Birchwood Technologies Gel Products are offered in 1 gal and 5 gal containers.
Birchwood Technologies Gel Products are available in Presto Black® Gel, Antique Brown® Gel, and Antique Black® Gel formulations. Presto Black® Gel is designed for use on non-stainless iron and steel surfaces whereas Antique Brown® and Black® Gel formulations are used on brass, bronze, and copper substrates. These gels takes 2 to 10 minutes for removing oil, oxides and welding flux and are...
Read More »
2K850 UV Cure Coating offers thickness of 200-400 μm.
2K850 UV Cure Coating is suitable for LED, automotive, aerospace and other tough electronic applications. Product is enhanced with edge coverage, adhesion, hardness and scratch resistance capabilities and offers protection against water, moisture and condensation. 2K850 coating meets UL94V-0, IPC-CC-830C, MIL-I-46058C and IEC 61086 standards and features an operating temperature range from -65 to...
Read More »
2K850 UV Cure Coating offers thickness of 200-400 μm.
2K850 UV Cure Coating is suitable for LED, automotive, aerospace and other tough electronic applications. Product is enhanced with edge coverage, adhesion, hardness and scratch resistance capabilities and offers protection against water, moisture and condensation. 2K850 coating meets UL94V-0, IPC-CC-830C, MIL-I-46058C and IEC 61086 standards and features an operating temperature range from -65 to...
Read More »
Electrolube's Silicone Coatings include 2K750, MCS and HCS.
Electrolubes’ 2K750 Conformal coating is compliant to UL94V-0 standards and offers operating range of -40 to +220°C and a cure time of 10 mins at 80°C. Moisture Cure Silicone conformal coating (MCS) and Heat Cure Silicone coating (HCS) are low stress coatings that offer -40 to +200°C operating temperature range. MCS provides touch-dry time of 10 mins at 25°C at ambient conditions whereas...
Read More »
Design & Manufacturing Process of a Coil
Because the design and manufacturing of electromagnets are critical to the successful operation of the application, it's important to spend time defining your requirements before purchasing coils for an application. This eBook will guide you through the process of evaluating the application's constraints, identifying the needed specifications, and collaborating with a manufacturer to develop an appropriate coil solution for the application.
Read More »
Electrolubeâ™s Silicone Coatings include 2K750, MCS and HCS.
Electrolubes’ 2K750 Conformal coating is compliant to UL94V-0 standards and offers operating range of -40 to +220°C and a cure time of 10 mins at 80°C. Moisture Cure Silicone conformal coating (MCS) and Heat Cure Silicone coating (HCS) are low stress coatings that offer -40 to +200°C operating temperature range. MCS provides touch-dry time of 10 mins at 25°C at ambient conditions whereas...
Read More »
Electrolube's UV Cure Coating Announced 'SMT Technology Product of the Year' in India
Electrolube, the leading manufacturer of specialist chemicals for the electronics, automotive, LED and industrial manufacturing industries, today announced that its innovative new 2K850 two-part, UV cure conformal coating has been selected as ‘SMT Technology Product of the Year’. This exciting new product was declared best in class for the Conformal Coatings category by the popular Indian...
Read More »
Electrolubeâ™s UV Cure Coating Announced âSMT Technology Product of the Yearâ™ in India
Electrolube, the leading manufacturer of specialist chemicals for the electronics, automotive, LED and industrial manufacturing industries, today announced that its innovative new 2K850 two-part, UV cure conformal coating has been selected as ‘SMT Technology Product of the Year’. This exciting new product was declared best in class for the Conformal Coatings category by the popular Indian...
Read More »
Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements
St. Louis, MO – Chemline, Inc., specifically formulated CHEMLINE 2265 as an interior lining and an exterior coating for large diameter transmission lines of potable water, waste water, and raw water. The formulation adheres extremely well directly to steel and requires no primer. CHEMLINE 2265 adds long-term corrosion protection to steel substrates in even the most demanding environments. It...
Read More »
Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements
St. Louis, MO – Chemline, Inc., specifically formulated CHEMLINE 2265 as an interior lining and an exterior coating for large diameter transmission lines of potable water, waste water, and raw water. The formulation adheres extremely well directly to steel and requires no primer. CHEMLINE 2265 adds long-term corrosion protection to steel substrates in even the most demanding environments. It...
Read More »
PG&O® Provides Advanced Optics and Thin-Film Optical Coatings for Biomedical Applications
Company will showcase optical components and thin film filters for medical and life science applications at SPIE’s BiOS booth #8648 and Photonics West 2018 booth #4867, Jan. 27- Feb. 1, 2018, Moscone Center, San Francisco. SANTA ANA, CA – December 19, 2017 - Precision Glass & Optics (PG&O - www.pgo.com), provides optical thin film coatings and custom optical solutions for a wide variety of...
Read More »
SpillVak Absorbs Up to 6X More Fluid Than Rock- and Clay-based Absorbents
Are you struggling to find an absorbent that doesn't result in at least some leaching? SpillVak outperforms all rock and clay-based materials. Check out our video to learn more.
Read More »
