Gearheads and Gearboxes

Designatronics, Inc. to Exhibit Mechanical Components and Motion Control Assemblies at AUVSI Unmanned Systems 2015
Miscellaneous Controls

Designatronics, Inc. to Exhibit Mechanical Components and Motion Control Assemblies at AUVSI Unmanned Systems 2015

New Hyde Park, NYÂ- – Designatronics, a leader in comprehensive mechanical solutions for critical motion control applications will be exhibiting at AUVSI Unmanned Systems 2015, May 5-7, 2015 in Atlanta, GA. Located in booth 1249, Designatronics will be showing a variety of custom parts, standard components and assemblies used in unmanned systems on land, sea and air. Examples of precision...

Read More »
Miniature Gear Drive is rated for 1/8 hp at 1,800 rpm.
Gearheads and Gearboxes

Miniature Gear Drive is rated for 1/8 hp at 1,800 rpm.

Measuring 1.25 in.Â-³, Miniature RA-300 Gear Drive has 0.250 in. diameter single input shaft, and single or double output shaft mounted in radial ball bearings. Unit is constructed with machined aluminum housing and steel case hardened helical gears in 1:1 and 2:1 ratios. Weighing just 6.1 oz, RA-300 provides output torque of 4.4 lb-in. (1:1 ratio) and 8.8 lb-in. (2:1 ratio).

Read More »
EXSYS to Showcase Toolholding and Gearbox Solutions at WMTS
Machine Spindles

EXSYS to Showcase Toolholding and Gearbox Solutions at WMTS

SAN ANTONIO, Fla. –Â- At Western Canada’s largest manufacturing technology event on June 15-17, EXSYS Tool, Inc. will feature a wide range of innovative manufacturing technologies from EPPINGER. On display at the Edmonton EXPO Centre in booth 702 for the Western Manufacturing Technology Show (WMTS) will be the Compacto™ C3, C4, C5 and C6 base holder, a full range of gearboxes, and the...

Read More »
Planetary Gearboxes serve precision motion-control applications.
Gearheads and Gearboxes

Planetary Gearboxes serve precision motion-control applications.

Models PLG24, PLG42K, PLG42S, PLG52, and PLG63 are available with brush and brushless DC motors, come in diameters from 24–63 mm, and offer output torqueÂ- to 74 lb ft. Reduction ratios range from 4:1 to 710:1, with >10 standard ratios available in each size, and typical construction includes gears and ball bearings made of steel or engineered polymer. OEMs can specify custom output-shaft...

Read More »
Regal Introduces Turnkey Retrofits of Live-roller Conveyor for Energy Efficient, Low-maintenance Performance
Powered Roller Conveyors

Regal Introduces Turnkey Retrofits of Live-roller Conveyor for Energy Efficient, Low-maintenance Performance

PROMAT Show News Regal Booth No. 968 Retrofits bring safety and sustainability advantages with new plastic chain or belt, premium-efficiency reducers, and long-lived, sealed bearings. Conveyor surfaces engineered for bottles, cartons, cases, people – even cars. FLORENCE, KY Â- – Regal Power Transmission Solutions is introducing at Promat a new turnkey retrofit program that transforms...

Read More »
Right-Angle Planetary Gearbox serves dynamic applications.
Gearheads and Gearboxes

Right-Angle Planetary Gearbox serves dynamic applications.

Offered in 5 sizes (060, 070, 090, 130, and 160), precision gearboxes of TQK series offers nominal torque from 30–800 Nm and ratios from 6–200 due to design based on one and two reduction sizes. Housing and mono-block planetary carrier maximize torsional stiffness, while planetary full-needle roller bearings allow optimal torque output. Along with standard and reduced backlash lower than 4...

Read More »
Transmissions

Oerlikon Graziano Recognised for Supplier Excellence by John Deere

Rivoli (Italy) – Oerlikon Drive Systems, with its brand Oerlikon Graziano, has received outstanding recognition under John Deere's Achieving Excellence (AE) supplier performance process. Following measurement by John Deere in the areas of quality, delivery, wavelength, technical support and cost management, Oerlikon Graziano was awarded Key Supplier status from the company's...

Read More »
Regal Keeps Rock Rolling with Aggregate-duty Bearings and Gear Reducers Exhibited at AGG1
Ball Bearings

Regal Keeps Rock Rolling with Aggregate-duty Bearings and Gear Reducers Exhibited at AGG1

Paver bearings for asphalt machinery displayed, along with wide range of gear reducers and life-cycle support program. Harsh-environment demonstration submerges operating products in sand. FLORENCE, KY – Regal® Power Transmission Solutions keeps rock rolling with its wide range of aggregate-duty bearings, gear reducers and life-cycle support services demonstrated at AGG1, booth 2010....

Read More »

All Topics