AC Gearmotors are rated to 1-½ hp.
Parallel shaft 880 series, available in 5 gear ratios from 5.8:1-42.8:1, consists of totally enclosed, fan cooled motors with preloaded, permanently lubricated, shielded bearings and dynamically balanced rotor shaft. Able to produce up to 1,060 lb-in. continuous-duty torque, products feature 2- or 3-stage integral gear cases with AGMA grade 9 hobbed gears. Operation options include single-phase...
Read More »
DC Motors and Gearmotors suit wet and humid areas.
With max rating of Ã-¼ hp @ 2,500 rpm, DC WashguardÃ-® products meet IP55 environmental conditions and feature stainless steel or Mirolon 3300 fortified TeflonÃ-® output shafts. Motors are offered with face or base mounting. Gearmotors with parallel output shaft have ration options from 5:1 up to 336:1, with full-load torque exceeding 300 in-lbs. Right angle shaft configurations offer...
Read More »
Stepper Gearmotors feature 42 or 60 mm gearheads.
Two-phase NEMA 16, 17, and 23 Hybrid Steppers are available with custom windings, output shafts, and mounting holes. Gearheads measuring 42 mm are supplied with NEMA 16 and 17 steppers offering current ratings from 0.6-1.20 A/phase at 3.6-4.0 V, and holding torque from 1.73-6.94 lb-in. Gearheads measuring 60 mm feature NEMA 23 steppers offering current ratings from 0.85-1.50 A/phase at 4.0-8.6 V,...
Read More »
Gearmotors have 1.00 in. hollow output shaft.
Featuring chill cast bronze gearing and heat-treated steel worm, H Box Hollow Bore Gearmotors have hollow output shaft that can be connected directly to driven load, eliminating shaft couplings, chains, or sprockets. Units are offered in single and 3-phase configurations with Ã-½, Ã-¾, and 1 hp ratings. They use synthetic USDA H1 food-grade oil and are sealed for maintenance-free...
Read More »
A Guide to the Non-Metallic Precision Stamping Process
This white paper provides a guide to the non-Metallic precision stamping process.
Read More »
AC Induction and Reversible Gearmotors suit varied OEM uses.
Suited for applications from 0.67-390 in.-lb, AC induction gearmotors are bidirectional after stopping, while reversible induction motors can change direction on-the-fly. Standard gearmotors include 44 models of 4, 6, 10, 15, 25, 40, 60, 90, 120, and 140 W motors integrated with gearheads with 22 different ratios from 3:1 through 180:1. CE and UL certified products are also available with custom...
Read More »DC Gearmotor accepts 12 Vdc and 5.7 A.
Measuring 54 mm in diameter x 168 mm long, planetary gearmotor Model MMP-SM21.12V/GPK-29:1 delivers up to 10 Nm of output torque at nearly 200 rpm of shaft output speed. It is suited for battery-powered applications and IP65 rated for harsh environments. Brushless, hall cell commutated version is also available.
Read More »Micro Gearmotors are battery-powered.
MMP-MGM Series DC Gearmotors, ranging in size from 12-42 mm dia, have compact, fully enclosed TENV design that employs 3, 6, 12, or 24 Vdc windings, depending on model. Suited for battery powered or other low voltage DC applications, products are available with spur or planetary gearing, ratios from 2:1 to 3000:1, and output torques to 4.5 Nm peak. Applications include robotics, portable...
Read More »
Inverter Duty Gearmotors come in 2 shaft configurations.
Designed for use with adjustable speed controls, gearmotors utilize inverter spike resistant magnet wire for protection against voltage spikes and corona damage. Rated at 3/8 hp, 230 V, 60 Hz, 3-phase, products have operating range of 10-90 Hz and feature gear ratios from 5:1-75:1 for right angle and 5:1-30:1 for parallel shaft configurations. Right angel units feature internal oil expansion...
Read More »
DC Gearmotor features integral speed control.
Miniature, brushless, 12 V Model LB16-120-BB uses 120:1 spur geartrain to provide rated torque of 3.5 oz-in. at 100 rpm, and achieves continuous load range of 0-6.9 oz-in. Peak torque of 50 oz-in. at 0.8 A is available for starting and accelerating conditions. Input voltage varies from 3.5-13.2 Vdc for variable speed control operation. Measuring 0.63 in. OD x 1.31 in. long, motor weighs less than...
Read More »Right Angle Gear Motors run at 1,800 rpm.
Hollow Shaft Gear Motors can be base, end, side flange, shaft, or pilot mounted. Shaft options include Ã-¾ in. hollow, along with double and single extension Ã-¾, 5/8, and Ã-½ in. diameter shafts with keys. Three AC motor options and 4 DC motor options span horsepower range from 1/8 to Ã-¼ hp with gear ratios from 5:1-60:1. Gear motors are all ball bearing and synthetic oil...
Read More »
Precision Machining Solutions with Over 25 Years of Experience
Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.
Read More »
