Tube Fittings work in pneumatic and water circuits.
All-metal WeldFit fittings help reduce assembly times and provide quick disconnection to enable re-tubing of system if it needs to be changed. Nickel-plated products feature silicone free O-rings and provide system protection from weld spatter. Rated for operating temperatures from -20 to 160Ã-
Read More »Brass Hose Fittings withstand corrosive environments.
Providing crimp-able, permanent connection, Series 26 all-brass, one-piece fittings exhibit corrosion resistance that withstands 1,200 hr of sea salt spray with no indication of rust. Products, available in multiple configurations, are offered as alternatives to 2-piece, stainless steel, field-attachable fittings. Sizes range from Ã-¼-Ã-¾ in.
Read More »Test Point Fittings monitor and control pressure.
Test point fittings, designed to test hydraulic systems at working pressures, allow for quick connections to monitor and control pressure, vent system, or draw samples. Connection is leak-proof before ball check is open in order to minimize contamination of hydraulic system. Self-locking metal cap further protects system. They are suited for use with hydraulic oils and other mineral-based fluids...
Read More »Fittings and Conduit withstand extreme temperatures.
High/Low Temperature Insulated Liquidtight System is rated from -60 to +150?C. HT Fittings feature double beveled sealing ring with 5 sealing mechanisms for true liquid-tight seal. Infinitely adjustable Revolver? Grounding Fitting makes tightening easy in any situation. ATX Flexible Metal Conduit features standard core, thermoplastic rubber jacket, and flammability rating of UL 94-HB. Fittings...
Read More »FRP Advantages for Utility Infrastructure
Our eBook, FRP Advantages for Utility Infrastructure, outlines the advantages and applications of FRP for utility structures.
Read More »Fittings connect tubes to pneumatic components.
Pneufit C Series push-to-connect fittings covers tube sizes from 4-16 mm and 5/32 to 12 in. Able to grip polyurethane and nylon tube, components feature recessed captive O-rings on parallel threads and pre-applied thread sealant on all taper threads. Pneufit M fittings, suited for applications where space is limited, offer tube sizes of 3, 4, or 6 mm with M3 to 1/8 in. ISO R threads. Inch tubes...
Read More »NPT Fittings are rated for 10,000 and 15,000 psi service.
High-pressure couplings and adapters, with NPT threaded connections, feature 316 cold-worked stainless steel construction. Straight couplings are available in 6 different connection sizes from 1/8-1 in. Offerings include NPT reducer couplings, male to male NPT adapters with connection sizes from 1/8--½ in., and female-to-male NPT adapters.
Read More »Conduit and Fittings withstand wide temperature range.
LiquatiteÃ-® Type ATX flexible electrical conduit, used with Thomas and Betts 5300 series Type HT Connectors, features outer jacket that is suited to extreme temperature conditions. Product remains flexible in temperatures from -60 to +150Ã-ºC, intermitting to 165Ã-ºC, and carries flammability rating of UL 94-HB. Available in 3/8-4 in. trade sizes, conduit utilizes flexibility of LT...
Read More »Pipe Fittings suit guardrails, staircases, and balustrades.
Kee KlampÃ-® malleable, cast-iron slip-on pipe fittings feature case hardened set screws and are galvanized at 2 oz per ftÃ-². Model 55 Obtuse Angle Elbow is used as alternate to bending or when junction between sloping pipe and end post is required. Fitting allows for angling of pipe from 110-178Ã-
Read More »Tubing and Accessories have 1/32 in OD.
Tubing includes PEEK(TM), PEEKsil(TM), TeflonÃ-® FEP, and 316 Stainless Steel. Company's 6-32 Micro Fingertights or 6-40 threaded fittings, compatible with Lee Co. 062 MINSTAC and Valco Nanovolume(TM), are suited for direct connections with no sleeves needed. True Zero Dead Volume MicroTightÃ-® Union and Mini MicroFilters have void volume as low as 22 nL.
Read More »Micro Fittings and Valves suit high-purity industries.
Made of 316L stainless steel, Ã-½ and Ã-¾ in. micro fittings and valves are available with 3 styles of clamps and various ferrule configurations. Adapters may be used with hose, weld, clamp, or pipe type connections. Elbows are offered in 45Ã-
Read More »Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »