New Heaters Products

Heater Line offers hydronic, kickspace, and aesthetic units.

Horizontal and vertical hydronic heaters, Series BH and BV, are made with reinforced 18- and 16-gauge cold rolled steel, respectively. Both provide quiet operation and are treated for corrosion-resistance with epoxy-based powder coating. Series BKS kickspace heater uses cross flow fan technology and includes epoxy-based powder coated finish. Panelray features flat tube steel design with broad...

Tabletop Shrink-Fit System suits smaller shops.

Thermax induction heating unit shrink-fits H-6 tolerance cutting steel and carbide cutting tools from .125-1.00 in. dia into V-flange and HSK Shrinker tool holders with tool lengths to 18.75 in. Preprogrammed, 7.5 kw unit offers pushbutton operation, provides 4 quick-change heating coils, and stores programs in integrated PLC. With 4 heat-sink cool-down positions, 220 V, 3-phase heating system...

IR Tube Heater promotes ease of installation/accessibility.

Available in lengths from 10-70 ft, STS-JZ commercial and industrial infrared radiant tube heater offers 8 firing rates from 45,000-200,000 Btuh. It distributes heat uniformly due to webbed hanger plates that promote free passage of entrapped convection heat. Design facilitates installation with single-piece hanger system that has swaged tube locking system and reflector covered modular 90Ã-

Drum Heater features stainless steel construction.

Designed to replace inefficient homemade hot rooms and awkward band heaters, Sahara Hot Box Model SV8 heats up to eight 55-gal drums. It uses steam up to 200 psig and can reach temperatures to 300Ã-

Custom Progressive Metal Stamping for Manufacturing EMI Shielding

A Guide to Containing EM Radiation Through Custom Progressive Metal Stamping

Radiant Tube Heaters come in low-intensity versions.

Available in 19 sizes with capacities from 40,000-250,000 BTU/hr, LTU unitized, gas-fired radiant U-tube heaters are offered in natural and propane gas versions. Total heater length varies from 17-27.5 ft, and units incorporate self-contained draft inducer; one-piece cast-iron burner; pre-assembled tube and reflector body with 6-bolt aluminized steel burner box assembly; and monitoring lights for...

Tankless Water Heater is offered for lavatory systems.

ExpressÃ-® Lavatory System models in MG- and SS-Series are available with optional electric tankless water heater, which provides hot water on-demand. Eliminating need for separate storage tank, handwashing fixtures with optional heaters are connected to cold water and do not need hot water piping. Factory pre-set at 105Ã-

IR Tile Remover allows lifting of asbestos tiles intact.

Modular Novastrip infrared tile remover heats tiles and allows them to be lifted intact, preventing release of harmful dust or hazardous material. Novastrip 196 has 14 x 14 in. footprint, while Novastrip 1026 has 28 x 48 in. footprint. Latter removes up to twelve 9 x 9 in. or six 12 x 12 in. tiles at once. Both models feature solid-state electronics and rapid heat-up and cool-down. Heat panel...

Clear Screen Heaters refresh 2-3 times/second.

Clear Screen Heaters are suited for LCDs that need fast response time at temperatures down to -40Ã-

Circulation Heaters provide consistent temperature control.

CAST-X SERIES 1000 provides safe heating method for volatile, viscous, or mildly corrosive liquids. Aluminum cast construction provides optimum temperature control through ability to maintain heat consistently. Units utilize helically-coiled tube to eliminate direct contact between fluids and tubular elements of heater, eliminating hot spots caused by poor flow conditions. They can safely run dry...

Radiant Heaters may be used indoors or outdoors.

Offered in 3 sizes, CRDS, CRDP, CRTS, and CRTP 2- and 3-element fixtures are available with painted steel or stainless steel housings. They accept interchangeable metal sheath, quartz tube, and quartz lamp elements. Single-element CRC fixtures, with quartz-tube elements, come in 1,500, 2,000, and 3,000 W sizes. Plug-in radiant heaters, CPRG and CPRP, feature quartz tube elements, and RBC-1...

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.