New Gearheads and Gearboxes Products

Reducers feature aluminum construction.

Bravo(TM) Worm Gear Reducers and LeCENTRIC(TM) Inline Reducers feature single piece housings impregnated with Resinol RT, vent-free designs, and factory lubrication with synthetic semi-fluid grease. Bravo model is available in four sizes with ratios from 7:1 to 4,000:1 and output torque up to 4,000 lb-in. LeCENTRIC model is available in four sizes with ratios up to 280:1 and output torque up to...

Worm Gear Reducers withstand rigorous washdowns.

All-Stainless reducers are available in 4 center distances in ratios from 5:1 through 100:1 with NEMA C flange, quill or coupling input, reducers feature O-ring on face of input flange and SS output shaft. Gear+Motor(TM) combinations come in single-phase ratings through 1Ã-½ hp, three-phase through 5 hp and permanent magnet DC through 1Ã-½ hp. Units are suitable for food processing,...

In-Line Gear Reducers offer double reduction and low noise.

Compatible with positive displacement pumps and other equipment in need of speed reduction, products have input and output shaft on same centerline for alignment and concentration of space. Gear reducers are available in 10 sizes with ratios from 2.6:1 to 35.1:1. Available hp ranges from 0.5-350 hp, while output speeds range from 50-673 rpm with 1,750 rpm input. Units offer universal mounting...

Worm Gear Motors/Speed Reducers offer leak-free operation.

UNIBLOC Worm Gear Drives operate at up to 92% efficiency, and offer torque capacity up to 2,690 lb in. Power ranges from 0.1 to 6.3 hp, with output speeds from 0.2 to 350 rpm. Gear ratios range from 5:1 to 100:1 for single worm, 50:1 to 1,000:1 for helical worm, and 150:1 to 10,000:1 for double worm configurations. Drives have 1-piece housing, oversized bearings, 2-bearing supported input shaft,...

Metal Finishing Selection Guide

This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.

Gearbox offers power capacities up to 4 kW.

Series e.JW is available in 10 sizes with gear ratios from 5:1 to 100:1, and is suitable for use with IEC and NEMA motors. Double reduction units provide option of 4000:1 ratio. Mounting surfaces are incorporated on all sides of gear case. Hollowed output shaft allows direct mounting with option of plug-in single or double extension output shafts. Sizes 30-60 have 1-piece aluminum gear case and...

Miniature Gearhead provides zero backlash.

CSF-1U size 5 precision gearhead delivers 3 arc-min positional accuracy in package that measures 20 x 20 x 37 mm. Product has rated torque of 5 lb-in. and maximum torque of 24 lb-in. Gearhead has both input shaft and output shaft for coupling. Unit is available in 30, 50, and 100:1 gear ratios.

Gearheads are suitable for powering robotic arm elbows.

Type BDB gearhead substitutes rotating flange for output shaft, omitting torsional deflection. Maximum backlash offered in BDB is 5, 3, or 1 arc-min. Pancake style gearhead maximizes transmittable torque in short length. BDB series also includes hypertorque versions in various ratios from 3-110. Product family is offered in 7 diameters from 2.5-11.25 in. with torque ratings to 68,000 lb-in....

Gear Drives suit low noise applications.

Zero-Max Crown gear drives provide directional motion change in power transmission systems. Sealed from contaminants, products offer class 10, hardened spiral drive bevel gears permanently mounted to shafts with locking pins. Equipped with non-magnetic, stainless steel shafts, right angle drives are available in 2- and 3-way models with 1:1 and 2:1 speed ratios. Internal gears stay permanently...

Speed Reducers deliver up to 6,800 lb-in. torque.

DODGEÃ-® TIGEAR-2(TM) single reduction, right angle worm speed reducers have totally enclosed, ventless sealing system that provides leak-free performance. Factory-filled synthetic lubricant accommodates range of operating temperatures. Tapered adapter bushing system virtually eliminates fretting corrosion on hollow shaft applications. Locking nut creates positive means for easy removal. Ten...

Planetary Gearhead has backlash of less than 1 arc-min.

Size 14 HPG Harmonic PlanetaryÃ-® Gearhead maintains backlash level of less than 1 arc-min for life of gearhead. It measures 85 mm long, with 60 mm square mounting flange. Rated torque is 110 lb-in. and maximum torque is 500 lb-in. Gear ratios range from 5 to 45:1. Applications include automation equipment, semiconductor equipment, and machine tools.

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.