Gearmotors

Right-Angle Gearmotor operates quietly.
Gearmotors

Right-Angle Gearmotor operates quietly.

Model M1500 G4 PM dc gearmotor has metal construction and Bakelite gear that provides quiet operation for noise sensitive applications. It is available in 12 to 115 V models, with maximum continuous torque ratings to 7 lb-in. Motors are UL approved and have ceramic magnets, double-shielded ball bearings, Class F insulation, dynamic alloy balanced armature, TENV design, externally replaceable...

Read More »
Gearmotors

Gearmotors and Reducers connect to any electric motor.

Helical Series M has Cone Drive motor connection that allows fitting any size of standard NEMA and IEC flange mounted electric motor including ac, dc, single phase, energy efficient, washdown, and explosion proof. Gearmotors handle up to 120 hp or 90 kW with maximum output torque of 97,350 lb-in. Reducers are available in 12 unit sizes for ratios of 1.2:1 to 12,000:1 in single, double, triple,...

Read More »
DC Motors/Gearmotors feature skewed armatures.
Gearmotors

DC Motors/Gearmotors feature skewed armatures.

LO-COGÂ-® Series 8000 brush-commutated DC motors and gearmotors feature 7-slot skewed armatures designed to minimize magnetic cogging. Motors are available in 3 lengths and can achieve peak torques up to 16.8 oz-in. and speeds to 10,650 rpm. Gearmotors are offered in 3 lengths with 11 ratios from 6.3:1 to 1803.6:1 and can achieve peak torques to 100 oz-in. (standard) or 160 oz-in. (with...

Read More »
Gearmotors have sealed design to keep oil clean.
Gearmotors

Gearmotors have sealed design to keep oil clean.

Improved right angle single reduction gearmotors are available from 1/2 to 25 hp, in ac and dc. They have internal expansion bladder and Mobil synthetic SHC 634 oil bath lubrication. Because gearmotors are not vented, outside contamination from environment cannot enter and oil stays clean. Other improvements include induction hardened and ground worms for increased life, and castings that...

Read More »
Planetary Gearmotors suit OEM applications.
Gearmotors

Planetary Gearmotors suit OEM applications.

Compact, 16 mm Planetary Gearmotors are offered with range of motor windings, gear box housings, gears, and gear ratios. DC motor has speed range of 7 to 3,000 rpm and can be specified for any voltage from 1 to 36 V. Lightweight, 1-, 2-, 3-, and 4-stage gearmotors have torque range of 1 to 30 oz-in., standard ratios from 3.6:1 to 450:1, are 90% efficient, and weigh 1.5 oz. Standard housing and...

Read More »
Right Angle Gearmotor provides high torque.
Gearmotors

Right Angle Gearmotor provides high torque.

M4000 G14 PM DC Series single worm right-angle gearmotor is available in 12 to 180 V models, with continuous torque of 16 to 60 lb-in. and speeds up to 500 rpm. Typical applications are wheelchairs, scooter drives, welding wire feeders, conveyor drives, packaging equipment, and floor cleaning equipment. It has bronze gear, high energy ceramic magnets, ball bearings, Class F insulation, balanced...

Read More »
Washdown-Duty Wormgears suit food and beverage industry.
Gearmotors

Washdown-Duty Wormgears suit food and beverage industry.

Enhanced Protection W Series and VF Series wormgears and gearmotors can be installed in areas requiring high levels of hygiene and corrosion resistance. Complete units have exterior-washdown, epoxy coating, approved by USDA and Agriculture Canada, with stainless-steel fittings for installations in close proximity to food, drug, and beverage operations. Additional applications include marine and...

Read More »
Gearmotor produces up to 1050 lb-in. torque.
Gearmotors

Gearmotor produces up to 1050 lb-in. torque.

Model 42A-CG has 42A DC motor with Class F insulation on armature windings to withstand high operating temperatures. Synthetic grease permanently lubricates 3-stage gearing cluster of selectively hardened helical gears. Unvented gear reducer mounts in virtually any position, by integral face-mounting flange, with no lubricant leakage. Keyed, 1 1/8 in. diameter driveshaft delivers output torque to...

Read More »
Gearmotors now come in smaller sizes.
Gearmotors

Gearmotors now come in smaller sizes.

New models in Clincher(TM) line of parallel shaft-mount gearmotors and speed reducers include: SK0182NB with gear ratios from 4.24:1 to 81.0:1, output speeds to 413 rpm and torque up to 1,027 lb-in.; SK0282NB with ratio from 4.03:1 to 139.0:1, output speeds to 434 rpm and torque to 1,443 lb-in.; and SK1382NB with ratios from 16.28:1 to over 381.0:1, output speeds to 107 rpm and torque to 3,275...

Read More »
Brushless Gearmotors handle temperatures up to 155 deg C.
Gearmotors

Brushless Gearmotors handle temperatures up to 155 deg C.

TitanTRUE Brushless Gearmotors are available in 2, 3, and 4 in. frame sizes with continuous rated torque up to 60, 127, and 244 in-lbs, respectively. Power transmission consists of True Planetary gearhead; CE rated brushless servomotor; optional emergency brake; and commutating, incremental encoder. Enclosure's modular design utilizes bearing seals, gaskets, and o-rings to provide IP64 and...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics