB each. Front panel provides activity LEDs and ejector handles for removal. CPCIStor is supported...

Read More »

All Topics