New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components
Inserts

New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components

Walter offers WSM01 Grade coupled with MS3 negative geometry for producing burr-free results with an improved surface finish quality in the hard materials. The grade's high power impulse magnetron sputtering PVD coating produces smooth surfaces. The Unit is suitable for machining ISO S materials such as titanium alloys, cobalt-based alloys and nickel-based alloys. The MS3 insert comes with...

Read More »
New Spectro Genesis ICP-OES Analyzer Offers High-Matrix Compatibility
Gas / Chemical Analyzers

New Spectro Genesis ICP-OES Analyzer Offers High-Matrix Compatibility

Spectro Genesis ICP-OES Analyzer is equipped with laterally diffused metal oxide semiconductor (LDMOS) generator that delivers up to 1700 W power. The Unit offers factory calibrated method packages for applications such as waste water, sludge, soil, fuels and wear metals/additives in oil. The generator improves the agility of the instrument during rapid change of plasma loads. Analyzer is...

Read More »
New 5100P Series Gas Analyzers Allow Measurement in Remote Locations
Gas / Chemical Analyzers

New 5100P Series Gas Analyzers Allow Measurement in Remote Locations

Ametek’s 5100P Series Gas Analyzers are based on the non-contact tunable diode laser absorption spectroscopy (TDLAS) sensing technology that enables user to perform water vapor measurements in remote locations. Unit is suitable for monitoring H₂O in natural gas pipelines, processing and fuel lines. The TDLAS technology offers quick response to changes in the moisture content of natural gas....

Read More »
New Transparent Receiver is Manufactured with Solid Aluminum Housing
Receivers

New Transparent Receiver is Manufactured with Solid Aluminum Housing

Pinpoint Laser Systems’ 2 in. Transparent Receiver window measures 2 x 2 in. down to 0.0001 in. and over a distance of 150 ft. Unit comes with reference surfaces and mounting points for industrial applications. The receiver is used in machine tool runout, lathe and spindle alignment, roll and web alignment and precision bore alignment. Unit allows incoming laser reference beam to pass through...

Read More »
New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components
Inserts

New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components

Walter offers WSM01 Grade coupled with MS3 negative geometry for producing burr-free results with improved surface finish quality in the hard materials. The grade's high power impulse magnetron sputtering PVD coating produces smooth surfaces. Unit is suitable for machining ISO S materials such as titanium alloys, cobalt-based alloys and nickel-based alloys. MS3 insert comes with jet-guiding...

Read More »
Rigaku Analytical Devices Chosen for Project Global Shield, a World Customs Organization Program
Analyzers

Rigaku Analytical Devices Chosen for Project Global Shield, a World Customs Organization Program

Progeny ResQ 1064nm handheld Raman analyzers selected to support global efforts to counter illicit diversion and trafficking of precursor chemicals used in explosive devices. WILMINGTON, MASS. (PRWEB) JULY 11, 2018 - Rigaku Analytical Devices, a leader in advanced handheld and portable spectroscopic analyzers, has been chosen to provide its Progeny ResQ system to be used in Project Global...

Read More »
New ATLAS SpinTite Threaded Inserts Come with Blind Installation Capability
Inserts

New ATLAS SpinTite Threaded Inserts Come with Blind Installation Capability

ATLAS® SpinTite Blind Threaded Inserts are available in half-hex shank low-profile head, rib-wall minimized-profile head, rib-wall low-profile head, thin-wall low-profile head and swaging low-profile head versions. Units are used with panels or sheets of materials such as metal, plastics, and fiberglass with thickness up to 0.51 mm. Suitable for applications such as tubing and extrusions,...

Read More »
Latest Teledyne LeCroy Mercury T2C/T2P USB2.0 Protocol and Power Analyzers Offer VBUS Analysis with Support for DisplayPort Auxiliary Channel Message Decoding
Miscellaneous Analyzers

Latest Teledyne LeCroy Mercury T2C/T2P USB2.0 Protocol and Power Analyzers Offer VBUS Analysis with Support for DisplayPort Auxiliary Channel Message Decoding

Saeligs’ new Mercury T2P/T2C USB2.0 analyzers offer full support for USB 2.0 protocol testing and add USB Type-C analysis capabilities. The analyzers capture as well as decode the wide range of USB 2.0 device classes plus Type-C link states and Power Delivery 3.0 messages using two base models, the Mercury T2C and T2P. The power tracker tool monitors the real-time voltage and current on VBUS,...

Read More »
Fixtureworks to Feature Expanded Product Line at IMTS 2018
Plungers

Fixtureworks to Feature Expanded Product Line at IMTS 2018

Fixtureworks® (Fraser, MI), a leading supplier of clamps, fixturing accessories, machine tool and material handling products, will showcase several new product lines in Booth W-432377 at IMTS, September 10-15, 2018 McCormick Place, Chicago. Highlighting the exhibit will be its lineup of all-new bearing wheels, indexing plungers and TG GripSert inserts from Fairlane® Products; Imao® One-Touch...

Read More »

All Topics