Flow Meter Switch has bistable switch functionality.
Model DS01 Flow Meter/Switch utilizes variable area principle to operate through use of spring-loaded, magnetic float mechanism. Used for measuring and monitoring low viscosity liquid and gas flow, it is rated for ranges from 60 mLpm to 150 Lpm for water and 2 to 625 Lpm for air. Relative rate of flow is indicated by etched marking on site glass and through use of reed contact mounted in sealed...
Read More »
Flow Switch protects against flow variation.
Vane operated C-WD15-S0 is magnetically actuated and supplied with field adjustable multi-layer vanes for installation in pipes from 1 1/2 to 20 in. Unit fits directly into pipeline tee, thredolet, or flange and meets NEMA-4 watertight construction. It is explosion proof and withstands pressures to 2,000 psig. There are no bellows, springs, or seals to fail. C-WD15-S0 is suitable for fluids and...
Read More »
Flow Switch offers response time of 1 to 10 seconds.
GT10 Thermo-Flo(TM) Gas Flow Switch provides flow detection and switching from 1 to 90 fps. Setpoint can be changed with single-turn of adjustment knob, which doubles as LED indicator for flow/no-flow status indication. Short version probe is for use in ducting from 1/2 to 1 1/2 in., while longer version is applied from 2 in. up. All-plastic sensor construction is either PP/Ryton(R) or PVDF...
Read More »
Crosspoint Switches operate up to 3 Gpbs from 2.5 V supply.
SY55854U 3Gbps single 2x2 CML switch, in 16-pin QSOP package, operates from supply voltage as low as 2.3 V. Output channel-to-channel skew is guaranteed to be less than 15 ps over temperature and voltage. SY55858U and SY55859L dual 2x2 CML switches come in 32-pin TQFP and 32-pin MLF packages, respectively. SY55858U includes flexible, 3-pin input stage. SY55859L operates up to 2.7 Gbps and...
Read More »
In-Mold Electronics
To learn more about in-hold electronics (IMEs) and solutions offered by Eastprint, Inc., download now.
Read More »
Flow Switch features in-line design.
FS-380P is constructed with polypropylene housing, PPS composite pistons, 316 wetted parts, and fluorocarbon O-rings. Operating pressure is 200 psi @ 70 deg F and 100 psi @ 212 deg F. Fixed set points range from 0.25 to 2.0 gpm. Switch is offered with 3/8 in. MNPT or quick disconnect ports and selection of mating connections including NPT, BSP, barb, and tube connections. Switch action is SPST 10...
Read More »
Turnkey System provides DC/RF/Opto hybrid switching.
Fully integrated System 40 can consist of Keithley 7001 or 7002 switch controller, and switches, attenuators, couplers, and other components integrated into 19 in. rack-mount package. Choice of 40 types of cards provide custom switching options for up to 400 channels. Interconnecting ATE through pre-programmed System 40 improves utilization of automated instruments such as communication analyzers...
Read More »
Flow Switches are tough and moisture resistant.
Enhancements to FS-4 Series make them more physically robust and improve moisture resistance. They have more robust inlet/outlet port hubs and uniform wall thickness around internal port threads to better withstand rough installation techniques and other abuses. Subassembly is sealed with molded rubber grommet moisture barrier. Separate snap-on reed switch improves set point accuracy. Series...
Read More »
Photo Control turns on lights automatically.
NightStar(TM) electronic roadway twistlock photocontrol provides consistent day to day, season to season, turn on/ turn off control for maintaining critical time of day light levels. It has fully encompassed filtered silicon sensing element and heat dissipating mechanical for standard and high temperature applications.
Read More »
Optical Switch Cards automate test applications.
Model 7090 1x16 optical switches route single signal to 16 DUTs or 16 instruments. They switch optical signals in 1290 to 1650 nm range and use single mode fibers with FC/SPC and FC/APC connectors. All Model 7090 cards are compatible with company's GPIB-programmable Model 7001 and 7002 switch mainframes. Switches can be used in combination with Model 7090 1 x 4 and 1 x 8 optical versions, plus DC...
Read More »
Video Switch suits CCTV security monitoring.
Model 8508 8-channel video switch allows pushbutton selection of video from up to 8 sources. Signals from remotely located CCTV cameras are selected for viewing by high impedance video monitor at midpoint of security network or by low impedance video monitor at network's endpoint. All connections are made at rear panel of switch via BNC connectors. Maximum EMI/RFI shielding is attained by...
Read More »
Do You Have Unique Lifting Needs?
EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.
Read More »
