End Mills

Aven Technik Tungsten Carbide Cutters
End Mills

Aven Technik Tungsten Carbide Cutters

Cut through the toughest wires with ease. Designed to cut through hard wires such as guide wires, stents, catheters, and single/multiple fillers. The tungsten carbide blades have a hardness rating of 80-85 HRC for exceptional durability. ESD-safe, ergonomic hand grips provide protection against static build up. Ultra-responsive dual leaf springs provide easy opening and closing for reduced hand...

Read More »
Jabro®-HFM End Mills are made of solid carbide material.
End Mills

Jabro®-HFM End Mills are made of solid carbide material.

Jabro®-HFM End Mills are available in HFM JHF181, Solid² JS564 and JS565 models. Designed in 2, 4 and 5-flute options with cutting diameter from 2 mm to 16 mm and 2 x D to 7 x D length range, HFM JHF181 are suitable for hardened steels and nickel-based alloys. Providing high radial engagement, high feeds and speeds for optimized roughing passes, Solid² JS564 and JS565 models come with 3 mm to...

Read More »
Emuge Circle Segment End Mills enable over 80% faster machining cycles.
End Mills

Emuge Circle Segment End Mills enable over 80% faster machining cycles.

Available in barrel, oval form, taper form and lens shape geometries made of solid-carbide, Emuge Circle Segment End Mills feature large cutting area radii and allow large axial depth of cutting in finishing and pre finishing operations. Featuring Specific CAM system software to support and compute geometries of end mills, oval and taper units are used in curved shapes, lens shape mills for...

Read More »
End Mills

The Ironmaster

Kennametal´s next generation face mill tackles the toughest cast iron applications with easeKennametal´s Mill 16 has a wedge-style clamping system, numbered pockets and inserts, and an open pocket design to increase chip flow in heavy roughing Iron is the most abundant element on earth by mass. For over twenty-five centuries it´s been used to plow fields, build bridges, cook food, and wage...

Read More »
KBDM PCD face milling system offers finishes of 2 to 3 ìm Ra.
End Mills

KBDM PCD face milling system offers finishes of 2 to 3 ìm Ra.

Using fine-pitch aluminum body with wedge-style clamps and adjustable pockets, KBDM PCD face milling system is stocked in standard sizes of 2.5 - 8.0 in. (63 - 200 mm). Designed for high-volume machining, unit enables initial cutting speed of 3280 ft/min (1000 m/min) and feedrates of .004 in. per tooth (0.01 mm). With small diamond grains, KD1400 offers excellent chipping resistance. Using large...

Read More »
Niagara Cutter Stabilizer 2.0 comes with advanced AlTiN coating.
End Mills

Niagara Cutter Stabilizer 2.0 comes with advanced AlTiN coating.

Offering smooth and silent operation, Niagara Cutter Stabilizer 2.0 is capable of handling twice the chip load capacity than previous models. Including ST440.2 HT series for ISO-M and ISO-S materials such as stainless steel, titanium and high-temp alloys and ST430.2 series are designed for steels, alloy steels, cast iron. Boasting of new geometry to boost performance, end mills are offered in...

Read More »
Stainless Steel Roughing Geometry increases productivity.
End Mills

Stainless Steel Roughing Geometry increases productivity.

RM5 provides guided twin-channel coolant, targeted at chip, to maximize cooling and promote tool life for machining ISO M stainless steels and ISO S high-temperature alloys. For added cutting efficacy, part uses Tiger·tec® Silver PVD Al2O3 cutting tool inserts in grades WSM10S, WSM20S, and WSM30S as well as Tiger·tec Silver CVD cutting tool material in WMP20S grade. Design of...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics