Buck Regulator is housed in 7-lead SPAK package.
MIC4685 PWM, 200 KHz buck regulator carries input voltage range of 4 to 34 V and has 3 A output current. Output voltage is adjustable down to 1.25 V. Junction-to-case thermal impedance of 2.2Ã-
Read More »
Low-Dropout Regulator powers processor cores.
MIC49150 1.5 A dual supply LDO is capable of output voltages down to 0.9 V and responds instantly to any abrupt change in load current. It supports input voltage as low as 1.4 V and features thermal shutdown, current limit protection, and ability to use ceramic output capacitors. Transient response is 10 MHz GBW and dropout is 500 mV at 1.5 A. Regulator is available in MSOP-8 and S-Pak packages....
Read More »
LDO Regulator provides standby power.
Low dropout regulator, in IttyBitty(TM) SOT-23-5 package, suits applications in portable and fixed systems and consume only 18 microA of quiescent current. Model MIC5233, with input voltage range of 2.3 to 36 V, supplies up to 100 mA of output current. Model MIC5235, with input voltage range of 2.3 to 24 V, supplies 150 mA. Applications include keep-alive circuits in battery or telecom systems,...
Read More »Integrated Circuits have ultra-low dropout of 500 mV.
Low-dropout regulator (LDO) ICs are manufactured in S-Pak packaging. MIC3730X LDOs provide 1.5, 1.8, or 2.5 V at 3 A from minimum supply of 2.25 or 3.0 V. Model MIC37300 has 3 terminals, MIC37301 includes fault condition error flag and enable pin for on/off control. MIC37302 offers adjustable output voltage as well as output voltage on/off control. All devices are microCap designs, which permits...
Read More »
Why Use A Locking Cord?
Learn about the benefits of using locking cords in applications that rely on extensive technological infrastructures.
Read More »
Switching Regulators provide small footprint.
S-835X Series of PWM and PWM/PFM CMOS switching regulators consist of reference voltage source, oscillation circuit, error amplifier, phase compensation circuit, PWM control Circuit (S-8355/57) and PVWM/FM switching control circuit (S-8356/58). Oscillation frequencies of 100, 250, and 300 kHz are available. Regulators have low operation current consumption of 25.9 microA (3.3 V, 100 kHz). SNB6B...
Read More »
Static Voltage Regulator monitors for source voltage sags.
STARSINE(TM) Medium Voltage Static Voltage Regulator (MV-SVR) provides compensation for utility sag events within 1/4 to 1/2 cycle of detection. System is capable of boosting load voltages from as low as 55% of nominal to above 90%. Offered with ratings from 100-1200A with system voltages of 3.3kV to 34.5kV at 50/60Hz, MV-SVR operates with 99.3% rated efficiency. Unit requires no environmentally...
Read More »
Low Dropout Regulator is available in S-Pak package.
MIC37150/1/2 1.5A LDO is designed for powering 1.5, 1.8, or 2.5 V from minimum supply of 2.25 or 3.0 V. It features dropout of 500mV over all conditions. MIC37150 is a 3-terminal device; MIC37151 includes error flag to warn of fault condition and enable pin for on/off control; and MIC37152 offers adjustable output voltage as well as on/off control of output voltage. uCap design allows use with...
Read More »Low Dropout Regulator comes in SC-70 package.
Model TC1016 can replace SOT-23 LDOs. It has low dropout voltage of 150 mV at 80mA and supply current of 50 Ã-µA. Output voltage accuracy is Ã-
Read More »
Buck Regulator is over 85% efficient.
MIC4684 buck regulator's boost capacitor increases available voltage to saturate internal power switch. Regulator has input voltage range of 4 to 34V and 1.5A output current. Built-in safety features include cycle-by-cycle current limit, frequency foldback short circuit protection, and thermal shutdown. It is available in adjustable output voltage version.
Read More »
Switching Regulator controls power for PDAs.
Single-coil S-8460 PWM combination buck and boost switching regulator-controller is suitable for single-cell Lithium-Ion devices such as PDAs, cell phones, notebook PCs and power supply modules. It includes automatic-selection control circuit, reference voltage source, oscillation circuit and error amplifier. Regulator has variable output voltage, wide input voltage range, 300 kHz oscillation...
Read More »
Does Your Parking Lot Make a Good First Impression?
To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.
Read More »
