Electronic Drivers

TRIAC-Dimmable LED Drivers deliver 15 W output.
Electronic Drivers

TRIAC-Dimmable LED Drivers deliver 15 W output.

Compatible with leading edge, trailing edge, and smart dimmer technologies, PDA015N Series provides flicker- and shimmer-free performance for residential LED fixtures, including indoor and outdoor downlights and area lights. Waterproof devices are available in 3 constant current outputs of 350, 700, and 1,000 mA.Â- Measuring 3.15 x 3.07 x 0.99 in., drivers operate using 108–132 Vac and...

Read More »
Electronic Drivers

Future Electronics Offers Micrel's MIC4606 Full Bridge MOSFET Driver

Pointe Claire, QuebecÂ- – Future Electronics, a global leading distributor of electronic components, has Micrel's MIC4606 85V full bridge MOSFET driver with adaptive dead time protection. The MIC4606 from Micrel is an 85V full bridge MOSFET driver that features adaptive dead time and shoot-through protection. It also offers a wide 5.5V to 16V operating supply range to maximize system...

Read More »
Electronic Drivers

LED Backlight Drivers feature step-down circuit.

Housed in 8-lead and 16-lead SOIC packages, respectively, single channel MAP3511 and dual channel MAP3512 target TV LED backlight and LED lighting applications. Both devices feature average-mode current control, programmable constant off-time, up to 3 V analog dimming input, and direct PWM dimming input. Operating from input voltage range ofÂ- 8.5–18 V, drivers also provide...

Read More »
Constant Current Dimmable LED Driver features Ethernet control.
Electronic Drivers

Constant Current Dimmable LED Driver features Ethernet control.

Intended for powering Aurora™ Classic Line Source Illuminators, Model 5000D-100 provides constant current in continuous, pulsed, or PWM modes.Â- Embedded system adds network control with 10/100Mbps Ethernet connectivity. Solution may also be used with third party LED illuminators as constant current DC to DC driver/controller. Features include temperature sensors, cooling fan operation...

Read More »
The Next Wave of Intelligent Design Automation
Sponsored

The Next Wave of Intelligent Design Automation

In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.

Read More »
X-REL Semiconductor Presents the XTR20410 and XTR20810 High-Temperature Families of N-channel Power MOSFET with Integrated Driver
Electronic Drivers

X-REL Semiconductor Presents the XTR20410 and XTR20810 High-Temperature Families of N-channel Power MOSFET with Integrated Driver

Grenoble, France,Â- – X-REL Semiconductor, the innovation leader in high-temperature and high-reliability semiconductors, unveils two new product families targeting power conversion applications in highly demanding markets including aerospace, industrial, hybrid and electric vehicles, transportation, geothermal and oil and gas. The XTR20410 and XTR20810 product families consist of...

Read More »
Electronic Drivers

Power MOSFET Drivers come in thermally efficient, small packages.

OfferedÂ- in SOT-23 and 2 X 2 mm DFN packages, MCP14A005X and MCP14A015X feature driver architecture for high speed operation; fast transitions and short delay times allow responsive circuit operation. Low input threshold is compatible with Microchip PIC® MCUs and dsPIC® Digital Signal Controllers (DSCs) while maintaining noise immunity and hysteresis. Users can design...

Read More »
Quantum Cascade Laser Drivers feature low noise technology.
Electronic Drivers

Quantum Cascade Laser Drivers feature low noise technology.

Coupling intuitive touchscreen display with low-noise drive electronics, QCL LAB Series features 0.4 Â-µA RMS noise current and 1 nA/√Hz average current noise density up to 100 kHz, allowing lowest possible detection thresholds. Models are available with output currents of 500, 1,000, 1,500, and 2,000 mA in constant current mode. Operating stand-alone or via USB or Ethernet, drivers...

Read More »
MOSFET Gate Drivers operate from 4.5-35 V.
Electronic Drivers

MOSFET Gate Drivers operate from 4.5-35 V.

Housed in 3 x 3 mm DFN package, Models IX4426/7/8M are capable of sourcing and sinking 1.5 A, and can switch 1,000 pF load in less than 10 ns. For high current requirements, 2 outputs can be paralleled for total of 3 A peak sourcing and sinking current. Inputs are TTL and CMOS compatible and are virtually immune to latch-up. Operating from -40 to +125°C,Â- Models IX4426/7/8M are...

Read More »
Electronic Drivers

PFC Offline AC/DC Drivers serve LED lighting applications.

Utilizing PFC current control algorithm, 3-level log step dimmable NCL30085, analog/PWM dimmable NCL30086, and non-dimmable NCL30088 address single-stage design implementations up to 60 W that require high power factor. Quasi-resonant mode optimizes efficiency across line and load levels. Also available, NCL30030 supports up to 150 W, 2-stage topologies. Using multiplier architecture, 2-stage PFC...

Read More »
White LED Light Engines deliver up to 4,000 lumens.
Electronic Drivers

White LED Light Engines deliver up to 4,000 lumens.

Intended for OEM fiber optic illumination, LumiBright™ Light Engines combine non-imaging optics with chip-on-board LED arrays on metal core circuit boards for optimum luminous efficacy. Model 2400B-400-W, producing up to 4,000 lm,Â- has 0.66 numerical aperture and illuminates fiber bundles and light guides from 6.0–8.0 mm in diameter. Producing up to 1500 lm, Model 2400B-500-W is suited...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers