Gearheads and Gearboxes

Gearmotors now come in smaller sizes.

Gearmotors now come in smaller sizes.

New models in Clincher(TM) line of parallel shaft-mount gearmotors and speed reducers include: SK0182NB with gear ratios from 4.24:1 to 81.0:1, output speeds to 413 rpm and torque up to 1,027 lb-in.; SK0282NB with ratio from 4.03:1 to 139.0:1, output speeds to 434 rpm and torque to 1,443 lb-in.; and SK1382NB with ratios from 16.28:1 to over 381.0:1, output speeds to 107 rpm and torque to 3,275...

Read More »
Gearheads have no backlash.

Gearheads have no backlash.

Lightweight PSA-G harmonic drive gearheads provide zero-backlash speed reduction for accurate angular positioning. Input-to-output gear ratios from 50:1 to 100:1 are available. They handle high axial and overhung loads, making them suitable for automation applications such as robotics and handling small components in assembly process. Maximum radial shaft loading is up to 115 lb. Gearheads are...

Read More »

Speed Reducers provide high torque in small size.

HHB Series has crossed helical gears and HWB Series uses worm and wheel gear. Both single reduction models are available with ratios from 1:1 to 60:1 and torque outputs up to 77 lb-in. All accommodate inch or metric bores via interchangeable shafting. Backlash is as low as 45 min. in some models. Input speeds as high as 6,000 rpm can be accommodated. Right angle input drive to output takeoffs are...

Read More »

Planetary Gearhead eliminates backlash creep.

Harmonic Planetary(R) HPG Series incorporates ring gear design that reduces backlash to less than 1 arc-min for life of gearhead. Unit is available in both flange output and shaft output configurations. Flange is supported by cross roller bearing, which provides low run-out and high concentricity. Applications include packaging, automation, and machine tools.

Read More »
Variable Speed Drive controls 2 to 4 pump systems.

Variable Speed Drive controls 2 to 4 pump systems.

PumpSmart Model PS 200 microprocessor based, variable speed drive is programmed specifically for centrifugal pumps up to 700 HP. Control of process parameters is obtained by continuous monitoring and reaction to both pump conditions and system demands. Pump output is matched to exact flow and head required by process. PS 200 protects pump from dry running, low suction, cavitation, dead heading...

Read More »
Speed Reducers withstand corrosive environments.

Speed Reducers withstand corrosive environments.

All-Stainless Steel Speed Reducers, with horsepower ranges through 5 HP, are available in frame sizes 918, 921, and 926 with quill-type 56C, 140TC, and 180TC NEMA C-face inputs. Construction consists of 304 cast stainless steel housings, covers, and shafts; stainless steel hardware; O-ring sealed C-face; and Mobile SHC 634 synthetic lubrication. Pressure compensation chamber prevents internal...

Read More »
Gearmotors/Speed Reducers operate at 95%+ efficiency.

Gearmotors/Speed Reducers operate at 95%+ efficiency.

90.1 Series helical bevel gear products are available as triple- or quadruple-reduction drives with foot, flange, or shaft mount configurations. They offer power ranges from 1/6 to 200 HP, output speeds from 0.1 to 218 rpm, torque up to 283,200 lb-in., and gear ratio ranges from 8.04:1 to over 300,000:1. Unicase(TM) housing eliminates oil leakage and contamination. Autovent sealing prevents...

Read More »
Gearheads incorporate clamping style input pinion.

Gearheads incorporate clamping style input pinion.

MRP all-planetary, low-backlash, servo-grade gearheads are available in 1 or 2 stages with ratios up to 100:1. Five sizes are offered: MRP-050, 070, 090, 120 and 155, which range from 2 to 6.1 in. square. Backlash specification is 10 to 15 arc-mins max depending upon gearhead size and number of gear stages. MRP round body gearhead has tapped holes in face of output shaft end, and square flange on...

Read More »
Gearheads and Actuators offer precise motion control.

Gearheads and Actuators offer precise motion control.

PS Series Flange Output (PSF) and Shaft Output (PSS) gearheads and actuators feature zero-backlash and high torque of harmonic drive gearing. They are available with range of input options and offer flexible integration allowing use with most servo or stepper motors. Units provide positional accuracy of less than 1 arc min and transmit torque loads up to 2900 in-lb. Ratios are available ranging...

Read More »

Gearing Components fit in small enclosures.

Ultra-flat CSD series harmonic drive gearing component sets use S-shaped tooth profile and are 50% shorter than previous CSF series, allowing surrounding enclosure to be made very compact. It has rated torque of 248 in-lb, maximum torque of 673 in-lb, and is available in gear ratios of 50, 100 and 160:1. Applications include robotics, aerospace, and factory automation.

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics