End Mills

Seco® to Spotlight Solutions for Composite Machining at THE BIG M(TM)
End Mills

Seco® to Spotlight Solutions for Composite Machining at THE BIG M(TM)

TROY, Mich. –Â- At THE BIG M manufacturing convergence event, taking place June 9 – 12 in Detroit, Mich., Seco Tools, LLC will showcase innovative milling and drilling tools and techniques that bring increased cutting performance to the machining of composite-based components in booth 330. Among the solutions Seco will have on display include the Jabro® JC800 series of...

Read More »
End Mills handle machining of hardened steels.
End Mills

End Mills handle machining of hardened steels.

Suitable for machining hardened steels up to 58–62 HRC, running wet or dry, Omega M726 End Mills featureÂ- 6 flutes, 50° helix angle, and AITiNX coating to protect cutting edges from heat generated in cutting zone. Omega M7 Series is available in sizes from 1/8–¾ in. and in variety of lengths with neck relief and corner radii as standard options. Sizes...

Read More »
Seco Canada Covers All Cutting Tool Bases at MMTS 2014
End Mills

Seco Canada Covers All Cutting Tool Bases at MMTS 2014

New Seco and Niagara milling, turning and holemaking products on display in booth 427 TROY, Mich.Â- – At MMTS 2014, May 12 – 14 at Place Bonaventure Montreal, Quebec, Seco Tools Canada will meet the increased productivity and tight tolerance demands of manufacturers across all industry segments by showcasing a broad selection of new milling, turning and holemaking solutions from its Seco...

Read More »
High Performance End Mill serves aluminum roughing applications.
End Mills

High Performance End Mill serves aluminum roughing applications.

Available in sizes from 3/16–Â-¾ in., Alumigator is designed for accelerated ramping into pockets at angles up to 45°. End mill, once at full depth of cut, will chew through material as aided by core and engineered cutting edges that maximize cutter strength. Combination of geometries produces short curled chip, which is evacuated at accelerated rates to help prevent double cutting...

Read More »
Solid Carbide Endmill combines performance, extended tool life.
End Mills

Solid Carbide Endmill combines performance, extended tool life.

Used on steel, stainless steel, cast iron, and super alloys, Prototyp Proto•max™TG (Tough Guys) is available in 2–25 mm dia variants with 3,Â- 4, or 5 cutting edges. Design promotes chip removal, rear cutting edge has reinforced core to promote stability, and carbide substrate provides toughness for counteracting vibration induced fractures to cutting edge....

Read More »
Solid Carbide Drill is designed for holemaking in aluminum.
End Mills

Solid Carbide Drill is designed for holemaking in aluminum.

Along with 135° drill point, HPS solid-carbide drill features Beyond™ KN15™ carbide grade with polished surface that reduces friction on flutes, margins, and cutting edges. This promotes chip evacuation, even in minimum-quantity lubrication (MQL) processes. While sharp cutting edges lower cutting forces and extend tool life, spiral flute design accelerates chip evacuation. Diameters...

Read More »
End Mills

Face Milling Platform addresses cast iron, steel challenges.

Featuring double-sided insert design withÂ- 8 cutting edges, KSSM8+™ maximizes metal-cutting performance in cast irons and steel workpieces. Respectively, IC10 and IC 12.7 sizes provide 0.354 and 0.236 in. depth of cut and lead angles of 88° and 87°; suitable applications include those where fixture limitations or part designs call for close to 90° shoulders....

Read More »
Medium Roughing Inserts cut stainless steels.
End Mills

Medium Roughing Inserts cut stainless steels.

Suitable for wide range of workpiece materials, but optimized for stainless steels, Beyond™ MR Inserts feature unique geometry that maximizes smooth cutting and chip flow. Geometry of chip step is designed in continuous curve so that alternating stresses are reduced and uniform chip forming occurs. High positive rake angle works with smoothly curved cutting edge to reduce cutting forces. In...

Read More »
WIDIA Vari Family of Tools Takes Efficiency to the Extreme
End Mills

WIDIA Vari Family of Tools Takes Efficiency to the Extreme

For milling, drilling, or tapping, VariMill™, VariDrill™, and VariTap™ deliver high performance and real economy. To address the unique needs of job shop customers and the distributors who serve them, the WIDIA VariMill™, VariDrill™, and VariTap™ are specifically engineered to be versatile, easy to choose, easy to use, and deliver superior results in a wide range of applications and...

Read More »
Solid Carbide Endmills offer fine balance and 5 ìm run-out.
End Mills

Solid Carbide Endmills offer fine balance and 5 ìm run-out.

Made from fine grain carbide, Power Mill PVD-coated endmills come in 2–20 mm cutting diameters and with 3, 4, and 5 cutting edges. Safe-Lock™ pull out protection system is available starting from 6 mm shank diameter, and all shanks are based on h5 tolerance. Cutting edge solutions include sharp, chamfer, and radius, and roughing geometry with cord profile is also available. For chatter-free,...

Read More »

All Topics