Coatings

Epoxy Adhesive/Sealant/Coating is chemical-resistant.

Epoxy Adhesive/Sealant/Coating is chemical-resistant.

Featuring thermal stability, 2-component EP21ARHT-1 is 100% reactive and does not contain any solvents or diluents. It has 2:1 mix ratio by weight and cures at room temperature. Exhibiting minimal shrinkage upon cure, product does not sag or drip on vertical surfaces. Designed to withstand thermal shock and abrasion, it adheres to metals, glass, ceramics, cements, woods, vulcanized rubbers, and...

Read More »
Floor Finishes provide chemical-resistant surfaces.

Floor Finishes provide chemical-resistant surfaces.

Water-based FasTop(TM) seamless urethane cements can be installed and ready for service in hours because of their Urethane-cement chemical reaction. FasTop M, applied as mortar, can be installed in one step without topcoat. FasTop S System consists of trowled slurry blend with silica sand broadcast finish. FasTop S-U1 Upgrade System uses decorative quartz broadcast instead of silica sand and...

Read More »
Dual Cure Adhesive has excellent wetting characteristics.

Dual Cure Adhesive has excellent wetting characteristics.

LX10072 UV/moisture conformal coating is designed for use in high-speed dip, spray, and flow conformal coating equipment. Flexible adhesive, formulated to provide protection against moisture and harsh chemicals, remains bubble free. Product is compatible with industry standard solder masks, no-clean fluxes, metallization components, and substrate materials.

Read More »
Acrylic Coating applies directly to metal siding.

Acrylic Coating applies directly to metal siding.

BOND-PLEX WB single-component, waterborne, acrylic-resin coating, for interior or exterior use over pre-finished metal siding, eliminates need for primer. It may be applied to fluorocarbons such as Kynar, polyester polymers, and silicone polyesters, or when low-sheen finish is required to match existing coil-coated metal siding. Low-VOC coating has low odor and dries to mar-resistant finish. It...

Read More »
Epoxy Resin System offers chemical resistance.

Epoxy Resin System offers chemical resistance.

Two-component EP41S-2 epoxy adhesive/sealant and coating cures at ambient temperatures or more quickly at elevated temperatures. It is 100% reactive and contains no solvents or diluents. EP41S-2 adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. It withstands prolonged immersion in strong organic solvents. Operating temperature range is -60 to +275Â-

Read More »
Coating System prevents floor erosion.

Coating System prevents floor erosion.

Tigerguard(TM) coating system provides high mil barrier on floors that need to stand up harsh conditions. It offers durable surface that is easy to clean and maintain, and adds high gloss shine to work environments. It also provides superior gloss retention, fills in surface defects, and resists mars, scratches, abrasion, chemicals, and impact. Tigerguard system requires no special skills for...

Read More »

Stainless Steel Paint protects metal.

Duralco(TM) 6105 SP Stainless Steel Paint combines corrosion resistance of 316L stainless steel with 1200 deg F temperature protection. Protective coating cures overnight at room temperature (or air dries in 15 to 30 minutes) to form protective layer of stainless steel. Suitable for protecting metal pipes, stacks, boilers, furnaces, and heat exchangers, paint coats and protects up to 30 square ft...

Read More »
Sealant protects chrome plated tools.

Sealant protects chrome plated tools.

Dri-Touch(R) topcoat penetrates and protects recessed areas of parts that can rust prematurely due to thin plating deposits. It can also be applied to hand tools, fixtures, castings, forgings, powdered metal, dies, and partially finished components in service or storage. Coating will not drain or wick off into packaging, thus maintaining effective, long-term barrier against humidity and...

Read More »
High-Temperature Paint provides corrosion protection.

High-Temperature Paint provides corrosion protection.

Single-part, aluminum-rich Corr-Paint(TM) CP4010 ceramic-silicone based coating protects steel components and structures for applications to 1200 deg F. It is resistant to acids, bases, and solvents, and provides thermal-shock, salt-spray, and UV resistance. Water-dispersible coating dries at room temperature and cures fully during operation at temperatures above 450 deg F. Non-flammable, low VOC...

Read More »

All Topics