Electronic Drivers

New LD15CHA Laser Diode Drivers are Suitable for Laser Cutting and Laser Diode Bar/Stack Applications
Electronic Drivers

New LD15CHA Laser Diode Drivers are Suitable for Laser Cutting and Laser Diode Bar/Stack Applications

LD15CHA Laser Diode Drivers from Wavelength Electronics deliver an output of 15 A current up to 28 V voltage. Units feature a bandwidth of 600 kHz, stability of less than 200 ppm (CC) and 0.3% (CP) with RMS Noise current of 35 μA at 100 kHz. Available in models with output of 2.5 A, 5 A, and 10 A, diodes come with 100 nA/√Hz noise current density, over-/under-voltage protection and slow-start...

Read More »
New LD15CHA Laser Diode Drivers are Suitable for Laser Cutting and Laser Diode Bar/Stack Applications
Electronic Drivers

New LD15CHA Laser Diode Drivers are Suitable for Laser Cutting and Laser Diode Bar/Stack Applications

LD15CHA Laser Diode Drivers from Wavelength Electronics deliver an output of 15 A current up to 28 V voltage. Units feature a bandwidth of 600 kHz, stability of less than 200 ppm (CC) and 0.3% (CP) with RMS Noise current of 35 μA at 100 kHz. Available in models with output of 2.5 A, 5 A, and 10 A, diodes come with 100 nA/√Hz noise current density, over-/under-voltage protection and slow-start...

Read More »
Electronic Drivers

Featuring two high current outputs, both capable of sourcing and sinking up to 5A, IX4340UE comes with logic inputs that are TTL and CMOS logic compatible. With both outputs having an absolute maximum voltage rating of 20V, device offers matched propagation delays, and identical output drivers that can be connected in parallel for higher current applications. Suitable for high frequency...

Read More »
Electronic Drivers

Featuring two high current outputs, both capable of sourcing and sinking up to 5A, IX4340UE comes with logic inputs that are TTL and CMOS logic compatible. With both outputs having an absolute maximum voltage rating of 20V, device offers matched propagation delays, and identical output drivers that can be connected in parallel for higher current applications. Suitable for high frequency...

Read More »
Sponsored

Importance of Motor & Generator Maintenance & Repair in the Mining Industry

Electric motors and generators are essential components for mining industry equipment and the Battery Electric Vehicle (BEV) market. These sectors rely upon this equipment heavily to meet high production demands in rugged environments, and so they require careful design, construction, and maintenance to provide longevity and durability. Pumps, hoists, crushers, muckers, haulers, and mills are only some examples of mining and milling equipment utilizing electric motors.

Read More »
LNP-C Series LED Drivers deliver an efficiency of up to 90.5%.
Electronic Drivers

LNP-C Series LED Drivers deliver an efficiency of up to 90.5%.

LNP-C Series of LED Drivers are compatible with COB and mid-power LEDs. Units are operated on 198-264Vac input voltage and offer fixed current output with power ranging from 11W to 40W. Product is suitable for commercial and residential lighting and are manufactured to IEC/EN 61347-1, IEC/EN 61347-2-13 and EN 62384 standards. Units come in independent type housing designs for stand-alone...

Read More »
LNP-C Series LED Drivers deliver an efficiency of up to 90.5%.
Electronic Drivers

LNP-C Series LED Drivers deliver an efficiency of up to 90.5%.

LNP-C Series of LED Drivers are compatible with COB and mid-power LEDs. Units are operated on 198-264Vac input voltage and offer fixed current output with power ranging from 11W to 40W. Product is suitable for commercial and residential lighting and are manufactured to IEC/EN 61347-1, IEC/EN 61347-2-13 and EN 62384 standards. Units come in independent type housing designs for stand-alone...

Read More »
Isolated Gate Drivers offer CMTI performance of >150 kV/μs.
Electronic Drivers

Isolated Gate Drivers offer CMTI performance of >150 kV/μs.

Available in ADuM4120, ADuM4120-1, ADuM4121 and ADuM4121-1 models, Isolated Gate Drivers are suitable for solar inverters, motor controllers and industrial inverter applications. ADuM4120 model features input glitch filter, while ADuM4120-1 model without glitch filter offers typical propagation delay of 33ns. ADuM4121 and ADuM4121-1 models are designed with internal Miller clamp. Operated with...

Read More »
Isolated Gate Drivers offer CMTI performance of >150 kV/μs.
Electronic Drivers

Isolated Gate Drivers offer CMTI performance of >150 kV/μs.

Available in ADuM4120, ADuM4120-1, ADuM4121 and ADuM4121-1 models, Isolated Gate Drivers are suitable for solar inverters, motor controllers and industrial inverter applications. ADuM4120 model features input glitch filter, while ADuM4120-1 model without glitch filter offers typical propagation delay of 33ns. ADuM4121 and ADuM4121-1 models are designed with internal Miller clamp. Operated with...

Read More »
LNE-320W Series of LED Drivers meet IP65/IP67 standards.
Electronic Drivers

LNE-320W Series of LED Drivers meet IP65/IP67 standards.

Available in 12 V, 24 V, 36 V and 48 V output voltages, LNE-320W Series of LED Drivers are housed in corrosion resistant aluminum casing. Unit comes with adjustable output voltage, current levels and LED brightness with 3-way built-in dimming options. Offering more than 700,000 hrs of MTBF, units meet IEC/EN 61000-3-2, Class C standards. Drivers come with 6kV and 4kV of common mode and...

Read More »
LNE-320W Series of LED Drivers meet IP65/IP67 standards.
Electronic Drivers

LNE-320W Series of LED Drivers meet IP65/IP67 standards.

Available in 12 V, 24 V, 36 V and 48 V output voltages, LNE-320W Series of LED Drivers are housed in corrosion resistant aluminum casing. Unit comes with adjustable output voltage, current levels and LED brightness with 3-way built-in dimming options. Offering more than 700,000 hrs of MTBF, units meet IEC/EN 61000-3-2, Class C standards. Drivers come with 6kV and 4kV of common mode and...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics