New Fittings Products

Hydraulic Fittings fit international threads.

International fittings are suitable for hydraulic applications where BSPP, BSPT (British), JIS, Komatsu (Japanese) and DIN (German) threads are used. They meet J.I.C., S.A.E. and international standards, are provided in more than 60 configurations, and are available in custom sizes and styles.

Liquidtight Fittings suit space-sensitive environments.

Liquidtight/raintight/oiltight 4Q Connectors offer slim profile for tight turning radius. They are available in trade sizes of 3/8 to 6 in. with straight, 45 deg, and 90 deg insulated or non-insulated body design. Body and nut are made of zinc-plated malleable iron. Extra long hub enables use of bushings to protect conductors from abrasion. Sealing gasket and locknut are included.

Threaded Fittings are available in various configurations.

Ultra-miniature M3 threaded fittings suit fluid power applications where space is critical. Configurations include straight barbed tube fittings, elbows, tees, plugs, and compression fittings. Available in brass and 303 Stainless Steel, fittings employ captured O-ring face seal technology for leak-tight connections, and can be ordered with Buna-N, EPDM, Fluorocarbon, or Silicone O-rings.

Brass Tube Fittings differentiate between English and Metric.

To distinguish between fittings made to English and Metric standards, length and diameter of wrenchable hex section of fittings are different. On metric types it is short axially and large across flats. On English types it is long axially and small across flats. Fittings include metric sizes that join 4 to 12 mm OD tubing with 2 to 8 BSP threads and English sizes that join 1/8 to 1/2 in. tubing...

Reshoring in Metal Stamping

This white paper provides an overview into the reshoring of metal stamping and other manufacturing processes.

Pneumatic Fittings simplify motion control.

Blocking fittings mount on air cylinder port and use independent pilot air signal to block movement of piston rod at selected positions. Slow Start fittings control speed at which cylinders recover position. Flow Control Regulators are unidirectional and adjust speed of cylinder rod by controlling inlet or outlet flow. Inline Flow Controls mount anywhere and can be ganged together. Right Angle...

Fittings have working pressure up to 300 psi.

Prestolok(R) 1-piece brass fittings accept polyethylene, nylon, or soft metal tubing. Elastic metal grab ring grips tubing securely, and nitrile O-ring forms positive seal. Once in fitting, tubing can rotate freely, even under pressure. Swivels on male pipe threaded shapes permit precise positioning and installation in tight spaces.

Fittings provide positive grip on all tubing.

Microlok(TM) Miniature Push-to-Connect fittings are available in male hex and round body styles in range of straight and shaped configurations. Straight fittings have nickel-plated forged brass body. Shaped fittings feature composite body with nickel-plated components. Microlok(TM) fittings are available with 1/16, 1/8, 10-32, and 1/4 in. pipe thread ends, and accept 1/8, 5/32, and 1/4 in. tubing.

Fittings eliminate leaks in hydraulic systems.

O-ring face-seal fittings, available in 23 configurations and 35 different size combinations, permit operating pressures as high as 6,000 psi. They can be connected to range of tubing grades by silver brazing. Fittings are suitable for sub-zero to high-temperature applications, and are resistant to vibration and shock conditions. They meet or exceed design and performance requirements of SAE...

Sealing Fittings allow long conduit runs.

EYAX expanded fill sealing fittings allow 6 wires, resulting in 40% fill, and makes possible uninterrupted runs in IMC or rigid conduit systems. They eliminate need for oversized fittings and reducing bushings. Fittings have smooth integral hub bushings to prevent insulation damage and enlarged access opening that facilitates faster, easier, and more accurate wire separation. Fittings are UL(R)...

Thread ID Kit checks hydraulic fittings.

MIK-1/4403-B1 kit helps user identify metric, BSP, SAE and NPT threads and end types found on hydraulic fittings. It includes instructions for identifying thread pitch, size and type, as well as tube and port end connection style. Kit includes 16 thread pitch steel gauges for metric, BSPP/BSPT, UN/UNF, and NPT; calipers for measuring up to 3 in.; profiles for NPT and BSPP/BSPT threads; and nose...

What Can Test Devices Spin for You?

Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.