New Fittings Products

Flare Fitting is available in various configurations.

Triple-Lok 2 incorporates precision-engineered O-ring groove that provides maximum sealing performance without weakening or compromising fitting nose. Groove prevents O-ring overfill and pinching and accepts standard O-rings in most sizes. Soft-seal, stainless steel, 37Ã-

Pipe Fittings are made of stainless steel.

Available in threaded or unthreaded styles made from 304 or 316 stainless steel, fittings can be used for processing, transporting, or storing of fluids, gasses, and slurries. Stainless steel prevents contamination, withstands elevated temperatures, and resists corroding. Products are offered as elbows, tees, crosses, couplings, plugs, caps, cut pipe, valves, pipe nipples, and flanges.

Pipe Fittings can be used to construct tubular structures.

Constructed of Aluminum Silicon Magnesium, corrosion-resistant Kee LiteÃ-® slip-on structural pipe fittings allow flat panels to be connected to tubular pipe structures. Fittings are available in sizes to fit 1 Ã-¼ and 1 Ã-½ in. standard pipe. Both LM51, male double swivel socket member, and LM52, male corner swivel socket member, require no welding, threading, or drilling to install....

Pipe Fittings extend structures without dismantling.

Hinge and Pin slip-on pipe fittings close around Size 8 pipe and are secured in place with locking pin and case hardened set screws. Model A12 Split 45-° Single Socket Tee connects 2 sections of pipe at 45-° angle. Model A35 Split Three Socket Cross ties upright with horizontal pipes in 3 directions, all at 90-° to upright. Model A40 Split Four Socket Cross ties center upright with horizontal...

NVH Materials Guide

Noise, Vibration, and Harshness (NVH) refers to the study of noise and vibration for the purpose of modifying equipment for quieter, safer operation.

Conduit Fittings provide environmental protection.

Metallic Liquidtight Conduit Fittings, offered in Ã-½ and Ã-¾ in. straight body design, feature UL Type 3R, 12, 13, and 4 environmental enclosure ratings. They are 3rd party certified to provide protection from windblown dust and rain, splashing water, hose-directed water, and damage from external ice formation.

Vacuum Suction Cup Fittings provide tight seals.

Captured O-Ring Barbed Fittings combine mechanical fit of metal-to-metal connections with static sealing qualities of O-rings, creating leak-proof seals. Designed to screw into suspensions and retain their position, even under constant vibration, units have machined grooves for O-ring that will not break and flare out when tightened. Units are available in 10-32 UNF through 1/8 in. thread sizes...

Push-In Fittings suit compressed air and vacuum applications.

BasicLine Fittings consist of Type QB inch and Type QS-H metric hybrid versions. Available in straight, elbow, and tee configurations, each fitting includes stainless steel retaining ring, which holds tubing securely without damaging surface. Vibration and pressure surges are safely absorbed and tubing can easily be detached by pressing down release ring. NBR rubber-sealing ring guarantees tight...

Fittings facilitate sealing and draining vertical conduit.

Suited for hazardous locations, Type EYD Vertical Drain/Seal Fittings are threaded for rigid conduit or IMC. Available in sizes from -½-4 in., fittings are precision cast in malleable iron and eliminate need for rubber hose to create drain path through sealing compound. Fittings minimize passage of vapors and gases and prevent passage of flames from one portion of conduit system to another,...

Couplings provide up to 8 in. of movement in conduit runs.

Series XJ Expansion Couplings have weather-tight joints as well as metallic packing ring to assure metal-to-metal continuity. They are UL listed for indoor applications without bonding jumpers, and for outdoor use with bonding jumpers. Units feature malleable iron end-fittings and hardened steel body. Four inch movement couplings are offered in Ã-½ to 5 in. trade sizes, while 8 in. movement...

Aluminum Fittings fit railings and pipe structures.

Kee LiteÃ-® fittings are constructed of high-grade aluminum silicon magnesium, making them strong, lightweight, and corrosion-resistant. Fittings have contoured design, hidden set screws, and bright finish suitable for railings, lighting grids, display fixtures, playground equipment, racks and shelving, guard rails, and other tubular pipe structures. For use with 1Ã-¼ and 1Ã-½ in....

Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors

Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.