End Mills

End Mills

Chipbreakers handle exotics and stainless steel alloys.

General-purpose EEG, intendedÂ- for roughing applications, features ball-shaped projection breakers. Two-step cutting edge at front reduces crater wear and produces optimal surface finish when machining exotics and stainless steel alloys. Wear resistance and chip control help reduce lead-time and increase productivity. Also available, EEF is designed for chip control during...

Read More »
Seco to Showcase Innovative Cutting Solutions for Composites at JEC Americas Show
End Mills

Seco to Showcase Innovative Cutting Solutions for Composites at JEC Americas Show

TROY, Mich. –Â- At the JEC Americas 2013 Composites Show in booth E 31, Seco Tools will showcase innovative CVD diamond-coated and PCD cutting tool solutions with high wear resistance that increase productivity and improve process security when machining challenging composite materials. Among the solutions Seco will have on display include the new comprehensive Jabro JC800 Series of CVD...

Read More »
Walter to Feature Advanced Cutting Tool Technologies at CMTS '13
End Mills

Walter to Feature Advanced Cutting Tool Technologies at CMTS '13

Waukesha, WI – Walter, a leading cutting tool manufacturer, will showcase several new cutting tool technologies in Booth 4204, Hall 2 at the Canadian Manufacturing Technology Show, The show will run from September 30 to October 3, 2013 at The International Center in Mississauga, Ontario. The display will feature products such as Walter Blaxx™ indexable milling cutters, Tiger•tec®...

Read More »
Compression End Mill supports composite machining.
End Mills

Compression End Mill supports composite machining.

Combining positive and negative helix to compress top and bottom of component edge, CoroMill® Plura minimizes potential for delamination, which is common when machining carbon-fiber reinforced polymers. Tool supports edge milling applications on workpieces with minimum thickness of 6 mm. Offered in diameters from 0.24-0.63 in. with lengths from 2.99-3.94 in., tool features 6 effective...

Read More »
Solid Ceramic End Mill comes in 4- or 6-fluted versions.
End Mills

Solid Ceramic End Mill comes in 4- or 6-fluted versions.

Beyond KYS40™-grade solid ceramic endmill is capable of roughing at cutting speeds up to 3,300 sfm and machining high-strength nickel-based alloys. Enlarged core design optimizes tool rigidity and minimizes deflection at high cutting speeds. Also, unit features 40° helix angle for maximized shearing and chip evacuation. Product is available in 6-fluted version for face milling and profiling...

Read More »
End Mills perform both roughing and finishing.
End Mills

End Mills perform both roughing and finishing.

AvailableÂ- in full range of inch and metric sizes, TOP-Cut™ Carbide End Mills feature variable helix angles that eliminate harmonic oscillation to minimize vibrations and optimize surface quality. Carbide substrate, combined with micro-geometry and high heat-resistant TiALN coating, ensures process safety and extended tool life, even in most diverse materials. For maximum efficiency,...

Read More »
Seco Tools to Highlight Advanced Tooling at AmeriMold 2013
End Mills

Seco Tools to Highlight Advanced Tooling at AmeriMold 2013

TROY, Mich.– At AmeriMold 2013 in booth 135, Seco Tools will display its small-diameter Square 6™-04 shoulder milling cutter, High Feed 2 line of small diameter high-feed milling tools and its Double Octomill™ -05 face milling cutter for small machines. These recent tooling innovations significantly increase productivity and provide longer tool life for mold machining. Offered in diameters...

Read More »
Rough Face Milling Cutter features multi-edge design.
End Mills

Rough Face Milling Cutter features multi-edge design.

Available in 4-10 in. dia, CoroMill 357 is suitable for roughing and cubing in steel and cast ironÂ- on ISO 50 and larger machines. Double-sided, pentagonal inserts are housed in shim-protected tip seats, and cutter body has insert clamping system that facilitates and accelerates insert indexing. Taking depth of cut up to 0.394 in. with feed per tooth up to 0.0276 in./z, cutters feature...

Read More »
Cutters and Inserts feature fine pitch for smooth cutting.
End Mills

Cutters and Inserts feature fine pitch for smooth cutting.

Machined from double-hardened tool steel, 12 mm Cutter Bodies and Inserts are designed with fine pitch for accelerated feed rates and smooth cutting action that minimizes noise and pressure. End Mills come in cutting diameters from 0.625–1.500 in., while Shell mills, with varying pitch options, cut from 1.5–4 in. Helical roughing end mills are available in 1.0 and...

Read More »
Seco to Showcase Powerful Machining Solutions for Modern Materials at AeroDef
End Mills

Seco to Showcase Powerful Machining Solutions for Modern Materials at AeroDef

TROY, Mich. - At the AeroDef Manufacturing Conference and Exhibition, co-located with Composites Manufacturing 2013, taking place March 19 - 21 at the Long Beach Convention Center in California, Seco Tools will showcase several advanced tooling solutions for the efficient and precise milling and turning of difficult-to-machine aerospace materials in booth 132. Whether AeroDef attendees are...

Read More »

All Topics