Fenwal System One Combines Gas Ignition with Digital Temperature Controller in Flexible, Economical Package
September 14, 2006 Ashland, MA-Fenwal Controls announces its new System ONE(TM) gas ignition + temperature controller for commercial and industrial OEM customers. Developed for gas-fired applications, the System ONE(TM) combines automatic gas ignition with Fenwal's flexible Series 59 digital temperature controller featuring a bright three-digit LED digital display. The duty-matched components of...
Read More »Leading the Way Towards Global Application - Fenwal Gas Ignition Controls Approved to Latest CE Standard
5/29/2007 To meet the requirements of customers pursuing global markets, Fenwal Controls, a leading manufacturer of automatic gas ignition and temperature controls for commercial and industrial OEM customers, has recently received approval on the new Fenwal Series 35-60, 35-61 and 35-63 gas ignition controls to the latest CE standard EN 298:2003. The new European CE standard, effective at the end...
Read More »
Gas Ignition Controls - Intermittent Pilot
9/14/2006 Ashland, The new Fenwal Series 35-63 Intermittent Pilot (IP) Gas Ignition Controls for 24 VAC power are now in production. They are specifically designed for HVAC, commercial cooking equipment, boilers, furnaces and other gas fired applications using the spark-to-pilot technique. The Fenwal Series 35-63 IP Gas Ignition Controls are microprocessor-based for precise, repeatable timing...
Read More »
FRAM-Enhanced(TM) MCU comes in standard 8051 package.
Data storage/processing system, VRS51L3174, drops into 44-pin QFP sockets to facilitate device migration. This 8051-based microcontroller (MCU) offers 8 KB nonvolatile ferroelectric random access memory (FRAM) memory and operates at 3.3 V over industrial temperature range. SoC DAQ solution combines 40-MIPS, single-cycle 8051 processor; 64 KB Flash with in-system/in-application programming; 4 KB...
Read More »
Top 10 Industries That Benefit From Water Treatment Solutions
Learn about which industries benefit the most from water treatment solutions.
Read More »
Controller monitors switching regulator input/output voltage.
Model LTC2953-1 pushbutton controller integrates supervisory voltage monitors and timers for tracking switching regulator's input and output voltages. Device features input and output voltage comparators, pushbutton input, and software interrupt output in 3 x 3 mm DFN-12 package. Drawing 14 Ã-µA supply current, unit operates over 2.7-27 V input supply, serving singe- or multi-battery...
Read More »AC Drives are designed to minimize downtime.
Able to work with motors rated from 1/8-25 hp, V1000-series AC drives feature maintenance monitors that ensure drive health. On-line tuning helps maintain harmony with motor, and application presets facilitate installation. Able to be stacked side-by-side due to heat-sink technology, RoHS-compliant series features EN954-1 Safety Category 3 safety input to disconnect motor at first sign of trouble.
Read More »Graphics Display Controller suit automotive TFT LCD panels.
Supplied in 176-pin QFP package, single-chip TX4964FG drives and manages TFT LCD panels found in instrument clusters in automobiles. SoC integrates 120 MHz MIPS-based(TM) TX49/L4 64-bit CPU core, TFT LCD panel controller, digital-camera interface, peripheral controllers, and frame-buffer memory. Its 4 MB embedded DRAM eliminates need for external RAM ICs, reducing system-level power. Also...
Read More »Switching Regulator IC suits low-noise applications.
Housed in 4 x 6 mm MLFÃ-® package, 3 A SuperLNR MIC38300 Low Noise Regulator produces less than 5 mW of output noise and 70 dB of PSRR. Ultra-fast dynamic performance allows unit to maintain less than 30 mV of output voltage deviation even during fast load transients. Target markets include point-of-load and digital IC power regulators for networking, servers, wireless base stations,...
Read More »Synchronous Buck Regulators offer light load efficiency.
Supplied in 2 x 2 mm MLFÃ-® package, MIC23050/1 are 4 MHz, 500 mA synchronous buck (step-down) regulators suitable for portable applications. Hyper Light Load(TM) enables these DC/DC converters to achieve over 85% efficiency at 1 mA while offering minimal ripple across all loads. Standard features include 2.7-5.5 V input, 0.6-2.5 V preset output voltage options, and 20 Ã-µA quiescent...
Read More »Motion Control System features 4-axis design.
Guidance System vision-guided motion control system is based on distributed network architecture that allows it to be located at point of use. Integrated motor power supply generates 320 Vdc and can power a wide range of brushless motors that are equipped with incremental, absolute, or analog encoders. Packaged in 700 x 111 x 152 mm enclosure, system also includes Guidance Motion Controller and...
Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »
