New KAPP NILES ZP 12 Gives True Gear and Spline Ltd. True Gear Power
Gear Grinders

New KAPP NILES ZP 12 Gives True Gear and Spline Ltd. True Gear Power

True Gear Spline Ltd. increases grinding capacity and product range with new NILES ZP 12 Cambridge, ONÂ- – True Gear Spline Ltd. has added CNC gear profile grinding to their machining capabilities with their newly installed NILES ZP 12 gear grinder. The recently redesigned NILES ZP 12 will allow True Gear Spline to grind larger gears, with much higher tolerance, and increased speed,...

Read More »
Ergonomic Cordless Cut-Off/Angle Grinder uses brushless motor.
Grinders

Ergonomic Cordless Cut-Off/Angle Grinder uses brushless motor.

Powered by 18V LXT® Lithium-Ion 4.0 Ah battery, XAG06M has 5.6 lb design with flush-mount paddle switch andÂ- rubberized soft grip. Automatic Speed Change™ Technology adjusts speed and torque for optimum performance, and BL™ brushless motor, which delivers 8,500 rpm with soft start, is electronically controlled to optimize battery energy use and run time. Extreme Protection...

Read More »
Flow Tuning and Measurement System offers accuracy to ±1%.
Flow Monitors

Flow Tuning and Measurement System offers accuracy to ±1%.

Based on MICROFLOW technology, which monitors flow of abrasive media through small passages in real-time, EXTRUDE HONE™ MF PROGRESS™ is aimed at orifices 100–350 Â-µm in parts less than 30 mm in diameter and flow rates up to 5 lpm. Modular system is available in various inside station layouts, including flow tuning, media reclaim, flush module, test module, and marking. Machine comes...

Read More »
Vertical CNC Grinder includes polygon capability.
CNC Machinery

Vertical CNC Grinder includes polygon capability.

Featuring compact 10.76 ftÂ-² main body, Model GPV-10-20 is powered by direct drive motor which facilitates polygon grinding. System features 3.93 in. diameter swing over table, max work piece height of 7.87 in. and weight capacity of 22.05 lb. Gate structure ensures accuracy by counter measuring against vibration, thermal displacement, and noise. Mounted on wheel side of wheelhead,...

Read More »
Machining Center combines turning and grinding.
Turning Machinery

Machining Center combines turning and grinding.

CombiningÂ- vertical turning technology with finish grinding, Model VLC 100 GT is suitable for chucked components up to 100 mm in diameter, such as gears, single cams and cam rings, pump rings, or sprockets. Main spindle provides max speed of 6,000 rpm and power rating of 19.5/12.5 kW at 40%/100% duty cycle. Equipped with integrated measuring technology, machine utilizes pick-up concept...

Read More »
Gear Grinders

GMTA News of Note

Ann Arbor, Michigan – GMTA (German Machine Tools of America) represents various top-quality German metalworking machine builders, including Wera Profilator, K + G, Pittler, Praewema and WMZ, as well as Arnold lasers and Rosink parts washers.Â-  These machines are sold to the North American market exclusively by GMTA, primarily for gear and spline production, as well as other power...

Read More »
Drake Manufacturing Recognized with Nexteer Supplier Award
Cylindrical Grinders

Drake Manufacturing Recognized with Nexteer Supplier Award

Drake Manufacturing Services Co., LLC, a Warren, Ohio, precision CNC manufacturing systems builder, was recognized during an awards presentation at the Nexteer 2014 Indirect Supplier Conference in Saginaw, Michigan. The award was presented to Drake for their part played in the successful launch of Nexteer Automotive’s K2XX product line for General Motors. A series of Drake GS:TI Internal Thread...

Read More »
Drake Delivers another Drum Grinder for the Tapered Roller Bearing Industry
Grinders

Drake Delivers another Drum Grinder for the Tapered Roller Bearing Industry

WARREN, OH — Drake Manufacturing Services Co., LLC delivered a so-called “Drum” or “Crown” grinder to an Asian manufacturer of tapered roller bearings. The Drum is a threaded steel drive roll used in a centerless grinder to move the tapered rollers across the face of the grinding wheel. The rollers start on one end as rough blanks and emerge on the other as round rollers. The Drums wear...

Read More »
Lithium Batteries

Makita Rocks World of Concrete 2015

Makita delivers new tools, new accessories, and plenty of concrete for hands-on demonstrations La Mirada, CA – Over 50,000 concrete professionals converged on Las Vegas earlier this month for the World of Concrete trade show -- and Makita was ready with an array of new concrete tools and accessories, with hands-on demonstrations for attendees to feel the difference for themselves. Over 50,000...

Read More »
Machining Centers

CNC 5-Axis Grinder offers 2 aux slides for workpiece clamping.

Accommodating micro tools, gun drills, hob cutters, and complex geometries, 325linear machine operates in 2,500–4,000 rpm typ. Second auxiliary slide enables machine to utilize tool guidance, part support, tailstock, or workpiece pallets in operation. On A-axis, user can install collet, hydraulic expansion, or multi-range chucks. A-axis configuration also permits position-oriented clamping of...

Read More »

All Topics