Electronic Sockets

Circuit Breaker Finder and Socket Tester locates AC circuits.
Electronic Sockets

Circuit Breaker Finder and Socket Tester locates AC circuits.

Digital Circuit Breaker Finder and Socket Tester locates correct circuit breaker or fuse supplying power to AC socket or lighting fixture without interrupting circuit. Product features auto-power off, low battery detection, and non-contact voltage sensor mode to sense voltage higher than 50 V. Socket Tester identifies common wiring faults by verifying wiring configuration. Wiring errors are...

Read More »
Electronic Sockets

Test Socket facilitates evaluation of BGA devices.

Able to be leveraged across multiple platforms, G80 Grypper(TM) accelerates engineering development and failure analysis/QA for 0.8 mm+ pitch BGA devices in ASIC, FPGA, and embedded markets. Contact design minimizes forces required to insert higher-ball-count BGA devices into device-footprint G80 socket. Use allows customers to evaluate, debug, and characterize chipsets in actual system...

Read More »
BGA Socket Adapter accepts Samsung MCP memory device.
Electronic Sockets

BGA Socket Adapter accepts Samsung MCP memory device.

Consisting of solder balls on bottom side and round pads on topside, Model SF-BGA199B-B-05 accommodates 0.65 mm pitch, 12 x 16 mm body, 18 x 22 array Samsung MCP KMYFE0C0CM-D300 memory ICs. If target circuit board already exists or mounting holes cannot be drilled into target board, then BGA SMT adapter can be used with Ironwood GHz socket. Constructed with high temperature FR-4, adapter assures...

Read More »
Electronic Sockets

BGA Adapters connect 0.50 mm devices to 1.00 mm boards.

Designed to adapt smaller pitch devices to larger footprints, Switch-A-Pitch Adapters eliminate need for laser-drilled microvias on motherboards while enabling use of standard line and trace spacing down to 0.003 in. Adapters have tops with BGA landing pads on 0.50 mm pitch and bottoms fitted with BGA balls on 1.00 mm pitch. Operating up to 221°F for FR4 or up to 266°F for lead-free,...

Read More »
Right Angle Sockets suit micro backplane applications.
Electronic Sockets

Right Angle Sockets suit micro backplane applications.

Right Angle SEARAY(TM) Open Pin Field Sockets (SEAF-RA Series) have .050 x .050 in. grid array for maximum grounding and routing flexibility and are optimized to reduce skew and impedance mismatch. They feature Edge Rate(TM) contacts, which are designed for optimal signal integrity, reduced broadside coupling and crosstalk, and high cycles. Sockets are available in 4-row (up to 200 contacts) and...

Read More »
Terminals/Sockets feature .8 mm pitch.
Electronic Sockets

Terminals/Sockets feature .8 mm pitch.

Edge Rate(TM) Right Angle Series ERM8-RA/ERF8-RA and Edge Mount Series ERM8-EM/ERF8-EM terminals and sockets offer up to 150 I/Os in single-ended or differential pair configurations, with choice of 10 to 75 positions/row. Suitable for rugged and harsh environments, strips are also offered with optional metal latching system.

Read More »
Vertical Socket Connector has 0.1 mm lead coplanarity.
Electronic Sockets

Vertical Socket Connector has 0.1 mm lead coplanarity.

RoHS-compliant, vertical surface-mount DDR2 DIMM socket connector, FCN-078J series uses precision stamping and molding technology to achieve 0.1 mm coplanarity before and after reflow. Available with footprint of 22.7 x 140 mm, 240-position unit has operating temperature range between -55 to +85°C, voltage rating of AC 25 V and maximum current rating of 0.5 A/contact. Suitable applications...

Read More »
IDC Socket and Plugs offer board to cable connections.
Electronic Sockets

IDC Socket and Plugs offer board to cable connections.

Featuring 0.100 in. contact centerline, SFH IDC Series Socket and SIP IDC Series DIP Plugs have current rating of 1 A/contact and are offered in 3/6 through 32/64 dual positions. Devices mass terminate single-layer, 0.050 in. 28 AWG flat ribbon cable in one step. Sockets are available with strain relief and polarizing keys to ensure proper mating alignment. Operating from -40 to +105°C,...

Read More »
Stamped Spring Pin Socket is suited for 0.5 mm pitch BGA.
Electronic Sockets

Stamped Spring Pin Socket is suited for 0.5 mm pitch BGA.

Designed for Burn-in and Test applications, SBT-BGA-7003 is stamped spring pin with 26 g actuation force per ball and cycle life of 100,000 insertions. Contactor has self inductance of 0.88 nH, insertion loss of less than 1 dB at 20 GHz, capacitance of 0.097 pF, and temperature range of -55 to +180°C. Socket also features floating guide for precise ball to pin alignment, while current...

Read More »
BGA SMT Adapters are available in many different pin counts.
Electronic Sockets

BGA SMT Adapters are available in many different pin counts.

Giga-snaP(TM) BGA SMT adapter pair consists of SF-BGA316C-B-62F female sockets with machined pins epoxy over-molded into assembly that matches male pin LS-BGA316C-61. Soldered to PCB using standard soldering methods without warping, SF-BGA316C-B-62F allows 0.8 mm pitch, 17 x 17 mm body, 20 x 20 array Analog Device ADSP-BF539/ADSP-BF539F ICs to be socketed and operate in demanding automotive...

Read More »

All Topics