Electrical Box Supports work with stud depths up to 4 in.
Electric Box Hangers

Electrical Box Supports work with stud depths up to 4 in.

H23 Box Mounting Brackets attach 4 and 4 11/16 in. outlet boxes to wood or metal studs, accommodate 2Â-½ and 3½ in. stud depths, and comply with NEC® Article 300.4(d) and CEC® Rule 12-3012. Extending stud depths to 4 in., CADDY MEB1 brackets mount on either side of stud without need to reposition box, and include V-notch on center for consistent positioning. Both...

Read More »
Anvil's Revolutionary 260 Insulation Saddle System Eliminates Wood Block and Shield Systems
Pipe and Tube Hangers

Anvil's Revolutionary 260 Insulation Saddle System Eliminates Wood Block and Shield Systems

Huge Labor Savings for Plumbing, Mechanical, Insulating Contractors PORTSMOUTH, NH, June 13, 2006 - Anvil International, the largest and most complete fitting and hanger manufacturer in the world, recently announced a revolutionary product for installing insulation. The new 260 Insulation Saddle System (260 ISS), for copper and steel pipe systems, dramatically saves time and money by eliminating...

Read More »
Cable Retainer facilitates cable run direction changes.
Cable Hangers

Cable Retainer facilitates cable run direction changes.

Installed vertically or horizontally on racks, ceilings, and walls, CADDY® CATCR50 plastic, low-voltage cable support is designed for use with CAT 5e and higher, fiberoptic, and coaxial cable. Rounded edges avoid over-bending and kinking of cables, and closure has locking teeth that retain bundled cable in one-piece support. UL®-recognized for air-handling spaces, product requires...

Read More »
Slotted Clevis Hanger helps reduce pipe hanging time.
Pipe and Tube Hangers

Slotted Clevis Hanger helps reduce pipe hanging time.

Available in 2 and 4 in. sizes, electro-zinc plated CADDY® SLOT LOCK is UL®-Listed and meets Factory Mutual deflection requirements without need for additional spacers. Removable slotted crossbeam accelerates assembly time and minimizes deflection by capturing top and bottom legs and locking them in place under load. Notches in crossbeam prevent it from working loose, even under...

Read More »
Cable Hangers

Cable Anchor organizes up to 8 cables at a time.

Made from impact-resistant material, flame-retardant Cable Anchor(TM) secures multiple power, voice, data, and video cables to wood studs and plates using one nail. Holding fingers prevent each cable, regardless of size, from going slack during installation. Anchor positions all cables at least 1Â-¼ in. from edge of studs and plates to meet 2005 NEC 300-4(d) and Canadian Electric Code Part...

Read More »
Support System suspends static loads.
Supports

Support System suspends static loads.

Consisting of 1.5 mm wire rope with crimped-on hook, CADDY® SPEED LINK LD holds working loads up to 44 lb with 5:1 safety factor. Stainless steel locking device ensures stability and allows for additional vertical adjustment after wire insertion. System installs without drilling or tools and allows objects to be hung at an angle. Available in 6.6, 16.4, and 32.8 ft lengths, CADDY®...

Read More »
Cable Hangers

Clamps, Straps, and Hangers fasten electrical conduit.

Clamps, straps, and hangers assist contractors in running and anchoring electrical conduit. Clamps are formed from malleable iron with galvanized finish, and accommodate conduit in trade sizes from Â-½-6 in. They secure rigid or flexible metal conduits, and IMC or EMT running across, parallel, or perpendicular to beams, channels, cable tray, and angle supports. Steel hangers and snap-type...

Read More »
Pipe Hanger/Restrainer has timesaving standoff design.
Pipe and Tube Hangers

Pipe Hanger/Restrainer has timesaving standoff design.

Available in sizes Â-¾-2 in., TOLCO(TM) Figure 28 provides contractors with standoff hanger and restrainer for CPVC plastic pipe. Single-piece, snap-in design facilitates installation by eliminating need for wood blocking extensions. Product feature flared edges to protect plastic pipe from scratches and abrasions. It meets NFPA 13 requirements and is UL Listed for installation into 3/8 in....

Read More »
Cable Hangers

Hangers support flexible RF transmission line cables.

Suited for LMR® low loss coaxial cables, clip hangers are available for sizes 600-1,700 and standard hangers for sizes 400-1,700. Designed for supporting single runs of cable in wireless systems, both types of hangers are fabricated from corrosion-resistant, stainless steel for use in extreme weather conditions. Clip hangers feature locking mechanism, while standard hangers have pre-formed...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics