AEi Launches Flexible Automation System, CMAT X, for Digital Camera Module Alignment, Assembly & Test
CMAT X Station Supports Five Degree of Freedom Alignment for High Volume Production of Ultra Small Format Camera Modules WILMINGTON, Mass.-- Automation Engineering Incorporated (AEi), a global supplier of high-precision, flexible automation systems, announces the availability of its CMAT X flexible automation platform for manufacturing ultra small format digital camera modules. The new precision...
Read More »
PLC/HMI features white LED backlight.
Equipped with 5.7 in. TFT QVGA display, Model V570-57-T20B provides multiple auto-tuned PID loops and internal 120 K database for datalogging and recipe programming. Display offers more than 1,000 user-designed screens and up to 500 images per application. On-board I/O can be added by snapping module onto back of unit. Communication options include TCP/IP Ethernet, GSM/SMS, MODBUS, and CANopen...
Read More »Point Level Switch offers SIL-certified overfill protection.
Safety IntelliPoint RF(TM) Switch, used in above-ground bulk storage tanks, meets American Petroleum Institute's 2350 Recommended Practice for overfill/spill protection. Specifically, it comes standard with SIL1 certification; SIL2 is optional, and SIL3 is possible with redundant switch. Integral software continuously monitors application for changes and maintains repeatable trip point on probe....
Read More »
Power Entry Modules mount in tight spaces.
Providing overcurrent protection up to 20 A, Series 6135 offers C14 appliance inlet, while Series 6136 features C20 inlet, according to IEC 60320. Both provide snap-in mounting and are equipped with thermal positively trip-free release circuit breaker. Series 6135 features 2-pole switch with or without 1- or 2-pole overcurrent protection, while 6136 is offered in 1-pole with switch only or switch...
Read More »
Direct Acting High Speed Servo Valve (DASV)
Download this paper to learn about how high performance servo valve's can be used in your most demanding hydraulic and pneumatic applications.
Read More »HVAC Bypass Controller minimizes electrical system harmonics.
Suited for NEMA 12 ventilated enclosures, Pow-R-Gate HVAC bypass controller utilizes 18-pulse variable-frequency technology and meets IEEE 519-192 requirements at input terminals. It is rated up to 800 hp at 460 V. Multifunction programming and display unit, with average setup of 8 parameters, allows selection of manual/automatic bypass. Unit includes 3 contactor bypass configuration, PID...
Read More »Mixed-Signal, 16-Bit MCU suits power-sensitive applications.
Designed on RISC architecture, MAXQ2010 balances execution rates to 10 MIPS at 10 MHz and 12-bit ADC conversion data sampling up to 312 KSPS with low-power active-mode current of 3.1 mA, typ, at 10 MHz. Integrated regulator allows direct operation from one commodity lithium coin cell at 2.7-3.6 V, and stop mode reduces power consumption to less than 370 nA (typ) or 6.5 Ã-µA (max). MCU suits...
Read More »
Integrated Stepper Motor/Drive operates at up to 1,500 rpm.
Model STM23 is size 23 motor and drive, contained in aluminum heatsink housing, with RS232/RS485 interfaces for programming drive using rich instruction set software. Motor operates in closed loop mode and coding can be downloaded to drive or unit can be controlled using commands from attached controller. With supply of 12-80 Vdc and 0.2-5 A peak output current, it is offered in single or double...
Read More »HVAC Bypass Controller is fully network-ready.
Available in NEMA 1/3R enclosure, 2009 Pow-R-Gate employs variable frequency drive technology and comes in package that facilitates wiring, setup, and operation. Controller is rated up to 150 hp for 200/240 V applications and to 200 hp for 460 V systems. It offers multifunction programming and display unit, and operators can select manual or automatic bypass. Three contactor bypass configuration,...
Read More »
Digital Servo Drives feature PCB mount design.
Providing 10-80 Vdc operation while delivering 12 A continuous/20 A peak current, DZ Series can be configured to operate in torque, velocity, and position modes for brushed, voice coil, or brushless motors. Units deliver up to 1 kW continuous power when needed and can achieve up to 98% efficiency. Supporting CANopen and RS-232/485 up to ~1 Mbaud, drives accept variety of input commands including...
Read More »Mounting Plates provide assembly of slides and tables.
Provided with through holes on 25, 50, or 100 mm grid, Right Angle Mounting Plates can be used in conjunction with Techno Slides to build XY or XYZ positioning systems. All mounting surfaces are milled flat to 0.05 mm while they are perpendicular to 0.1 mm. Available in 5 sizes with wall thicknesses from 12-15 mm, plates are made of die-cast aluminum, offering thermal conductivity and corrosion...
Read More »
Solve Any Large-scale Water Control Problem with the Aqua Dam Flood Barrier
Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.
Read More »
