Electronic Drivers

Electronic Drivers

IGBT/MOSFET Driver saves space in compact inverters.

With 2.5 mm height and minimum 8 mm clearance,Â- Model VOL3120 is suited for motor drives, alternative energy, welding equipment, and other high-working-voltage applications. Device provides high isolation voltage ratings of VIORM = 1,050 V and VIOTM = 8,000 V. Operating from 15–32 V with current consumption of 2.5 mA, driver boasts typical delays of

Read More »
N-Channel 40/60 V MOSFETs reduce losses to increase efficiency.
Electronic Drivers

N-Channel 40/60 V MOSFETs reduce losses to increase efficiency.

Breakdown voltageÂ- is 40 V for NTMFS5C404NLT, NTMFS5C410NLT, and NTMFS5C442NLT, which respectively have max RDS(on) values of 0.74, 0.9, and 2.8 mΩ and continuous drain current ratings of 352, 315, and 127 A. Breakdown voltage rating is 60 V for NTMFS5C604NL, NTMFS5C612NL and NTMFS5C646NL, which feature respective max RDS(on) values of 1.2, 1.5, and 4.7 mΩ and continuous...

Read More »
Electronic Drivers

Future Electronics Offers the IRSx752L Series High-Side Gate Drivers from IR

Pointe Claire, QuebecÂ-  - Future Electronics, a global leading distributor of electronic components, offers availability of International Rectifier's IRSx752L Series surface mount high-side gate drivers. The IRS10752 is a high-side, single-channel gate driver IC with 100V blocking and level-shifting capability. This allows for the gate driver to be connected directly to the gate of a...

Read More »
Chipset creates complete Half-Bridge Gate Drive block.
Electronic Drivers

Chipset creates complete Half-Bridge Gate Drive block.

Designed to drive market availability of normally-on (JFET, MESFET) as well as normally-off (MOSFET) transistors, XTR26020 Chipset enables users to create Half-Bridge Gate Drive block with dedicated power supply block in 120 x 32 x 10 mm mechanical size using 6-layer PCB with active and passive components on one side. Device includes isolated communication protocol, cross conduction prevention...

Read More »
LED Drivers include programmable and battery backup versions.
Electronic Drivers

LED Drivers include programmable and battery backup versions.

DALI and 0–10 V programmable ThoroLED™ drivers are offered with handheld programmer that can set different current outputs for drivers being used in luminaires –Â- directly on production line bench – either stand-alone or connected to computer. Also available, HotSpot™ All-In-One LED Driver/Emergency Battery Pack suits LED luminaire manufacturers that require stand-by...

Read More »
Cable Driver supports SDI- and IP-based 4K video.
Electronic Drivers

Cable Driver supports SDI- and IP-based 4K video.

Supplied in 4 x 4 mm QFN package, LMH1218 supports uncompressed 4K ultra high definition (UHD) video transmission using SDI and 10 GbE protocols. Transmission of up to 12 Gbps enables UHD resolution of 4K at 60p frame rate over one coax cable. With integrated reclocker, cable driver supports coax cable and optical media for uncompressed video transmission inside buildings and over long-haul...

Read More »
Gate Driver ICs are AEC Q100-qualified.
Electronic Drivers

Gate Driver ICs are AEC Q100-qualified.

With both outputs and inputs rated to 35 V, Series IXD_614SI is suited for switched-mode power supplies used in electric and hybrid electric vehicles, motor drives, and traction inverters. Outputs are capable of sourcing and sinking 14 A of peak current with rise and fall times of less than 25 ns. ICs have AEC Q100 Grade 1 ambient operating temperature range of -40 to +125°C, can withstand...

Read More »
Power MOSFET Gate Driver suits automotive applications.
Electronic Drivers

Power MOSFET Gate Driver suits automotive applications.

Housed in 2.8 x 2.9 mm PS-8 package, single-channel Model TPD7104F enables use of N-channel power MOSFETs for high-side switching applications. IC features self-contained charge pump that optimizes MOSFET switch and eliminates need for external components. Providing overcurrent protection and diagnostic functions, device is suited for automotive applications using 12 V batteries to operate...

Read More »
Electronic Drivers

Burst Mode Laser Driver enables low-power modules for 10G-PON.

Designed for PON ONU/ONT applications up to 12.5 Gbps, M02180 comes in 4.5 x 4.5 mm package and consists of programmable burst mode laser driver integrated with continuous mode limiting amplifier with 6 mV input sensitivity and Clock and Data Recovery with reference-free operation. Laser driverÂ- offers 3 selectable modes of operation, and other features include

Read More »
Isolated Gate Driver suits high power density applications.
Electronic Drivers

Isolated Gate Driver suits high power density applications.

Aimed at high-density power converters, motor drives, and actuators based on SiC transistors, power MOSFETs, and IGBTs, HADES® v2 chipset uses 3 ICs: HADES2P on primary side, HADES2S on secondary, and quad-diode ELARA. Unit includes all functions to drive gates of power switches in isolated, high voltage half bridge. HADES® is available in hermetic packages for extreme temperature...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers