Fittings

Pipe Fitting serves as socket tee and crossover.

Pipe Fitting serves as socket tee and crossover.

Constructed of malleable iron and treated for corrosion resistance, slip-on EF43G is used to build racks and other tubular pipe structures. It joins horizontal rails to upright, leaving protruded socket to take horizontal tie, perpendicular to other rails, across section. Product, suited for building shelved racks or pallet racks, is available to fit following pipe sizes: Easyfit Size 25 (1 in.),...

Read More »
Tube Fittings provide leak-proof and torque-free seals.

Tube Fittings provide leak-proof and torque-free seals.

Instrumentation-grade Compression Tube Fittings consist of nut, back ferrule, front ferrule, and body that when installed become 5-piece connection providing solid, leak-free joint. Two ferrules are tightly swaged around tube and lack of initial strain on tubing ensures no tubing wall damage. Leaks are prevented because there is axial movement along tube instead of rotary motion creating joint....

Read More »
Threaded Compression Fittings fit -¼ in. OD tubing.

Threaded Compression Fittings fit -¼ in. OD tubing.

Offered in straight and elbow configurations, 10-32 threaded compression fittings incorporate O-ring seals in variety of elastomers to provide leak-free installation. Designed with Â-½ in. hexagonal body, straight compression fittings MCB-14 (brass) and MCB-14-303 (303 SS) are 53/64 in. long. Elbow compression fittings MCBL-14 (brass) and MCBL-14-303 (303 SS) are 59/64 in. long and have...

Read More »
Pneumatic Fittings are offered in food grade versions.

Pneumatic Fittings are offered in food grade versions.

Offered in over 45 different shapes, Pneufit D series push-in fittings are suitable for compressed air applications and approved by FDA, WRAS, SK Zert, and NSF-51 for use in food processing. Parts incorporate integral stainless steel grab rings, which offer secure assembly for Nylon PU and PE tubing. Tube sizes are available from 4-12 mm and 5/32-Â-½ in. Pneufit D can also be specified with...

Read More »
Base Mount Structural Pipe Fittings accommodate toe boards.

Base Mount Structural Pipe Fittings accommodate toe boards.

Suited for indoor or outdoor use, corrosion-resistant Kee KlampÂ-® 69-8 malleable cast iron and Kee LiteÂ-® L69-8 aluminum slip-on fittings fit 1Â-½ in. dia pipe. They can be used to construct industrial, commercial, and residential guard railing, as well as other pipe-fitted structures. Kee Klamp fittings are galvanized to ISO 1461 ISO 9001:2000 manufacturing quality standard, while...

Read More »
Quick Disconnect Fitting simplifies tubing connections.

Quick Disconnect Fitting simplifies tubing connections.

Series F-4150, 10-32 UNF male-threaded Quick Disconnect is available in 3 barb configurations: straight, elbow, and tee. Depressing latching pushbutton enables removal of barb, and re-insertion of barb locks it into position. Barbs can be provided for 1/16 in., 1/8 in., or .170 ID tubing. Design allows fitting to swivel 360Â-º.

Read More »
Fittings offer single-barb design.

Fittings offer single-barb design.

Pneu-Edge(TM) fittings feature sharp, single-barb design that provides tight grip and seal. Precision machined barbs ensure permanent tubing installation without need for clamps. Straight connectors, tees, elbows, crosses, and couplings are available to accommodate various fluid handling circuits.

Read More »
Quick Connection System eliminates threaded coupling.

Quick Connection System eliminates threaded coupling.

Quick Connection System, Model M12-QCS, only requires push mating to secure and seal connector. With push mating, connection is made, locking is guaranteed, and features of IP 65/67 are fulfilled. System is vibration-proof and backwards compatible with other M12 technologies.

Read More »

M3 Threaded Compression Fittings have compact design.

Ultra-miniature M3CB-1016-303 and M3CB-1018-2-303, available for 1/16 and 1/8 in. OD tube sizes respectively, are constructed of 303 and 316 stainless steel and employ Buna-N, fluorocarbon, EPDM, and silicone seals. Model M3CB-1016-303 has 8.4 m installed height and 5 mm hex size, while M3CB-1018-2-303 features 11.9 mm height and 6 mm hex size. Both fittings feature 0-3,000 psig inlet pressure...

Read More »
Heat Trap Fittings provide quiet operation.

Heat Trap Fittings provide quiet operation.

Hush(TM) products feature thermoplastic ball with elongated tail designed to reduce rattle in water heaters. During flow of water, tail is forced to interior surface of fitting, reducing possibility of noise. In tests, decibel rating of ~55 dB remains unchanged with water flow rates from 1-9 gpm. Featuring steel-to-plastic construction that creates non-corrosive waterway lining, self-cleaning...

Read More »

All Topics