New Gearheads and Gearboxes Products

Planetary Gearheads offer steel gears hardened to HRC 60.

NemaTRUE(TM) Planetary Gearheads include 60, 90, and 115 mm frame sizes. RediMount(TM) compliant, 2 front face options provide drop-in replacement for competitive gearheads, parallel-shaft spur gearheads, and similar reducers. Features include 13 arc-minute maximum backlash, ratios from 3:1 to 100:1 in all sizes, and anodized aluminum housing. Peak torque is rated to 1600 in/lbs, and peak radial...

Planetary Gearheads can be mounted to any motor.

UltraTRUE(TM) Planetary Gearheads, available in 90 and 115 mm sizes, are offered as in-line or right angle models. Features include 4-arc-minute backlash and crowned helical carburized steel gears hardened to HRC 60 (min.) and flank-finished after heat treating. Gearheads offer ratios from 1:1 to 100:1, peak torque from 1700 to 5300 in-lb, and peak radial load from 1500 to 2500 lbs. UltraTRUE...

Gearmotor produces up to 1050 lb-in. torque.

Model 42A-CG has 42A DC motor with Class F insulation on armature windings to withstand high operating temperatures. Synthetic grease permanently lubricates 3-stage gearing cluster of selectively hardened helical gears. Unvented gear reducer mounts in virtually any position, by integral face-mounting flange, with no lubricant leakage. Keyed, 1 1/8 in. diameter driveshaft delivers output torque to...

Servo Gearhead has compact right angle design.

V-Drive series right angle gearheads for servo motor applications are available in 4 frame sizes with continuous output torque ratings of 39 to 1072 Nm, ratios from 4:1 to 40:1, and 6 different output styles. Outputs include flange mount output, hollow shaft smooth, hollow shaft keyed, shaft mount smooth, shaft mount keyed, and spline shaft option for rack and pinion applications. Drive comes...

Medical Sealing Solutions: Protecting Devices & Equipment from Contamination

This white paper provides an in depth look into medical sealing solutions for protecting devices & equipment from contamination.

Gearmotors now come in smaller sizes.

New models in Clincher(TM) line of parallel shaft-mount gearmotors and speed reducers include: SK0182NB with gear ratios from 4.24:1 to 81.0:1, output speeds to 413 rpm and torque up to 1,027 lb-in.; SK0282NB with ratio from 4.03:1 to 139.0:1, output speeds to 434 rpm and torque to 1,443 lb-in.; and SK1382NB with ratios from 16.28:1 to over 381.0:1, output speeds to 107 rpm and torque to 3,275...

Gearheads have no backlash.

Lightweight PSA-G harmonic drive gearheads provide zero-backlash speed reduction for accurate angular positioning. Input-to-output gear ratios from 50:1 to 100:1 are available. They handle high axial and overhung loads, making them suitable for automation applications such as robotics and handling small components in assembly process. Maximum radial shaft loading is up to 115 lb. Gearheads are...

Speed Reducers provide high torque in small size.

HHB Series has crossed helical gears and HWB Series uses worm and wheel gear. Both single reduction models are available with ratios from 1:1 to 60:1 and torque outputs up to 77 lb-in. All accommodate inch or metric bores via interchangeable shafting. Backlash is as low as 45 min. in some models. Input speeds as high as 6,000 rpm can be accommodated. Right angle input drive to output takeoffs are...

Planetary Gearhead eliminates backlash creep.

Harmonic Planetary(R) HPG Series incorporates ring gear design that reduces backlash to less than 1 arc-min for life of gearhead. Unit is available in both flange output and shaft output configurations. Flange is supported by cross roller bearing, which provides low run-out and high concentricity. Applications include packaging, automation, and machine tools.

Variable Speed Drive controls 2 to 4 pump systems.

PumpSmart Model PS 200 microprocessor based, variable speed drive is programmed specifically for centrifugal pumps up to 700 HP. Control of process parameters is obtained by continuous monitoring and reaction to both pump conditions and system demands. Pump output is matched to exact flow and head required by process. PS 200 protects pump from dry running, low suction, cavitation, dead heading...

Speed Reducers withstand corrosive environments.

All-Stainless Steel Speed Reducers, with horsepower ranges through 5 HP, are available in frame sizes 918, 921, and 926 with quill-type 56C, 140TC, and 180TC NEMA C-face inputs. Construction consists of 304 cast stainless steel housings, covers, and shafts; stainless steel hardware; O-ring sealed C-face; and Mobile SHC 634 synthetic lubrication. Pressure compensation chamber prevents internal...

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.