New CoroChuck 935 Hydraulic Chuck is Based on Fulcrum Technology
CoroChuck 935 Hydraulic Chuck is offered in 20 and 25 mm bore sizes for HSK-A/C/T, Coromant Capto®, cylindrical shank and VDI machine interfaces. Unit offers clamping length of four times the diameter. The chuck uses EasyFix™ sleeves that help in adjusting center height. Unit comes with a metallic sealing and thin brazed membrane for an improved clamping function.
Read More »
Safe as Well as Efficient
The HAIMER Safe-Lock™ pull out protection system is becoming the industry standard. The HAIMER Safe-Lock™ pull out protection system ensures safe cutting tool clamping. Special drive keys in the tool holder perfectly match the spiral shaped grooves on the cutting tool shank, thus creating frictional clamping forces and a positive locking form-fit. This effectively prevents the cutting tool...
Read More »
Hydraulic Chucks and Holders are suitable for metalcutting industry.
EPB 5831 Slim Hydraulic Chucks are available in HSK-A63, HSKA100, BT 40 and Seco-Capto™ C5 machine side connections. EPB 5831 can accommodate 6 mm, 8 mm, 10 mm and 12 mm tool diameters and is offered in projection lengths of 150 mm and 200 mm. ER-to-Combimaster™ holders are available in 25, 32 and 40 ER sizes and five thread-size connections ranging from M8 to M20. Holders come with ER taper,...
Read More »
ROTA NCR Precision 6-Jaw Compensation Chuck
The clamping of thin-walled and easily deformed components can be difficult. SCHUNK offers the 6-jaw ROTA NCR from our lineup for this challenging clamping scenario; with standard chuck diameters ranging all the way from Ø165 to Ø1200mm, for large workpieces. The 6-jaw NCR chucks strengths lie in its 3 pairs of radially compensating jaws which more equally distribute the chuck clamp force about...
Read More »
The Future of Electric Motors in the Automobile Industry
This eBook discusses the future of electric parts in the automobile industry and some of the challenges associated with them, while offering expert solutions.
Read More »
EMAG at CMTS 2017, Booth 2418!
At CMTS 2017, September 25-28 at the International Centre in Mississauga, ON - EMAG L.L.C. will feature a variety of our manufacturing systems for precision metal components. The modular VL Series for chucked components will be on display, with our VL 4 machine, for visitors to experience the successful EMAG modular inverted vertical lathe design. With the goal to develop a system of modular...
Read More »
Baby Chuck 25N delivers 0.003 mm runout precision.
Used for cutting tools with diameter up to ø25.4 mm, Baby Chuck 25N design is available in six collet series sizes. Featuring clamping range of ø.610 in. - 1.000 in., unit is designed in BIG-PLUS® (SK/BT), HSK and BIG Capto models. Chuck’s thrust ball bearings eliminate distortion of collet during tightening. Delivering 1 micron runout accuracy at collet nose, product is suitable for high...
Read More »
Mega ER Grip Collet Chucks meet ISO15488 standards.
Offering clamping nut options, Mega ER Grip Collet Chucks can perform well in clamping force, concentricity, rigidity and balance at high spindle speeds areas. Providing accuracy of 00012 in. at 5 x D, unit comes with Mega ER nut, solid nut, Mega ER seal system and standard ER nut clamping options. Enhancing tool projection and rigidity, chucks are included with BBT30, BBT40 and BBT50 tapers...
Read More »
Hydraulic Chucks can be clamped to drills directly without reduction sleeve.
Suitable for finishing processes with drills, reamers, ball mills, end mills, diamond reamers and grinding tools, Slim Hydraulic Chucks feature 14 mm diameter chuck nose and 40 mm gauge length. Designed for HSK-E 25, HSK-E 32 and HSK-E 40 machine spindles, units can be clamped directly to cutting tools with shank diameter of 3 or 4 mm. Each tool is balanced to deliver speeds up to 60,000 rpm and...
Read More »
RÖHM Features Advanced Workholding Technologies at PMTS
SUWANEE, Ga., March 31, 2017 – In booth 1231 at PMTS 2017, RÖHM Products of America will highlight a broad selection of its innovative workholding products that show the company’s strength as a one-stop solutions provider. Featured technologies include the modular CAPTIS clamping system; the AGILIS, ABSIS and MZS mandrel part-clamping systems; quick-change jaw chucks; the RZM vise; efficient...
Read More »
Milling Chuck and Boring Bars eliminate vibration.
HMC Series Milling Chuck and Smart Damper Boring Bars maintain efficient cutting speed. Featuring clamping bore with fine slots, Milling Chuck uses 12mm diameter cutter and support heavy-duty and finish end milling tasks. Designed with insert holders with 1.58 in. diameter, boring bar’s metric bodies are available in 32 and 40mm diameters. Suitable for lathe applications, bar is designed with...
Read More »
Triad's Next-Gen Power Supplies Offer Increased Reliability and Reduced Noise Performance
Triad Magnetics, an established leader in power supply design and manufacturing, is proud to announce their next generation WAU AC and WDU DC Series of power supplies. These linear wall plug-ins offer minimum noise performance without sacrificing reliability or life. See our video to learn more.
Read More »
