End Prep Cutter Blades cut without fluids.

End Prep Cutter Blades cut without fluids.

MILLHOGÂ-® Cutter Blades feature radical chip breaker to direct chip away from tube surface and minimize heat generated. Made from T-15 tool steel and titanium nitride-coated for added lubricity, blades can cut stainless steels, P-91, and other hard materials without fluids. Capable of beveling, facing, and boring simultaneously, MILLHOG Blades are available in any angle of end prep including...

Read More »

Maching Service offers water jet cutting option.

Waterjet Cutting platform is available for wide variety of materials including steel, stainless steel, aluminum, brass, bronze, plastics, rubber and exotic metals. Clean, single cutting process often eliminates secondary operations. HammerHead WaterJet uses 60,000 psi stream of water and abrasive grit to cut, shape, drill and finish any 2D design in sheet material up to 4 in. thick.

Read More »
Portable Plasma System is suited for cutting sheet metal.

Portable Plasma System is suited for cutting sheet metal.

Usable on aluminum and mild steel, FirepowerÂ-® PC250 weighs 24 lb and incorporates grab-n'-go handle for portability. CSA-approved unit, equipped with hand torch, 2 spare electrodes, and 2 spare cutting tips, has 40% duty cycle and Â-¼ in. cutting capacity. For operation, users connect system to 120 V, single-phase power supply via 20 A molded plug and connect shop compressor for air....

Read More »
Gate Cutters have heavy-duty design.

Gate Cutters have heavy-duty design.

Drop forged from alloy steel, Gate Cutters are precision machined and heat treated to ensure sharp, durable edges. Products are available with flat or rounded back blades and feature slim line profile and fast-acting coil spring. Both 5 and 6 in. models have bow style handles, while 6 and 7 in. flat back cutters are offered with right or left hand, ergonomic style handles or adjustable blade...

Read More »
Conduit Cutter never penetrates conduit wall.

Conduit Cutter never penetrates conduit wall.

Model 8600 is used to cut Â-½ and Â-¾ in. EMT electrical conduit in residences, industrial plants, and offices. Cutting wheel features shoulder that prevents it from cutting completely through conduit wall, eliminating need to debur inside after cut is made. Other features include heavy-duty cast body, smooth spindle knob for easy gripping, and replaceable cutter wheel.

Read More »
Hydraulic Cutter cuts copper and aluminum cable.

Hydraulic Cutter cuts copper and aluminum cable.

Battery-actuated PATRIOTÂ-® PATCUT245CUAL-18V is capable of cutting cable up to 2.45 in. OD. Ergonomic design allows one hand operation, so user has one hand free to manipulate conductor into proper cutting position. Latch-style cutting head allows interference-free closure for mid-span cuts, and rotates 180Â-

Read More »
Wire Labeling System provides cutting and stripping.

Wire Labeling System provides cutting and stripping.

In-Line Labeling System combines Brady's Wraptor Wire ID Printer Applicator with cut and strip machines. System prints logos, bar codes, time, date, and sequencing serial numbers for each wire in alphanumeric, hex, octal, and other formats. Labels are automatically located and wrapped, eliminating placement errors. Entire jobs can be stored in machines, allowing recall of wire and labeling...

Read More »
Screen Classifying Cutter controls particle size range.

Screen Classifying Cutter controls particle size range.

Model SCC-30 Cutter cuts hard, soft and fibrous materials into controlled particle sizes. Helical rotor with cutter blades attached to array of interconnected parallelograms continuously shears oversize materials against twin, stationary bed knives. Suited for coarse grinding of materials into particles ranging from granules down to 20-30 mesh, cutter has 30 in. throat width and can be fitted...

Read More »
Triple-Axis CO2 Laser cuts at rates to 1,575 ipm.

Triple-Axis CO2 Laser cuts at rates to 1,575 ipm.

Featuring bridge-type construction and flexibility of dual pallet changer, TLZ Series includes TLZ-408 with 98 x 49 in. cutting stroke and TLZ-510 with 122 x 61 in. axis movements. Traverse speeds of 3,937 ipm for X and Y axes and 2,362 ipm for Z axis are kept in check with ac servo drive motors, ball screw, and linear ball guide mechanism for precise, controlled movements. Laser power options...

Read More »
Air Plasma Cutting System offers gouging capabilities.

Air Plasma Cutting System offers gouging capabilities.

SpectrumÂ-® 1000 includes Auto-Line(TM) primary power management technology, which allows automatic connection to any primary input voltage from 208-575 V, single- or 3-phase, 50-60 Hz. Ultra-Quick Connect(TM) torch facilitates plasma torch connection and removal, while Auto-Refire(TM) Technology automatically controls pilot arc when cutting expanded metal or multiple pieces of metal. Unit...

Read More »

All Topics