Fittings

Restraints

Branch Line Restraint System increases reliability, safety.

Offering adaptable bracing solution, B-Line™ series TOLCO™ Branch Line Restraint (BLR) system helps prevent movement and damage of fire sprinkler branch lines during earthquakes. TOLCO BLR structural and pipe attachments are UL®-listed and FM-approved for both steel and plastic CPVC sprinkler systems. Snap-on design allows one-handed installation and is sturdy enough to hold load....

Read More »
Stainless Steel Fittings connect pneumatic components, piping.
Electrical Connectors

Stainless Steel Fittings connect pneumatic components, piping.

Constructed of 316 stainless steel, Push-Quick fittings provideÂ- push-pull method of connecting pneumatic components to each other and system piping. Design allows full flow through hose/tubing ID without any smaller orifice required. Intended for use with flexible hose and stiff tubing made of nylon, polyurethane, polyethylene or polypropylene, these corrosion- and...

Read More »
Fittings

Tee and Elbow Fittings hold solar pipe rack secure. .

Comprising 5EX-8 tee and 5EXT-8 tee for 1 Â-½ in. IPS pipe and 5X-9 tee and 17X-9 adjustable tee/elbow for 2 in. IPS pipe, Speed-Rail® Fittings are used for installation of solar racking systems in areas that experience extreme wind. Slip-on pipe fittings feature 2 set screws in vertical barrel, set at 90° to one another, producing maximum pullout resistance. Made of 535.0...

Read More »
Guardrails and Railings

Hollaender's® Adjustable Handrail Fittings Chosen for North Sea Based Oil Production Platform

CINCINNATI, OHÂ- – Aluminum Offshore Pte Ltd is a Singapore based manufacturer of helidecks and other structures used by the off shore petroleum industry. The company recently chose Hollaender Manufacturing to supply the aluminum adjustable fittings it needed to complete a new railing system to be installed at a structure in Norway’s North Sea. Aluminum Offshore needed an elbow fitting...

Read More »
IP67 Bulkhead Housing Sets New Connector Baseline.
Fittings

IP67 Bulkhead Housing Sets New Connector Baseline.

In locked state, Han® B IP67 bulkhead mounted housings provide IP66 and IP67 protection to allow temporary, full immersion in water. Flange protects gasket seal, preventing water from penetrating connector, while circumferential collar prevents seal from sliding inwards or outwards and thereby provides additional protection against water ingress. Available inÂ- 6B, 10B, 16B, and 24B...

Read More »
Strain Relief Fittings meet pullout requirements without external clamping.
Strain Reliefs

Strain Relief Fittings meet pullout requirements without external clamping.

Kopex-Ex™ ISR™ industrial strain-relief fittings are intended for use with tray cable, portable cords, and other unarmored cables in industrial applications, including drill rigs in oil and gas processing industry. While facilitating and accelerating installation, feature integral clamping mechanism enables full compliance with IEC pullout requirements without external clamping. Products...

Read More »
Luer Lock to Barb Connectors feature single-use design.
Fittings

Luer Lock to Barb Connectors feature single-use design.

Offered in natural polypropylene or clear polycarbonate, Winged Female Luer Lock to Barb Connectors mate to any standard male luer. Barbs are available in 3/32 in. OD and 1/8 in. OD sizes. EtO and Gamma sterilization compatible, single-use connectors feature ergonomic wing design that provides optimized grip, facilitating connection and disconnection.

Read More »
Ball Valves

SEMCOR's Fluid Handling Division

We a wide range of products to allow us to help you find a variety of solutions forÂ-  your fluid control problems. Many of these products are specially engineered for resisting corrosion from harsh chemicals. Resistoflex introduced lined pipe and fittings to provide the ultimate in rigid  piping for high temperature applications and corrosion resistance. With the acquisition of Dow...

Read More »
EMT to FMC Transition Couplings help contractors conserve time.
Couplings (Fittings)

EMT to FMC Transition Couplings help contractors conserve time.

Available in Â-½–2 in. in die cast zinc and 2 ½–4 in. in zinc plated steel, Mighty-Merge® EMT to FMC/Greenfield transition couplings provide dimensional flexibility when transitioning between raceways. Design negates need for contractors to assemble multiple fittings or mount box to transition between raceways. While EMT to FMC fittings (½–2 in.) are cULus...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers