Linear Regulators offer low dropout.
Models LP3883/2/1 CMOS dual-input, voltage regulators enable high efficiency linear conversion from 1.8-1.5 V and 1.2 V for notebook and set-top box applications, while consuming low quiescent current of only 3 mA. Power input may be fed independently from high current supply facilitating conversion from input rails of less than 2.5 V. Dropout voltage for Models LP3883/2/1 is typically 210 mV/110...
Read More »
Margining Controller simplifies automated PCB testing.
Model LTC2920 power supply margining controller allows supply rails to be precisely adjusted up and down during PCB testing. It sources or sinks current into feedback node of controller chip or voltage adjust pin of regulator module. Margining current is set with single resistor channel. Output current is settable over 400:1 range and margin voltage precision of
Read More »
Switching Regulators offer 95% efficiency.
Models SR40 and SR80 are constant frequency, current mode step-up converters. Model SR40 delivers 40 W to load, accepts 5-10 V input, and provides 9, 12, 15, 18 and 24 Vdc output. Model SR80 delivers 80 W to load, accepts 10-18 V input and provides 15, 18 and 24 Vdc output. Both regulators include input undervoltage protection, external synchronization, 300 kHz constant frequency, 44 W/cu in....
Read More »
LDO Regulator can sink and source 3.1 A peak current.
Model FAN1655 features Kelvin sensing, ensuring regulation of VTT to VDDQ/2 Ã-
Read More »
Direct Drive Linear Motors for Food/Beverage, Medical/Pharma & Packaging Applications
This eBook provides an overview of how direct drive linear motors can be an essential part of an efficient design ensuring the equipment operates and performs as intended.
Read More »
Low Dropout Regulator offers high ripple rejection.
With CMOS technology, Model FAN2534 150 mA LDO regulator offers fast turn-on (150 Ã-µsec) and low noise (50 Ã-µVrms). Trimmed short-circuit current limit (300 mA) protects thin PCB interconnects. For lower battery drain, FAN2534 has 180 V dropout voltage at 150 mA, and provides enable/shutdown control and thermal limiting for additional system safety. Unit comes in SOT-23, 5-lead package....
Read More »
Single Phase Voltage Regulator is pad mounted.
Voltage regulator has microprocessor-based control panel and temperature range of -40 to +85Ã-
Read More »
Voltage Regulator has round-tank functionality.
Pad-mounted, Single-phase, 32-step, voltage regulator allows system planners to regulate voltage on new and existing underground systems. Unit is available for system voltages from 2400 V, 3-wire to 24940 V, 4-wire. With current ratings from 50 to 548 A, regulator incorporates either 200 or 600 A deadfront termination system. Features include CL-5 control, automatic pressure-relief device, and 3...
Read More »
Low Drop-Out Regulator features programmable power-on reset delay.
MIC5249 LDO is capable of providing up to 300 mA and is designed for power-up sequencing in microprocessors. It allows user to program delay on RESET pin that alerts processor when output of LDO has reached and settled on its intended value, allowing processor to come up gradually. MIC5249 is available in tiny MSOP-8 package and comes in fixed voltages: 2.5, 2.6, 2.7, 2.8, 2.85, 2.9, and 3.0 V....
Read More »LDO Regulator serves low stand-by mode applications.
MIC5239 micropower low-dropout regulator provides keep-alive voltage for power-sensitive applications. It features low quiescent current of 23uA and input voltage range of 2.3 to 30 V. Regulator is stable with ceramic or tantalum output capacitor, and capable of providing up to 500 mA of operating current. Fixed output voltages include 5.0, 3.3, 2.5, and 1.8 V. Unit is offered in thermally...
Read More »
LDO Controller drives digital ICs.
MIC5159 low dropout regulator controller drives low-voltage DSPs, microcontrollers, and logic ICs. Available in IttyBitty(TM) SOT-23-6 package, it requires very little headroom to provide well-regulated supply of 1.5, 1.8, or 2.5 V. Device's headroom, or dropout voltage, is limited only by RDS(ON) of external MOSFET. It has fast transient response, good regulation over variation of line, load,...
Read More »
Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine
The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.
Read More »
