EtherCAT Slave Module enables precise laser micro-machining.
Enabling direct control of any laser source, LCMv2 Series EtherCAT slave module features a universal electrical interface. Designed for processing or machining applications, EtherCAT includes a high speed laser control signal output, a dedicated safety interlock input, fault input, enable output, and 8/8 general purpose digital I/Os. Module is fully configured and commanded by any of ACS' line of...
Read More »
WiFi Modules support embedded and 802.11ac applications.
Based on Cypress Semiconductor Corp. radios, Sterling-LWB5 certified dual-band 802.11 a/b/g/n/ac Wi-Fi-®, Bluetooth-®, and Bluetooth-® Smart Module enables companies to add wireless capabilities to electronic products typically running Linux. Sterling-LWB for WICED reference platform provides electronics developers everything needed to add both embedded Wi-Fi and Bluetooth Low Energy...
Read More »
Interface Board supports industrial and commercial LCDs.
Designed for industrial applications, such as production automation displays, Model ALR-1400v2 provides ARGB (VGA) and DVI inputs with OSD or RS-232 serial selection control to drive LVDS panels up to 1440 x 900 resolution. LCD controller includes features for OEMs, such as auto EDID settings, availability of custom EDID settings, custom splash screen, and firmware updates over DVI. Measuring...
Read More »
Sensor/Actuator Hubs feature expansion port.
Featuring 8 ports for 16 inputs/outputs, IO-Link Actuator/Sensor Hubs allow for example signals from up to 16 switching sensors to be collected from distance of up to 20 m so they can be made available to machine controller via IO-Link and IO-Link master using 3-conductor cable. Slot 7 can be reconfigured as expansion port by means of parameter entry. Complete valve plug or additional sensor hub...
Read More »
Thinking About Manufacturing Automation?
Check out this white paper to learn how cobots are able to automate manual processes.
Read More »
DRML1 Load Monitoring Module monitors up to 8 heating elements from 1.2 Amps up to 50 Amps current range.
Designed for NOVA22 solid-state relays, DRML1 Load Monitoring Module measures the current value and compares it against a pre-set value stored during installation. Applicable in quality supervision of plastic parts production in injection molding, thermoforming machines and rubber parts production. DRML1 Module operates in temperatures between 25-°C to +70-°C, monitoring of up to 8 loads, and,...
Read More »Interface Module connects multimedia source unit to boat MFD.
With MW6 Interface Module, marine source units can be seamlessly added to boat's onboard NMEA 2000 network, enabling control of source units directly from boat's Multi-Function Display. Boaters can control various audio system functions, including power on/off, volume, source selection, and play/pause directly from UI of MFD. Additionally, MW6 enables 2-way communication between source unit and...
Read More »
Ericsson PIM4710PD feature I2C/PMBus interface for energy-monitoring functionalities.
Offering high current handling of 20A and power capability of 780W at the lower end of its input-voltage range with the capability to handle up to 1080W with a 54V input, Ericsson PIM4710PD is suited for server and storage systems employing either distributed power or intermediate bus voltage architectures. 2.28 x 1.45 x 0.84in (57.9 x 36.8 x 21.33mm) in size, PIM4710PD is optimized to simplify...
Read More »
Tianma NLT USA Introduces Six New 5.7-Inch LCD Modules with built-in LED driver board.
With a wide operating temperature range (-30 to +80 Celsius), high contrast ratio of 900:1, and excellent display performance in industrial environments, Tianma NLT 5.7-inch VGA, and 5.7-inch QVGA models have CMOS interfaces, excluding one belonging to the VGA module that has an LVDS interface.- VGA models are suitable for applications prone to shock and vibrations upto 6.8G such as construction...
Read More »
Power Distribution Blocks have touch safe design.
Suitable for use with copper conductor, touch safe power distribution blocks have transparent cover- that both aids visual inspection and provides IP20 touch safe protection. Cover design incorporates dovetail tabs for nesting connectors together to create multiple configurations, and step shape design of copper alloy block- facilitates installation in confined spaces. Connectors can be...
Read More »
Voltage Regulator/Power Distribution Module offer versatility.
Using common standoffs, VR6 Voltage Regulator snaps together with PDS8 Dual Input Power Distribution Module, saving enclosure space to provide 5 Vdc or 12 Vdc and 24 Vdc simultaneously – individually selectable over each of 8 outputs. Offering surge suppression, regulator features 24 Vdc input at 1.75 A with output of 5 Vdc at 6 A, and 24 Vdc input with 12 Vdc output at 6 A. Power distribution...
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
