Resin Fiber Discs perform aluminum grinding operations.
Grinders

Resin Fiber Discs perform aluminum grinding operations.

Resin Fiber Discs resist loading and ensure constant grain contact with work surface. Discs are used for weld blending, grinding, deburring, and finishing on aluminum surfaces. They are offered in Twist-lock and Posi-grip styles for air tools and with 7/8 in. arbor hole for electric tools. Discs do not require grease sticks.

Read More »
Cleaning Equipment

Wet/Dry Vacuum has 9 gallon capacity.

Model MV-900-0MEV incorporates 25 ft electrical cord with cord wrap, poly construction, recessed polyolefin wheels, and 10 ft hose with inlet cuff. Offered with 1.3 hp, 2-stage bypass, 120 V, self-cooling, continuous motor, 9 A unit also includes 101 cfm, 6 gal water recovery and 87 in. waterlift. Also included: aluminum/plastic extension wand, curved plastic wand, 12 in. combination floor tool,...

Read More »
Power Sweepers provide dust control.
Sweepers

Power Sweepers provide dust control.

Models 6600 and 6650 run on 1.6 liter, fuel-injected gasoline/LPG engines. Model 6600 features dual dust side skirts that seal main brush door compartment. Model 6650 offers optional SB2 auxiliary sidebrush that cleans areas not accessible to regular sweepers. Model 6650XP increases sweep path to 76 in. Instant Access Panel Filter allows filter to be checked without removing components....

Read More »
Wet Scrubbers eliminate odors from industrial sources.
Scrubbers

Wet Scrubbers eliminate odors from industrial sources.

Multi-use Odor Scrubbers produce Zero Odor at stack. They accommodate gas inlet temperature up to 2000°F, and can be engineered to accommodate particulate in addition to gases. Velocities range between 150-500 fpm. Mist eliminator can be specified to 99% at 2 microns for applications that require very low output numbers. Systems are pre-piped and include PLC controls. They are made of...

Read More »
Odor Control Systems
Sponsored

Odor Control Systems

Functionality offered by the PEPCON OdorMaster wet scrubber odor control system is described in this paper. Basic way of evaluating odors is mentioned, and a list of odor thresholds, molecular weights, vapor pressures, and odor descriptions for compounds associated with industrial and municipal operations is presented in the form of a table. Process of removing noisome compounds from gaseous discharges emanating from simple and complex malodorous air sources by using wet scrubber odor control systems is elaborated. Functioning and advantages of PEPCON OdorMaster models I, II, and III, and their applications are explained in detail providing chemical equations of the neutralization and oxidation processes. A graphical representation of the relationship between the percent of acid or base in ionic form as a function of PH for various odorous compounds is also incorporated.

Read More »
Scrub Brush offers uneven, water-resistant filament.
Applicator / Finishing / Cleaning Brushes

Scrub Brush offers uneven, water-resistant filament.

Swivel Scrub® head allows movement around fixtures, equipment, corners, and baseboards. Black, industrial strength, longwearing, polyester fill is water resistant and also resists high temperatures, acids, alkalis, and most cleaning solutions. Uneven polyester trim gets into grout lines and uneven surfaces. Available in eight color-coded options, unit offers lock-down collar that securely...

Read More »
Edge Trim Removal System stifles noise by 19%.
Conveyors

Edge Trim Removal System stifles noise by 19%.

TrimPAC(TM) Whisper permits operation at 65 dBa sound pressure level. It includes inlet silencer, inline silencer, and fan silencer to block, absorb, and remove noise generated by high velocity movement of air and trim through system. TrimPAC delivers low decibel operation during cutting and evacuating of film, foil, laminate, paper, and other waste material from slitters and die cutters up to...

Read More »
Paint and Gasket Remover contains no methylene chloride.
Chemical Strippers

Paint and Gasket Remover contains no methylene chloride.

Sprayon® E-Z Strip(TM) cleans baked-on residues from gaskets, adhesives, RTV silicones, carbon deposits, grease, oil, and rust. Product also removes industrial coatings such as oil, latex, acrylic and lead-based paints, shellac, lacquer, and powder coatings. Suitable for wood, masonry, plaster, aluminum, and steel substrates, stripper is applied via aerosol spray. Operation consists of...

Read More »
Protective Bellows are sealed against air, dust, and light.
Instrument Bellows

Protective Bellows are sealed against air, dust, and light.

ThermiSeal bellows have open-to-closed length ratios that minimize space requirements. Bellows protect actuating members that move through range of travel. They are available in a variety of shapes and sizes, and in urethane or PVC materials. Uses include precision medical equipment, semiconductor equipment, clean room applications, and inspection and test equipment.

Read More »
Mechanical Interlock Devices offer finger-safe fuse holders.
Interlocks

Mechanical Interlock Devices offer finger-safe fuse holders.

IEC 309-1 and 309-2 PowerSwitch(TM) devices are offered in 20, 30, 60, and 100 A non-fused configurations and 20, 30, and 60 A fused configurations. Contained in non-metallic NEMA Type 3R, 4X, and 12K Valox® 357 enclosures, IP67 Watertight devices combine pin and sleeve receptacle with safety disconnect switch. With bottom-hinged cover and pistol grip handle, enclosure design fits within...

Read More »
Flap Disc eliminates overheating when grinding stainless.
Discs

Flap Disc eliminates overheating when grinding stainless.

POLIFAN® SGP-ZIRKON-COOL features flaps made of COOLFLAP® material layered in sequence with regular Zirconia Alumina flaps to effect cool grinding. COOLFLAP® allows aggressive grinding with no glazing of flaps or deterioration. Available in 40, 60, and 80 grits, in flat and conical styles, and in 4 Â-½ and 5 in. diameters, disc handles grinding applications ranging from...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics